ASIAN SMARTCARE PAINTS

 91 000 74051  Smart Care PU Injection 1K is a hydrophobic, single-component polyurethane grouting resin that transforms into a closed-cell, rubber-like foam upon contact with water. It expands up to 27× its volume, offering excellent crack filling, deep penetration, and a constant, non-shrinking seal that resists damp proofing and maintains structural integrity without any shrinkage or swelling.Key Benefits:
Expands up to 27× for effective cavity filling
Hydrophobic, permanently foamifies on water contact
Forms a durable, waterproof, closed-cell seal
Adapts to injection pressures—results in dense or foam-like fill
Ideal For:
Sealing hairline and structural cracks in concrete
Emergency leak repair in roofs, basements, ceilings, and water-retaining structures
Areas with active water seepage or damp surfaces

Q1. What is Smart Care PU Injection 1K used for?It’s used as a grout to seal and fill cracks and water leaks. Upon injection and water contact, it expands and forms a closed-cell foam that permanently blocks seepage.
Q2. How much does it expand?This PU resin expands up to 27× its volume, effectively filling voids and cavities.
Q3. Does it swell or shrink over time?No—once cured, the foam maintains a constant volume, unaffected by water or drying.
Q4. How is it applied?Drill injection holes, insert packers, inject the resin under controlled pressure. The foam expands to seal the crack or cavity.
Q5. What is its physical form and pack size?A single-component liquid (light yellow) packed in a 10 kg pail/tin.
Q6. What’s the viscosity like?It has low viscosity, allowing exceptional penetration into fine cracks and pores.
Q7. Is it safe for wet conditions?Yes—it’s hydrophobic and forms a waterproof seal even in the presence of water.
Q8. What’s the shelf life?Approximately 1 year, when stored airtight at 0°C to 30°C.
Q9. What is the price for the 10 kg pack?Current approximate cost:
₹900 per kg (~₹11000 for 10 kg) per some listings

Prices vary by seller, region, and availability. ContactCivilize Mart for updated and bulk pricing.

Product Details:

FEVICOL SR 998 Fevicol SR 998 IS is a synthetic rubber based solvent containing contact adhesive. It exhibits excellent bond strength. The adhesive dries in a tough flexible film with good resistance to water and ageing. It can be applied by brush or roller.
KEY FEATURESFast setting and high heat stability.No harmful benzene-Non Hazardous to health.PRODUCT SPECIFICATIONSFevicol SR-998 is used in furniture manufacturing for bonding laminate to woodIt is also used for flooringIt is also used for bonding - Foam, Rubber, Rexine and Metal to each other

Product Details:

Smartcare Pre Apply HDPE 80 is a thick High density polyethylene membrane. It is a multi-layer composite waterproofing material with superior performance, including alayer of high-performance PE film, self-adhesive polymerlayer and a unique particulate layer. Unlike conventionalmembranes, this forms a bond with the wet concretepoured over it and becomes monolithic part of the structure. This prevents water ingress tracking between the unbonded membrane and structure.

Product Details:

 91 000 74051 SmartCare Bitumen Primer is a cold applied solvent based bituminous solution designed to penetrate and seal porous surfaces prior to the application of covering materials. It encourages the adhesion of bituminous waterproofing systems, sheet coverings and as primer for bitumen modified PU. 

Product Details:

91 000 74051 CICO NO.1 is yellow coloured viscous liquidbased on reactive additives and microparticles suspension with anti corrosiveproperties. This is used as an IntegralCement Waterproofing Compound forCement Concrete and Mortar. 

Product Details:

 91 000 74051 SmartCare General Purpose Grout - High-Strength, Non-Shrink Grout is a ready-to-use, cement-based powder that only needs water. It is a free-flowing, high-strength grout that does not shrink after setting, ensuring a perfect, void-free fill. It is ideal for grouting under machine base plates, anchoring bolts, filling concrete gaps, and masonry cavities.
Key Benefits:Non-Shrink & Crack Resistant: Expands slightly to compensate for shrinkage, preventing cracks.High Strength: Develops high compressive strength (25 MPa in 1 day, 65 MPa in 28 days).Easy Flow: Self-compacting and flows easily into tight spaces without bleeding or segregation.Ready to Use: Just add water for a consistent and reliable mix every time.Versatile: Suitable for foundation grouting, anchor bolts, and filling cavities.
Approximate Market Price: 390 - 690 per 25 kg bag (Contact for best price!)
Questions and Answers -:
Q1: What is this grout used for?A: It is a general-purpose grout used for:Grouting under machine base plates.Fixing anchor bolts and railings.Filling gaps between concrete members and masonry cavities.Core filling (bone packing) in concrete blocks.Q2: How much water is needed for a 25kg bag?A: You need 3.5 to 4.0 liters of clean, potable water per 25kg bag. Do not exceed 4 liters.Q3: What is the coverage or yield from one bag?A: One 25kg bag, when mixed with water, yields approximately 11.8 liters of grout. The area covered depends on the volume of the cavity being filled.Q4: What is the approximate price?A: The approximate price for a 25kg bag is 390 TO 690. Please message us for the exact price and bulk order discounts.Q5: What makes it better than a normal cement-sand mix?A: Unlike normal mortar, this grout is non-shrink, free-flowing, and develops very high strength. It ensures 100% contact without hollow spaces, which is critical for machinery foundations.Q6: How thick can it be poured in one go?A: It can be placed up to a thickness of 100 mm (10 cm) in a single pour when used as an under-base plate grout.Q7: What is the shelf life?A: It has a shelf life of 6 months from the date of manufacture when stored in a cool, dry place in its original, unopened bag.Q8: Can it be used for deep fills?A: Yes, for depths greater than 80mm, you can add 25-30% of 8-10mm aggregates by weight of the powder to reduce heat generation.Q9: How long does it take to set?A: The initial setting time is more than 5 hours, and the final setting is completed within 10 hours, giving you ample working time.

Product Details:

 91 000 74051 SmartCare Damp Proof Ultra is a fiber-reinforced elastomeric liquid-applied waterproofing membrane from Asian Paints. It is formulated with PU hybrid polymers and reinforcing acrylic fibers. On curing, it forms a seamless, durable, crack-bridging waterproofing film that protects terraces, roofs, parapets, and exterior walls against water ingress, UV rays, and fungal growth.
Key Features & Benefits
Waterproofing Strength – Resists positive hydrostatic pressure up to 10 barsCrack-Bridging – Effectively bridges cracks up to 2.5 mmThermal Comfort – Reduces surface temperature up to 10°CFiber Reinforced – Improves strength, mechanical properties & abrasion resistanceUV, Anti-Fungal & Anti-Algal – Long-term resistance against sunlight and microbial growthAnti-Carbonation – Acts as a barrier to CO₂, prolonging structural lifeWarranty – Comes with 10 years waterproofing warranty on terraces & verticals (with topcoat)
⚙️ Technical SpecificationsForm: Ready-to-use viscous liquidColor: WhiteApplication Temperature: 5°C – 35°CSpecific Gravity: ~1.15 g/ccSolids by Weight: 50.5% – 55.9%Viscosity: 124–138 KUTensile Strength: 2.90 MPaElongation: up to 350%Water Resistance: Excellent (10 rating)Alkali Resistance: 8 ratingDrying Time (Touch Dry): 4–6 hoursRecoating Interval: 4–6 hoursShelf Life: 3 years (sealed containers)Packs Available: 4 L & 20 L
FAQ (Questions & Answers)Q1. What is the coverage of SmartCare Damp Proof Ultra?Horizontal (terrace): ~10 sq. ft per liter (2 coats)Vertical (fresh painting): ~25 sq. ft per literVertical (repainting): ~35–40 sq. ft per literQ2. Can it be applied on old waterproofing layers?Yes, if the old IPS/brick-bat coba/cementitious layer is sound and cleaned.Q3. How many coats are required?Typically 2 coats of Damp Proof Ultra are applied, plus a topcoat of Apex / Ultima for durability.Q4. What is its crack bridging capacity?Bridges cracks up to 2.5 mm.Q5. What is the warranty?10 years waterproofing warranty on terraces & walls (with Asian Paints topcoat).Q6. What is the shelf life?3 years in unopened, tightly sealed containers stored in a cool, dry place.Q7. What is the approx. price?Market price ranges from ₹4,500 – ₹5,200 per 20 L drum (varies by city & dealer).

Product Details:

 91 000 74051 SmartCare PU Aqua A single-component, liquid-applied, water-based polyurethane dispersion (PUD) coating for waterproofing concrete surfaces. It cures to form a seamless, white, elastomeric membrane.
Primary Function: To provide a flexible, UV-resistant, and water-impermeable barrier for protecting concrete structures from water ingress, both internally and externally.
Key Features & Benefits :
Water-Based (Aqua): Lower VOC, less odour, and easier cleanup with water compared to solvent-based alternatives.Seamless Membrane: Forms a continuous, joint-free protective layer.UV Resistant: The white color reflects sunlight and remains stable under UV exposure, making it ideal for terraces and parapets.High Elasticity: Excellent elongation (450%) to bridge cracks up to 4mm.Excellent Weathering Resistance: Withstands harsh environmental conditions.
Q1: How is this different from other PU membranes like Flexiseal PU?A: The key difference is the base. PU Aqua is water-based, making it more user-friendly and environmentally friendly. Flexiseal PU is solvent and pitch-based, which is typically more heavy-duty and has higher solid content but comes with stronger odour and flammability precautions.
Q2: How is it applied?A:Surface Prep: Concrete must be cured (28 days), sound, and clean. Moisture content must be <5-10%. Repair all cracks and holes with an epoxy-based mortar.Priming: It is mandatory to apply SmartCare Epoxy Primer (mixed in a ratio of Resin:Hardener:Water = 1:1:2 by weight). Allow it to dry for 2-3 hours.Application: Mix the PU Aqua thoroughly. Apply the first coat. Apply the second coat after 8-10 hours in a direction perpendicular (cross-direction) to the first coat to ensure even coverage.
Q3: What is the coverage area?A: The consumption is 1.5 - 2.0 kg per square meter to achieve a 1mm Dry Film Thickness (DFT) in two coats.
Q4: How long does it take to cure? When can it be tested?A:Recoat Time: 8-10 hours between coats.Flood Test: A water test can be performed 72 hours after the final coat has been applied.
Q5: What is the shelf life?A: 2 years from the date of manufacture when stored in its original, tightly closed container in a cool, dry place.
Q6: Is it safe to use?A: As a water-based product, it is safer than solvent-based options. However, standard safety precautions apply:Wear eye protection.Keep out of reach of children.Do not ingest. Seek medical attention if swallowed.Refer to the Material Safety Data Sheet (MSDS) for detailed handling instructions.
Q7: What are its key technical properties?A:Elongation: 450%Tensile Strength: >1.5 MPaCrack Bridging: Up to 4mmSolid Content: 60%Dry Film Color: White
Q8: What is The Price Of SmartCare PU Aqua?please Visit CIVILIZEMART Its available friendly prices

Product Details:

Product Details:

An integral liquid waterproofing compound. SmartCare CemBoost 200 has superior plasticizing for cement, concrete, mortar and plasters which strengthens the cement, concrete/plaster mix and reduces water permeability.

Product Details:

 91 000 74051 SmartCare Multi-Purpose Polymer A high-performance, acrylic emulsion-based liquid polymer admixture. It is a versatile bonding agent and modifier used to significantly enhance the properties of cement-based products like tile adhesives, mortars, and plasters.
Primary Function: To act as a powerful binder that increases adhesion, flexibility, and water resistance in cement mixes, making them suitable for demanding applications like heavy tile cladding and repair work.
Key Features & Benefits:Superior Adhesion: Dramatically improves the bond strength and slip resistance of tile adhesives.Enhanced Flexibility: Adds flexibility to mortars and putties, preventing cracks due to movement or vibration.Water Resistance: Makes mixes waterproof and reduces water absorption.Impact Resistance: Improves the durability of the material against shocks.Versatile: Has multiple uses beyond tile adhesives, including as a bonding agent and in repair mortars.
Questions & Answers (Q&A)Q1: What is the main mixing ratio for tile adhesives?A: The standard ratio is 5 Liters of Polymer for every 30 kg bag of tile adhesive. First, mix the polymer with 2-3 liters of water, then add the adhesive powder while stirring.Q2: Can it be used for other purposes?A: Yes, it is highly versatile.Repair Mortar: Add 5% of the polymer by weight of cement to a 1:3 cement-sand mix.Crack-Free Putty: Mix putty and polymer in a 2:1 ratio.Bonding Slurry: Mix Cement : Polymer : Water in a 2:1:0.5 ratio by weight.Waterproof Slurry: Use the same 2:1:0.5 ratio for coating parapet walls.Q3: What surfaces can it be used on?A: It is designed for masonry surfaces (concrete, brick, plaster). It must not be used directly on wood or metal surfaces.Q4: How long should I wait before grouting?A: Wait for at least 24 hours after fixing the tiles before grouting.Q5: What are the safety precautions?A:Wear eye protection and gloves.Avoid inhalation of vapour or dust during surface preparation.Keep out of reach of children.Store in a cool, dry place with the lid tightly closed.Refer to the Material Safety Data Sheet (MSDS) for detailed information.Q6: What is the coverage area for the bonding slurry?A:As a bond coat: ~100 sq. ft. per liter for 1 coat.As a slurry coating: ~50 sq. ft. per liter for 2 coats.

Product Details:

A high performance binder is what SmartCare RepairMax 200 does. It is recommended as a repairing and bonding agent for concrete/mortar in repair like spalled concrete - floors, chajjas, beams, slabs as it bonds old and new concrete surfaces strongly with plasters. It can also be used for waterproofing of toilets, bathrooms and small terraces.

Product Details:

 91 000 74051 SmartCare Damp Block 2K - Two-Component Cementitious Waterproofing Coating is a powerful, two-part waterproofing coating (a powder and a liquid) that you mix together. It creates a highly flexible, seamless barrier that stops water seepage effectively, even under high pressure. It is ideal for waterproofing bathroom floors, balcony slabs, terrace roofs, and basement walls from both the positive (water-facing) and negative (opposite) sides.
Key Benefits:
Stops High-Pressure Water: Resists water pressure up to 5 bars, perfect for sunken areas and basements.Highly Flexible: Stretches up to 100% to bridge small cracks (up to 1.2mm) without tearing.Positive & Negative Side Waterproofing: Can be applied on the side where water enters or the opposite side.Excellent Adhesion: Bonds strongly to concrete, brick, and plaster surfaces.Prevents Efflorescence: Stops white salt stains caused by moisture.Approximate Market Price: 1200 TO 1600RS per PACK (Price varies based on pack size. Please contact CIVILIZEMART for the best quote!)
Questions and Answers:Q1: What is SmartCare Damp Block 2K used for?A: It is used for permanent waterproofing of surfaces like bathroom sunken floors, balconies, terraces, basement walls, and water tanks. It is unique because it works for waterproofing from both the same side as the water (positive) and the back side (negative).Q2: How do I mix the two components?A: Always add the powder (Part A) to the liquid (Part B). The mixing ratio is 2 parts powder to 1 part liquid by weight. Stir thoroughly to make a smooth, lump-free paste.Q3: What is the coverage area?A: For two coats, the coverage is approximately 7.5 - 8 square feet per kilogram. This means a 15kg pack will cover about 112-120 square feet with two coats.Q4: What is the approximate price?A: The approximate market price is around 1200 to 1600 per PACK. The 3kg pack is ideal for small repairs, while the 15kg pack is more economical for larger areas. Message CIVILIZEMART us for the exact price.Q5: Can it be applied on damp walls from the inside?A: Yes! This is a key feature. It is designed for negative side waterproofing, meaning you can apply it on the inner side of a wall (like a bedroom wall behind a bathroom) to stop dampness seeping through from the outside.Q6: How long does it take to dry?A: The first coat will be dry to touch in 4-6 hours. You can then apply the second coat. The second coat should be cured (kept moist) for 3-5 days for best results.Q7: Is it safe to use?A: It is safe when used correctly. Avoid ingestion and contact with eyes. Wear gloves and safety glasses during application. If contact occurs, rinse thoroughly with water.Q8: What pack sizes are available?A: It is conveniently available in 3kg and 15kg kits.Q9: Can it cover cracks?A: Yes, its flexible film can bridge hairline cracks up to 1.2 mm wide. Larger cracks must be filled with a repair mortar before application.

Product Details:

 91 000 74051Asian Paints SmartCare Repair Mortar A ready-to-use, single-component, polymer-modified cementitious mortar specifically designed for structural repair work on concrete. It is a pre-blended powder that only requires the addition of water on site.
Primary Function: To repair and restore damaged reinforced concrete (RCC) structures like beams, columns, and slabs by providing high strength, excellent adhesion, and resistance to shrinkage.
Key Features & Benefits:
Ready-to-Use: Single-component powder; just add water.Shrinkage Compensated: Dual shrinkage compensation technology minimizes cracking.High Strength: Develops high compressive (38 MPa), flexural (8 MPa), and tensile (2.5 MPa) strength.Excellent Adhesion: Bonds strongly to existing concrete and masonry substrates.Easy Application: Designed for good workability and can be applied up to 25mm thick in a single coat.
Ideal Applications :Structural repair of damaged RCC members: beams, columns, slabs.Patch repair of plain concrete (PCC) and non-reinforced masonry surfaces.Packaging: 25 kg bags.Shelf Life: 6 months from the date of manufacture when stored in a cool, dry place in its original, unopened packaging.
Questions & Answers (Q&A)Q1: What is the mixing ratio and method?A: For a 25 kg bag, use 4.75 liters of clean, potable water. This is a fixed water-powder ratio of 0.19.Method: Always add the powder to the water. Mix for at least 3 minutes using a slow-speed drill (500 RPM) fitted with a spiral paddle to achieve a lump-free consistency. Hand mixing is not recommended.Q2: What is the maximum thickness it can be applied?A: It is suitable for repairs up to 50 mm thick. However, the maximum thickness for a single coat is 25 mm. For repairs between 25mm and 50mm, apply a second coat after the first has set, using a bonding agent between layers.Q3: How do I prepare the concrete surface?A: Proper surface preparation is critical:Remove all loose, weak material, laitance, oil, grease, and paint.Mechanically roughen smooth surfaces (e.g., by scabbling).Saw-cut the edges of the repair area to a depth of 12mm to avoid feather edges.Soak the substrate with water and remove any excess (saturated surface dry condition).Q4: What is the pot life?A: The mixed mortar must be used within 60 minutes.Q5: What are the limitations?A:Minimum thickness: 10 mm.Application temperature: Between +5°C to +40°C.Do not use on surfaces that are frozen or contain frost.Strictly maintain the specified water-powder ratio; do not add extra water.Q6: What is the coverage or yield?A: One 25 kg bag, when mixed with 4.75 liters of water, yields approximately 14.1 liters of wet mortar.Q6: What is the Price Of Asian Paints SmartCare Repair Mortar?A: Approximately the price range between 460 to  599 Please Visit CIVILIZEMART For More Information

Product Details:

An SBR based, economical repair and preventive waterproofing coating, Smartcare Repair Polymer is recommended as a repairing and bonding agent for concrete/mortar in repair like spalled concrete - floors, chajjas, beams, slabs as it bonds old and new concrete surfaces strongly with plasters. It can also be used for waterproofing of toilets, bathrooms and small terraces.

Product Details:

 Smart Care PU Injection 1K is a hydrophobic, single-component polyurethane grouting resin that transforms into a closed-cell, rubber-like foam upon contact with water. It expands up to 27× its volume, offering excellent crack filling, deep penetration, and a constant, non-shrinking seal that resists damp proofing and maintains structural integrity without any shrinkage or swelling.Key Benefits:
Expands up to 27× for effective cavity filling
Hydrophobic, permanently foamifies on water contact
Forms a durable, waterproof, closed-cell seal
Adapts to injection pressures—results in dense or foam-like fill
Ideal For:
Sealing hairline and structural cracks in concrete
Emergency leak repair in roofs, basements, ceilings, and water-retaining structures
Areas with active water seepage or damp surfaces

Q1. What is Smart Care PU Injection 1K used for?It’s used as a grout to seal and fill cracks and water leaks. Upon injection and water contact, it expands and forms a closed-cell foam that permanently blocks seepage.
Q2. How much does it expand?This PU resin expands up to 27× its volume, effectively filling voids and cavities.
Q3. Does it swell or shrink over time?No—once cured, the foam maintains a constant volume, unaffected by water or drying.
Q4. How is it applied?Drill injection holes, insert packers, inject the resin under controlled pressure. The foam expands to seal the crack or cavity.
Q5. What is its physical form and pack size?A single-component liquid (light yellow) packed in a 10 kg pail/tin.
Q6. What’s the viscosity like?It has low viscosity, allowing exceptional penetration into fine cracks and pores.
Q7. Is it safe for wet conditions?Yes—it’s hydrophobic and forms a waterproof seal even in the presence of water.
Q8. What’s the shelf life?Approximately 1 year, when stored airtight at 0°C to 30°C.
Q9. What is the price for the 10 kg pack?Current approximate cost:
₹900 per kg (~₹11000 for 10 kg) per some listings

Prices vary by seller, region, and availability. ContactCivilize Mart for updated and bulk pricing.

Product Details:

 91 000 74051 SmartCare Flexiseal PU  A single-component, pitch-modified, polyurethane liquid waterproofing membrane. It is cold-applied and cures by reacting with moisture in the air to form a seamless, highly elastic, and durable waterproofing layer.
Primary Function: To provide a high-performance, flexible barrier that protects structures from water ingress, both above and below ground. It is designed to bridge cracks and accommodate structural movement.
Key Features & Benefits:
High Elasticity: Exceptional elongation (600-900%) to bridge cracks and handle movement.Seamless Membrane: Forms a continuous, joint-free layer.High Solid Content (86%): Provides a thick film build-up in a single coat.Excellent Adhesion: Bonds to a wide range of substrates (concrete, masonry, brick, etc.).Chemical & Thermal Resistant: Stable in aggressive conditions and from -40°C to +70°C.Root Resistance: Suitable for planter boxes and green roofs.Easy Application: Can be applied by brush, roller, or airless spray.
Q1: How is this product applied?A:Surface Prep: The concrete must be sound, level, and clean (free of dust, oil). Moisture must be <5%. Repair all holes and cracks.Priming: Priming is generally not needed on sound surfaces. For porous or very smooth surfaces, a primer coat (Flexiseal PU diluted 40% with Solvalux thinner) is recommended.Crack Treatment: Seal large cracks and joints with SmartCare Unoverseal PU Sealant and reinforce with a fiber mesh strip embedded in Flexiseal PU.Application: Apply to achieve a Dry Film Thickness (DFT) of 1mm to 2mm. This can be done in one or two coats. On vertical surfaces, apply a maximum of 0.5mm per coat.Curing: Allow it to fully cure for 7 days before subjecting it to water.
Q2: What is the coverage area?A: 1 liter covers 1 square meter at a 1mm DFT on a smooth surface. Rough or textured surfaces will require more product.Q3: How long does it take to dry and cure?A:Touch Dry: 15 - 24 hours (at 25°C, 50% RH)Full Cure: 7 days (to achieve full properties)Flood Test: Can be conducted after 7 days of application.Q4: Does it require a protective layer?A: Yes, absolutely. The membrane must be protected from exposure and mechanical damage.Horizontal surfaces: Protect with a 250 GSM geotextile separation layer and a concrete screed (M20 grade).Vertical surfaces: Protect with plaster, screed, or a protection board before backfilling.It should never be left exposed to the open sky.Q5: What is the shelf life?A: 12 months from the date of manufacture when stored in its original, sealed container in a cool, dry, shaded place away from heat sources.Q6: What are the safety precautions?A: The product contains bitumen and solvents.Avoid smoking, naked flames, or sparks near the product.Wear gloves, safety goggles, and a nose pad during application.Ensure good ventilation.In case of contact with skin or eyes, rinse immediately with plenty of water and seek medical advice if necessary.Always refer to the Material Safety Data Sheet (MSDS).Q7: How are tools cleaned?A: Clean equipment immediately after use with Solvalux 7-25 thinner.