CEMENTITIOUS WATER PROOFING CHEMICALS

Product Details:

91 000 74051 SikaTop®-551 Seal is a two-component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials.It is manufactured locally in India . SikaTop®-551 Seal provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SikaTop®-551 Seal provides a hard wearing, seamless, waterproof membrane for wet areas, roofs and foundation protection.

Product Details:

91 000 74051 SikaTop®-551 Seal is a two-component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials.It is manufactured locally in India . SikaTop®-551 Seal provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SikaTop®-551 Seal provides a hard wearing, seamless, waterproof membrane for wet areas, roofs and foundation protection.

Product Details:

 91 000 74051 AquaArm TG by MYK Arment is a two-component, cementitious, polymer-dispersion-based waterproof coating designed to provide a flexible, breathable, and abrasion-resistant protective barrier for concrete and masonry. Its solvent-free liquid component ensures safe and sustainable application.
Key Features:
Highly flexible & breathable—ideal for surfaces like balconies, terraces, chajjas, and bathrooms
Self-curing—no external curing required under normal conditions
Strong adhesion to damp surfaces, forming a long-lasting waterproof barrier
Application Instructions:
Surface Prep: Substrate must be sound, clean, and pre-wetted to saturation (SSD condition). Smooth areas should be roughened for better bonding; all cracks or defects repaired beforehand
Mixing Ratio: Blend Pre-weighed powder (Component A) and Polymer liquid (Component B) in a 7.5 : 2.5 weight ratio using a slow-drill mixer at ~350–400 rpm for 3–4 minutes, ensuring a lump-free, homogeneous slurry
Application: Apply in two coats—first horizontally, then vertically after 4–6 hours at ~30 °C. Typical consumption: 1.5–2.5 kg/m² per coat, depending on requirements
Curing Timeline: Surface becomes rain-resistant after ~4 hours on vertical surfaces and ~12 hours on horizontal ones (at 30 °C); foot traffic may resume after ~2 days

Q1. What is AquaArm TG used for?It’s a two-part waterproof coating designed for flexible, breathable protection on balconies, terraces, bathrooms, roofs, and chajjas.
Q2. Is it easy to apply?Yes—mix and apply by brush in two coats. Easy to handle and ideal for complex surfaces.
Q3. Can it be applied on damp concrete?Absolutely. It bonds excellently with pre-wetted surfaces and cures without issues.
Q4. How fast does it cure and become rain-resistant?At around 30 °C, vertical surfaces are rainproof in ~4 hours, and horizontal surfaces in ~12 hours—usable for foot traffic after ~2 days.
Q5. What is the recommended consumption rate?Typically 1.5–2.5 kg/m² per coat, varying with surface texture and condition.
Q6. What packaging sizes are available?Available in composite packs (A+B) of 40 kg.Q7. Is it durable and long-lasting?Yes: the coating is flexible, abrasion-resistant, breathable, and forms a durable waterproof barrier.
Q8. Is it non-toxic and eco-friendly?Yes—solvent-free, with non-toxic components safe for regular handling.
Q9. What is the shelf life and storage guideline?Store in a cool, dry place. Shelf life typically lasts 6 to 12 months in sealed condition.

Q10. What is the price?Average wholesale price is approximately ₹88 per kg based on 40 kg packaging (subject to variation by region and supplier)For the latest pricing, contact CivilizeMart.

Product Details:

 91 000 74051 AquaArm TG by MYK Arment is a two-component, cementitious, polymer-dispersion-based waterproof coating designed to provide a flexible, breathable, and abrasion-resistant protective barrier for concrete and masonry. Its solvent-free liquid component ensures safe and sustainable application.Key Features:
Highly flexible & breathable—ideal for surfaces like balconies, terraces, chajjas, and bathrooms
Self-curing—no external curing required under normal conditions
Strong adhesion to damp surfaces, forming a long-lasting waterproof barrier
Application Instructions:
Surface Prep: Substrate must be sound, clean, and pre-wetted to saturation (SSD condition). Smooth areas should be roughened for better bonding; all cracks or defects repaired beforehand
Mixing Ratio: Blend Pre-weighed powder (Component A) and Polymer liquid (Component B) in a 7.5 : 2.5 weight ratio using a slow-drill mixer at ~350–400 rpm for 3–4 minutes, ensuring a lump-free, homogeneous slurry
Application: Apply in two coats—first horizontally, then vertically after 4–6 hours at ~30 °C. Typical consumption: 1.5–2.5 kg/m² per coat, depending on requirements
Curing Timeline: Surface becomes rain-resistant after ~4 hours on vertical surfaces and ~12 hours on horizontal ones (at 30 °C); foot traffic may resume after ~2 days

Q1. What is AquaArm TG used for?It’s a two-part waterproof coating designed for flexible, breathable protection on balconies, terraces, bathrooms, roofs, and chajjas.
Q2. Is it easy to apply?Yes—mix and apply by brush in two coats. Easy to handle and ideal for complex surfaces.
Q3. Can it be applied on damp concrete?Absolutely. It bonds excellently with pre-wetted surfaces and cures without issues.
Q4. How fast does it cure and become rain-resistant?At around 30 °C, vertical surfaces are rainproof in ~4 hours, and horizontal surfaces in ~12 hours—usable for foot traffic after ~2 days.
Q5. What is the recommended consumption rate?Typically 1.5–2.5 kg/m² per coat, varying with surface texture and condition.
Q6. What packaging sizes are available?Available in composite packs (A+B) of 40 kg.
Q7. Is it durable and long-lasting?Yes: the coating is flexible, abrasion-resistant, breathable, and forms a durable waterproof barrier.
Q8. Is it non-toxic and eco-friendly?Yes—solvent-free, with non-toxic components safe for regular handling.
Q9. What is the shelf life and storage guideline?Store in a cool, dry place. Shelf life typically lasts 6 to 12 months in sealed condition.

Q10. What is the price?Average wholesale price is approximately ₹88 per kg based on 40 kg packaging (subject to variation by region and supplier)For the latest pricing, contact CivilizeMart.

Product Details:

 91 000 74051 AquaArm TG by MYK Arment is a two-component, cementitious, polymer-dispersion-based waterproof coating designed to provide a flexible, breathable, and abrasion-resistant protective barrier for concrete and masonry. Its solvent-free liquid component ensures safe and sustainable application.Key Features:
Highly flexible & breathable—ideal for surfaces like balconies, terraces, chajjas, and bathrooms
Self-curing—no external curing required under normal conditions
Strong adhesion to damp surfaces, forming a long-lasting waterproof barrier
Application Instructions:
Surface Prep: Substrate must be sound, clean, and pre-wetted to saturation (SSD condition). Smooth areas should be roughened for better bonding; all cracks or defects repaired beforehand
Mixing Ratio: Blend Pre-weighed powder (Component A) and Polymer liquid (Component B) in a 7.5 : 2.5 weight ratio using a slow-drill mixer at ~350–400 rpm for 3–4 minutes, ensuring a lump-free, homogeneous slurry
Application: Apply in two coats—first horizontally, then vertically after 4–6 hours at ~30 °C. Typical consumption: 1.5–2.5 kg/m² per coat, depending on requirements
Curing Timeline: Surface becomes rain-resistant after ~4 hours on vertical surfaces and ~12 hours on horizontal ones (at 30 °C); foot traffic may resume after ~2 days

Q1. What is AquaArm TG used for?It’s a two-part waterproof coating designed for flexible, breathable protection on balconies, terraces, bathrooms, roofs, and chajjas.
Q2. Is it easy to apply?Yes—mix and apply by brush in two coats. Easy to handle and ideal for complex surfaces.
Q3. Can it be applied on damp concrete?Absolutely. It bonds excellently with pre-wetted surfaces and cures without issues.
Q4. How fast does it cure and become rain-resistant?At around 30 °C, vertical surfaces are rainproof in ~4 hours, and horizontal surfaces in ~12 hours—usable for foot traffic after ~2 days.
Q5. What is the recommended consumption rate?Typically 1.5–2.5 kg/m² per coat, varying with surface texture and condition.
Q6. What packaging sizes are available?Available in composite packs (A+B) of 40 kg.
Q7. Is it durable and long-lasting?Yes: the coating is flexible, abrasion-resistant, breathable, and forms a durable waterproof barrier.
Q8. Is it non-toxic and eco-friendly?Yes—solvent-free, with non-toxic components safe for regular handling.
Q9. What is the shelf life and storage guideline?Store in a cool, dry place. Shelf life typically lasts 6 to 12 months in sealed condition.

Q10. What is the price?Average wholesale price is approximately ₹88 per kg based on 40 kg packaging (subject to variation by region and supplier)For the latest pricing, contact CivilizeMart.