Civilize Mart

91 000 74051 CICO POXY 21 LV is a two component solvent free, low viscosity, Free flowing, and normal curing epoxy resin system designed specially for pressure injection intoconcrete for carrying out structural repairs. Due to its low viscosity it can be injected in to extremely fine cracks also. The cured resin possesses high mechanical strength, excellent adhesion, practically no shrinkage and a chemical resistance typical of all epoxy resin system. Fine cracks and small voids can be successfully sealed with CICO POXY 21 LV. Although CICO POXY 21 LV has very high strength, the cured material is not brittle and remains slightly flexible. CICO POXY 21 LV is supplied in premeasured quantities as component A-Resin and Component BHardener. 

 91 000 74051 CICO POLYGROUT is a low viscosity liquidwhich reacts with water in a controlled mannerto form a swelling, resilient adhesive solid indensities and strength appropriate to thedesignated task. When injected underpressure into leaking structures, through theprocess of polymerization, a permanentflexible water barrier is formed.The liquid retains its initial low viscosity uponcontacting water allowing it to flow withoutdilution. Once the CICO POLYGROUT waterreaction commences, the grout expandspenetrating into its surrounding and quicklycures to a tough, adhesive solid to repel theinfluence of underground seepage flow andsolidify the objective ground which isunaffected by corrosive environments. 

 91 000 74051 CICO POLYGROUT is a low viscosity liquidwhich reacts with water in a controlled mannerto form a swelling, resilient adhesive solid indensities and strength appropriate to thedesignated task. When injected underpressure into leaking structures, through theprocess of polymerization, a permanentflexible water barrier is formed.The liquid retains its initial low viscosity uponcontacting water allowing it to flow withoutdilution. Once the CICO POLYGROUT waterreaction commences, the grout expandspenetrating into its surrounding and quicklycures to a tough, adhesive solid to repel theinfluence of underground seepage flow andsolidify the objective ground which isunaffected by corrosive environments. 

 91 000 74051 CICO POLYGROUT is a low viscosity liquidwhich reacts with water in a controlled mannerto form a swelling, resilient adhesive solid indensities and strength appropriate to thedesignated task. When injected underpressure into leaking structures, through theprocess of polymerization, a permanentflexible water barrier is formed.The liquid retains its initial low viscosity uponcontacting water allowing it to flow withoutdilution. Once the CICO POLYGROUT waterreaction commences, the grout expandspenetrating into its surrounding and quicklycures to a tough, adhesive solid to repel theinfluence of underground seepage flow andsolidify the objective ground which isunaffected by corrosive environments. 

 91 000 74051 CICO POLYGROUT is a low viscosity liquidwhich reacts with water in a controlled mannerto form a swelling, resilient adhesive solid indensities and strength appropriate to thedesignated task. When injected underpressure into leaking structures, through theprocess of polymerization, a permanentflexible water barrier is formed.The liquid retains its initial low viscosity uponcontacting water allowing it to flow withoutdilution. Once the CICO POLYGROUT waterreaction commences, the grout expandspenetrating into its surrounding and quicklycures to a tough, adhesive solid to repel theinfluence of underground seepage flow andsolidify the objective ground which isunaffected by corrosive environments. 

 91 000 74051 CICO POLYGROUT is a low viscosity liquidwhich reacts with water in a controlled mannerto form a swelling, resilient adhesive solid indensities and strength appropriate to thedesignated task. When injected underpressure into leaking structures, through theprocess of polymerization, a permanentflexible water barrier is formed.The liquid retains its initial low viscosity uponcontacting water allowing it to flow withoutdilution. Once the CICO POLYGROUT waterreaction commences, the grout expandspenetrating into its surrounding and quicklycures to a tough, adhesive solid to repel theinfluence of underground seepage flow andsolidify the objective ground which isunaffected by corrosive environments. 

 91 000 74051 CICO POLYGROUT is a low viscosity liquidwhich reacts with water in a controlled mannerto form a swelling, resilient adhesive solid indensities and strength appropriate to thedesignated task. When injected underpressure into leaking structures, through theprocess of polymerization, a permanentflexible water barrier is formed.The liquid retains its initial low viscosity uponcontacting water allowing it to flow withoutdilution. Once the CICO POLYGROUT waterreaction commences, the grout expandspenetrating into its surrounding and quicklycures to a tough, adhesive solid to repel theinfluence of underground seepage flow andsolidify the objective ground which isunaffected by corrosive environments. 

 91 000 74051 CICO POLYGROUT is a low viscosity liquidwhich reacts with water in a controlled mannerto form a swelling, resilient adhesive solid indensities and strength appropriate to thedesignated task. When injected underpressure into leaking structures, through theprocess of polymerization, a permanentflexible water barrier is formed.The liquid retains its initial low viscosity uponcontacting water allowing it to flow withoutdilution. Once the CICO POLYGROUT waterreaction commences, the grout expandspenetrating into its surrounding and quicklycures to a tough, adhesive solid to repel theinfluence of underground seepage flow andsolidify the objective ground which isunaffected by corrosive environments. 

91 000 74051 CICO POXY 21 LV is a two component solvent free, low viscosity, Free flowing, and normal curing epoxy resin system designed specially for pressure injection intoconcrete for carrying out structural repairs. Due to its low viscosity it can be injected in to extremely fine cracks also. The cured resin possesses high mechanical strength, excellent adhesion, practically no shrinkage and a chemical resistance typical of all epoxy resin system. Fine cracks and small voids can be successfully sealed with CICO POXY 21 LV. Although CICO POXY 21 LV has very high strength, the cured material is not brittle and remains slightly flexible. CICO POXY 21 LV is supplied in premeasured quantities as component A-Resin and Component BHardener. 

CICO GROUT-V1 is chloride free cement based free flowing non metallic grout that develops very early high compressivestrengths. CICO GROUT-V1 was developed in answer to the disadvantages of existing grout mixtures. Its wide acceptance and extensive test indicate that CICO GROUT-V1 is a proven and established product of excellent qualityUSESCICO GROUT-V1 is used and specified by major utilities like steel projects, paper mills, highway departments and machinery and turbine manufacturers far and wide. CICO GROUT-V1 is a proven international nonmetallic grout.

 91 000 74051 Cico Crack SealCrack Filler for Internal & External Surface Cracks in PlasterCico Crack Seal is a Ready to Use Selected Elastomeric Polymer Based Crack Filling Compound for Internal and External Plastered Surfaces.UsesCico Crack Seal is Used to Seal Thermal Cracks of Plaster, Concrete, Rendering, Etc

CICO CHEM 2 P is a single component solvent based polyurethane compound recommended to be used as a primer before application of polyurethane based products.
USES -:This system is generally recommended as primer coat on concrete substrate or on mastic applied surface.
APPLICATION AREAS-:
Structurally unsound layers and surface contamination must be removed mechanically. The substrate should be dry, clean and free from oil, laitance and loose particles. It can also be applied over mastic applied surface.

 91 000 74051 CICO BOND EPO
High Strength Epoxy Bonding Agent
CICO BOND EPO is two component 100% solid epoxy resin system comprising of Pack-A (Resin) and Pack-B (Hardener). It is mainly used to bond old to old concrete or new concrete or mortar to old concrete, glazed bricks, tiles.
Pack –A (Base white in colour)
Pack –B (Hardener black in colour)
USES
CICO BOND EPO provides a bond of far better strength than the Bond/Tensile strength of concrete itself, and suitable wherever structural bonding of new to existing old concrete is carried out. It is used as adhesive to bond old concrete to new concrete, stone cladding, metal plates, etc. 

A two part chemically cured, water basedepoxy sealer membrane for most porousbuilding components.USESFor curing, seepage and dampness problemson interior or exterior concrete /plasteredsurfaces of basements, tunnels, lift wells,retaining walls, floors, below grade car parks,etc. Excellent on fresh concrete after it hashardened and is ideal as waterproofingmembrane on concrete floor slabs undercarpets and other floor coverings.

91 000 74051 CICO HYDROGUARD ACR 300 is a single Component cold applied Elastomeric waterproofing coating based on synthetic resin emulsion. Due to its excellent flexibility and thixotropic nature it is an ideal product for vertical and horizontal surfaces. It is a single pack, very economical and pollution free waterproof coating. it has excellent solar insulation capacity because of its white color.

91 000 74051 CICO NO.1 is yellow coloured viscous liquidbased on reactive additives and microparticles suspension with anti corrosiveproperties. This is used as an IntegralCement Waterproofing Compound forCement Concrete and Mortar. 

 91 000 74051 CICO No. 2 Plugging Liquid An extra-fast setting, red-colored liquid admixture used to instantly stop active, high-pressure water leaks in concrete structures. It is a plugging compound, not a general waterproofing agent.
Primary Function: To react extremely rapidly with cement, causing it to set within 30-60 seconds. This creates an instantaneous plug to stop water gushing through holes, cracks, and pipe penetrations.
Key Features & Benefits (from TDS):Ultra-Rapid Setting: Sets in 30 to 60 seconds, allowing for instant leak stoppage.High Early Strength: Forms a strong plug within 4-5 minutes of application.Simple Application: Mixed with cement to form a putty that is pressed into the leaking hole.Excellent Adhesion: Bonds strongly to concrete even under water pressure.Chloride-Free: Will not cause corrosion of embedded steel reinforcement.
Q1: How do I use CICO No. 2 to stop a leak?A:Prepare the Hole: Chip the leaking hole to form a concave shape (wider inside, narrower at the entrance).Prepare the Plug: Mix Ordinary Portland Cement (OPC) with 30-40% of its weight in CICO No. 2 liquid to form a stiff, putty-like gel.Plug the Leak: Quickly press this gel mixture firmly into the prepared hole.Hold: Maintain firm pressure on the plug for 4-5 minutes until it sets and the leak stops.Q2: Can I dilute it with water?A: No. Absolutely not. The TDS explicitly states: "It cannot be diluted with water." You mix the liquid directly with dry cement.Q3: How fast does it work?A: It is incredibly fast:Initial Setting Time: 30 to 60 seconds.Plug Formation: A watertight seal is achieved within 4-5 minutes of application under pressure.Q4: Is it compatible with all types of cement?A: It is designed for use with Ordinary Portland Cement (OPC). The TDS states it is "not compatible with other admixtures." Do not use it with fly ash-based cement (PPC) or any other mix that contains other chemicals.Q5: What is the shelf life?A: 18 months from the date of manufacture when stored in its original, unopened container in a cool place, protected from extreme heat.Q6: Is it safe to handle?A: It is non-toxic and non-flammable. However, it is highly alkaline. You must wear gloves and safety glasses to prevent skin and eye contact.

 91 000 74051 CICO NO.3 is high versatile free flowing colorless concrete additives in liquidform. It is used as quick setting cum rapid hardening admixture for concreteand plaster. This is also used as Antifreeze/deicing compound for plainconcrete in sub zero climatic conditions.USES CICO NO.3 is used in underground basement, tunnels, emergency repair andstop huge ingress of water through structures, such as swimming pool, watertreatment plant, reservoir etc. CICO No.3 is also used for execution ofunderground waterproofing work which restricts the water ingress for finalwaterproofing treatment.It is also used in factory for emergency repair during short duration of shutdown.CICO No.3 is used for pointing of leaky joints. 

91 000 74051 CICO SEALANT T 680 is two packPolysulphide based joint sealant andavailable in GUN GRADE and POUR GRADE.CICO SEALANT T 680 gun grade is gunapplied, non-sag type for vertical joints andCICO SEALANT T 680 pour grade is forhorizontal movement joints. When twopacks are mixed, i.e. Polysulphide resin(Pack-A) with curing agent (Pack-B), it formstough, flexible, durable rubber like materialwith strong adhesive property on mostbuilding substrates and joints.

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

91 000 74051 CICO THERMOSEAL – XL is water basedelastomeric high build paint for concreteroofs and exterior walls. CICO THERMOSEAL –XL is heavily filled with specially selectedhollow ceramic micro sphere and titanium dioxide.FUNCTIONCICO THERMOSEAL – XL has dual effects.Firstly, it reflects more than 80% of sun raysthereby heating of roof surface reducesremarkably due to high amount of Titanium dioxide. Secondly, transfer of heat from roofsurface is blocked due presence of ceramicmicro sphere. When it is applied on exteriorside walls and roof it reduces energy costapproximately 20%. 

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

91 000 74051 CICO HYDROGUARD ACR 300 is a single Component cold applied Elastomeric waterproofing coating based on synthetic resin emulsion. Due to its excellent flexibility and thixotropic nature it is an ideal product for vertical and horizontal surfaces. It is a single pack, very economical and pollution free waterproof coating. it has excellent solar insulation capacity because of its white color.

 91 000 74051 CICO SUPER is normal setting integral cement waterproofing compound for concrete and mortar/plaster with normal plasticizing property in liquid form. CICO SUPER is a blend of specialty active ingredients to make concrete waterproof when there is permeability through hydrostatic pressure or capillary absorption

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

 91 000 74051 Cico Crack SealCrack Filler for Internal & External Surface Cracks in PlasterCico Crack Seal is a Ready to Use Selected Elastomeric Polymer Based Crack Filling Compound for Internal and External Plastered Surfaces.UsesCico Crack Seal is Used to Seal Thermal Cracks of Plaster, Concrete, Rendering, Etc

91 000 74051 CICO NO.1 is yellow coloured viscous liquidbased on reactive additives and microparticles suspension with anti corrosiveproperties. This is used as an IntegralCement Waterproofing Compound forCement Concrete and Mortar. 

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

 91 000 74051 CICO Tapecrete P-151 An acrylic-based polymer-modified cementitious coating supplied as a liquid polymer. It is designed to be mixed with cement and sand to create a flexible, durable, and waterproof slurry for surface treatment, protection, and repair of concrete and masonry.
Primary Function: To enhance the properties of cement, overcoming its shortcomings like poor adhesion, low flexural strength, and fragility. When mixed with cement, it forms a composite coating that provides excellent waterproofing, bond strength, and chemical resistance.
Key Features & Benefits (from TDS):Flexible & Waterproof: Creates a tough, flexible, and seamless waterproofing membrane.Excellent Adhesion: Bonds strongly to most building materials (concrete, masonry).Vapour Permeable: Allows trapped moisture to escape, preventing blistering and peeling.Chemically Resistant: Unaffected by UV light, mild acids, strong alkalis, and continuous wet conditions.Durable & Safe: Non-flammable, non-toxic, and its properties improve with age.Easy Application: Can be applied by brush on horizontal and vertical surfaces.
Packaging: Available in HDPE containers of 0.5 kg, 1 kg, 5 kg, 10 kg, 20 kg, 50 kg, 100 kg, and 200 kg.
Q1: How do I mix TAPECRETE P151?A: The standard mixing ratio for a coating slurry is:For Coating: 1 kg TAPECRETE P151 : 2 kg Cement (by weight). Mix thoroughly to a smooth, homogeneous slurry.For Filler (to fill depressions): 0.50 kg TAPECRETE P151 : 1 kg Cement : 1.5 kg Silica Sand.Q2: What is the application process?A:Surface Prep: Clean the surface thoroughly (scarify, grind, or water blast). Remove all dust and loose material.Pre-wet: The concrete surface must be thoroughly pre-wetted. Before application, remove standing water so the surface is only damp.Apply: Apply the mixed slurry by brush. Two or more coats are recommended.Drying: Allow the first coat to air dry for 5-6 hours before applying the next coat.Curing: After the final coat, allow 2-6 hours of air drying, then apply moist curing by spraying water for the next 24 hours.Q3: What is the coverage area?A: For a two-coat system on concrete:You will need 0.75 kg of Cement and 0.375 kg of TAPECRETE P151 polymer per square meter.Q4: What is the shelf life and how should it be stored?A: Store in a sealed container in a dry, cool place (5°C to 30°C). Do not allow it to freeze. The typical shelf life is 12 months from the date of manufacture under these conditions.Q5: Can it be used without cement?A: No. The TDS explicitly states: "CICO TAPECRETE P151 should not be used without addition of cement." It is a polymer additive, not a standalone product.Q6: Is it safe for potable water tanks?A: The datasheet states it is highly durable in continuous wet conditions and is non-toxic. However, for potable water tanks, always check for specific local potable water certifications before use.Q7: What is the full cure time?A: The product reaches full cure in 14 days. It can be submerged in water after 2 days of air drying following the 24-hour moist curing period.Q8: What is the bond strength?A: It develops excellent bond strength. The typical 14-day bond strength is a minimum of 2.0 N/mm² (or concrete failure, meaning the concrete itself fails before the bond does).

 91 000 74051 CICO BOND EPO
High Strength Epoxy Bonding Agent
CICO BOND EPO is two component 100% solid epoxy resin system comprising of Pack-A (Resin) and Pack-B (Hardener). It is mainly used to bond old to old concrete or new concrete or mortar to old concrete, glazed bricks, tiles.
Pack –A (Base white in colour)
Pack –B (Hardener black in colour)
USES
CICO BOND EPO provides a bond of far better strength than the Bond/Tensile strength of concrete itself, and suitable wherever structural bonding of new to existing old concrete is carried out. It is used as adhesive to bond old concrete to new concrete, stone cladding, metal plates, etc. 

 91 000 74051 Cico Crack SealCrack Filler for Internal & External Surface Cracks in PlasterCico Crack Seal is a Ready to Use Selected Elastomeric Polymer Based Crack Filling Compound for Internal and External Plastered Surfaces.UsesCico Crack Seal is Used to Seal Thermal Cracks of Plaster, Concrete, Rendering, Etc

 91 000 74051 Cico Crack SealCrack Filler for Internal & External Surface Cracks in PlasterCico Crack Seal is a Ready to Use Selected Elastomeric Polymer Based Crack Filling Compound for Internal and External Plastered Surfaces.UsesCico Crack Seal is Used to Seal Thermal Cracks of Plaster, Concrete, Rendering, Etc

91 000 74051 CICO NO.1 is yellow coloured viscous liquidbased on reactive additives and microparticles suspension with anti corrosiveproperties. This is used as an IntegralCement Waterproofing Compound forCement Concrete and Mortar. 

91 000 74051 CICO NO.1 is yellow coloured viscous liquidbased on reactive additives and microparticles suspension with anti corrosiveproperties. This is used as an IntegralCement Waterproofing Compound forCement Concrete and Mortar. 

91 000 74051 CICO NO.1 is yellow coloured viscous liquidbased on reactive additives and microparticles suspension with anti corrosiveproperties. This is used as an IntegralCement Waterproofing Compound forCement Concrete and Mortar. 

 91 000 74051 CICO No. 2 Plugging Liquid An extra-fast setting, red-colored liquid admixture used to instantly stop active, high-pressure water leaks in concrete structures. It is a plugging compound, not a general waterproofing agent.
Primary Function: To react extremely rapidly with cement, causing it to set within 30-60 seconds. This creates an instantaneous plug to stop water gushing through holes, cracks, and pipe penetrations.
Key Features & Benefits (from TDS):Ultra-Rapid Setting: Sets in 30 to 60 seconds, allowing for instant leak stoppage.High Early Strength: Forms a strong plug within 4-5 minutes of application.Simple Application: Mixed with cement to form a putty that is pressed into the leaking hole.Excellent Adhesion: Bonds strongly to concrete even under water pressure.Chloride-Free: Will not cause corrosion of embedded steel reinforcement.
Q1: How do I use CICO No. 2 to stop a leak?A:Prepare the Hole: Chip the leaking hole to form a concave shape (wider inside, narrower at the entrance).Prepare the Plug: Mix Ordinary Portland Cement (OPC) with 30-40% of its weight in CICO No. 2 liquid to form a stiff, putty-like gel.Plug the Leak: Quickly press this gel mixture firmly into the prepared hole.Hold: Maintain firm pressure on the plug for 4-5 minutes until it sets and the leak stops.Q2: Can I dilute it with water?A: No. Absolutely not. The TDS explicitly states: "It cannot be diluted with water." You mix the liquid directly with dry cement.Q3: How fast does it work?A: It is incredibly fast:Initial Setting Time: 30 to 60 seconds.Plug Formation: A watertight seal is achieved within 4-5 minutes of application under pressure.Q4: Is it compatible with all types of cement?A: It is designed for use with Ordinary Portland Cement (OPC). The TDS states it is "not compatible with other admixtures." Do not use it with fly ash-based cement (PPC) or any other mix that contains other chemicals.Q5: What is the shelf life?A: 18 months from the date of manufacture when stored in its original, unopened container in a cool place, protected from extreme heat.Q6: Is it safe to handle?A: It is non-toxic and non-flammable. However, it is highly alkaline. You must wear gloves and safety glasses to prevent skin and eye contact.

 91 000 74051 CICO No. 2 Plugging Liquid An extra-fast setting, red-colored liquid admixture used to instantly stop active, high-pressure water leaks in concrete structures. It is a plugging compound, not a general waterproofing agent.
Primary Function: To react extremely rapidly with cement, causing it to set within 30-60 seconds. This creates an instantaneous plug to stop water gushing through holes, cracks, and pipe penetrations.
Key Features & Benefits (from TDS):Ultra-Rapid Setting: Sets in 30 to 60 seconds, allowing for instant leak stoppage.High Early Strength: Forms a strong plug within 4-5 minutes of application.Simple Application: Mixed with cement to form a putty that is pressed into the leaking hole.Excellent Adhesion: Bonds strongly to concrete even under water pressure.Chloride-Free: Will not cause corrosion of embedded steel reinforcement.
Q1: How do I use CICO No. 2 to stop a leak?A:Prepare the Hole: Chip the leaking hole to form a concave shape (wider inside, narrower at the entrance).Prepare the Plug: Mix Ordinary Portland Cement (OPC) with 30-40% of its weight in CICO No. 2 liquid to form a stiff, putty-like gel.Plug the Leak: Quickly press this gel mixture firmly into the prepared hole.Hold: Maintain firm pressure on the plug for 4-5 minutes until it sets and the leak stops.Q2: Can I dilute it with water?A: No. Absolutely not. The TDS explicitly states: "It cannot be diluted with water." You mix the liquid directly with dry cement.Q3: How fast does it work?A: It is incredibly fast:Initial Setting Time: 30 to 60 seconds.Plug Formation: A watertight seal is achieved within 4-5 minutes of application under pressure.Q4: Is it compatible with all types of cement?A: It is designed for use with Ordinary Portland Cement (OPC). The TDS states it is "not compatible with other admixtures." Do not use it with fly ash-based cement (PPC) or any other mix that contains other chemicals.Q5: What is the shelf life?A: 18 months from the date of manufacture when stored in its original, unopened container in a cool place, protected from extreme heat.Q6: Is it safe to handle?A: It is non-toxic and non-flammable. However, it is highly alkaline. You must wear gloves and safety glasses to prevent skin and eye contact.