Civilize Mart

91 000 74051 CICO SEALANT T 680 is two packPolysulphide based joint sealant andavailable in GUN GRADE and POUR GRADE.CICO SEALANT T 680 gun grade is gunapplied, non-sag type for vertical joints andCICO SEALANT T 680 pour grade is forhorizontal movement joints. When twopacks are mixed, i.e. Polysulphide resin(Pack-A) with curing agent (Pack-B), it formstough, flexible, durable rubber like materialwith strong adhesive property on mostbuilding substrates and joints.

 91 000 74051 SikaLatex® SBR is a superior modified styrene butadiene emulsion to be mixed with cement slurry, cement mortar, concrete or cementitious grout for improved adhesion and water resistance properties. It is fully soluble in water and is added directly to the gauging water of slurry, mortar, concrete or grout. 

 91 000 74051 High polymer modified, grey cement-based tile adhesive suitable for fixing medium format tile/stone in interior walls/floor and exterior floor situations upto 6mm bed thickness (can be extended up to 12 mm in area of limited extent). The set adhesive is water-resistant and is suitable for use in showers and totally Plus immersed situations such as swimming pools. SILVER STAR is used for fixing mosaics, vitrified and fully vitrified tiles, terrazzo and natural stone and also for renovation (tile-over-tile) for quick & easy installation works. Note: Not recommended for direct use onto gypsum plaster (wall finishes), paint or metal.

 91 000 74051 SikaRep® Microcrete-4 is a factory-blended, high-performance, non-shrink, cementitious micro-concrete mix. Designed for deep structural repairs in concrete, it flows easily into restricted forms, compensates for shrinkage, develops rapid strength, and bonds well with old concrete. Ideal for repairing damaged beams, slabs, columns, tunnels, basements, and large gapes. 
Key Features & Benefits 
Pourable / pumpable consistency; flows easily without the need for vibration. Dual-stage expansion to compensate for plastic shrinkage and settlement.
 Rapid strength gain: strong early (1-day, 3-day) strengths enabling quicker reinstatement. High ultimate strength with good impact, vibration, chemical resistance; non-corrosive, non-toxic. Contains no added chloride, so safer for reinforced concrete.
 Adjustable consistency by controlling water: you can adjust flow / workability while maintaining properties.
Q1. What is the price per 30 kg bag?Typical posted rates are around 000 per 30 kg bag, depending on Please visit CIVILIZEMARTQ2. How much area / volume will 1 bag cover?Consumption is approximately 1,900 kg of powder per cubic meter of concrete (with water : powder = 0.15). So 30 kg covers ~0.0158 m³ ~ about 15-16 liters volume roughly. Exact depends on depth / thickness. Q3. Can it be pumped?Yes — the product is designed to be pourable/pumpable into restricted formwork without vibration. Q4. Is it safe for reinforced concrete / steel?Yes — it is non-corrosive, contains no added chloride. Q5. What is shelf life & storage?Shelf life is ~6 months from date of production if stored in unopened bags, in dry conditions, at temperature between +5-35 °C. Q6. Can the mix be adjusted for more flow?Yes — by using water-powder ratio within the recommended range (0.14 to 0.16) for higher flow, but avoid adding more water than specified as that can degrade strengths & increase shrinkage.

 91 000 74051 Bostik CrackFill is a high performance polymer modified cementitious crack sealer for sealing and repairing in internal and external cracks in plasters and masonry surface

91 000 74051 Sikagard®-67 is a water based, solvent free, odourless, epoxy resin protective coating.

91 000 74051 Sikagard®-67 is a water based, solvent free, odourless, epoxy resin protective coating.

 91 000 74051 SikaLatex® SBR is a superior modified styrene butadiene emulsion to be mixed with cement slurry, cement mortar, concrete or cementitious grout for improved adhesion and water resistance properties. It is fully soluble in water and is added directly to the gauging water of slurry, mortar, concrete or grout. 

 91 000 74051 Dr. Fixit Bathseal Select White is a single-component, ready-to-use acrylic-based flexible waterproofing coating specially formulated for bathrooms, wet zones, terraces, and internal & external walls. It has high elasticity with crack-bridging ability up to ~3 mm, excellent adhesion, durable waterproof membrane, and is applied directly with brush or roller. It protects surfaces from water seepage, dampness, and forms a seamless, white protective layer.
Key Features & BenefitsSingle component, saves time—no mixing of parts. Flexible acrylic membrane with high elongation (≈ 250 %) and crack-bridging up to ~3 mm. Low VOC content (environmentally better). Waterproof — prevents water infiltration in wet areas (bathrooms, terraces). White finish—good aesthetic, can brighten small areas.
Q1. Where is Bathseal Select White used?Bathrooms, wet zones, internal & external walls, terraces, places prone to dampness and water splash.Often used in sealing basements or on walls retained behind bathrooms.Q2. How many coats are needed and how to apply?Two coats are recommended. First coat allowed to dry, then apply second. Apply with brush/roller over clean, prepared surface.Q3. What crack width can it bridge?Up to around 3 mm crack-bridging capacity. Q4. Is it safe / what are the odor / VOC issues?Low VOC content. Single component formulation helps with ease of use.Q5. Approximate price?PLEASE VISIT CIVILIZEMART OR CONTACTQ6. What surface prep is required?Surfaces should be clean, free of loose particles, oil, mildew, dust.Repair large cracks first. Maybe prime if the substrate is very porous.