Civilize Mart

 91 000 74051 Mapei Mapeplast Super  An integral waterproofing and plasticizing chemical admixture for concrete and mortar. It is a brown liquid that disperses cement particles, reducing the water content required in a mix and making the concrete denser and more impermeable.
Primary Function: To act as a waterproofing agent from within the concrete (integral) and as a plasticizer to improve workability. It also has a slight retarding effect, slowing down the setting time, which is beneficial in hot weather and for large pours.
Key Features & Benefits (from TDS):Integral Waterproofing: Reduces the permeability of concrete, making it water-resistant throughout its mass.Plasticizing Effect: Improves workability and ease of placement for a given water content.Water Reduction: Allows for a reduction in the water/cement ratio, leading to higher strength and durability.Set Retardation: Slows down the hydration process, reducing the risk of cold joints in large pours and mitigating thermal cracking in mass concrete.Chloride-Free: Will not corrode steel reinforcement.Compatible: Can be used with other admixtures like air-entraining agents and micro-silica.
Q1: What is the recommended dosage?A: The standard dosage for integral waterproofing is 0.4% by weight of cement. This equals 0.2 kg of Mapeplast Super for every 50 kg bag of cement. Dosages can be varied between 0.2% and 0.5% depending on the required effect (workability, retardation).Q2: How and when should it be added to the concrete mix?A: For maximum effectiveness:Add it to the mixing water.Introduce it into the mixer after the other ingredients (cement, aggregates, and at least half of the mixing water) are already in.Avoid adding it directly to dry materials.Q3: Does it affect the concrete's setting time?A: Yes. It has a slight retarding action, meaning it will slow down the initial setting of the concrete. This is beneficial for large pours and in hot weather but must be planned for.Q4: Can it be used with other admixtures?A: Yes. It is compatible with:Air-entraining agents (e.g., Mapeair)Micro-silica (e.g., Mapeplast SF)Curing compounds (e.g., Mapecure)Form release agentsFly ashQ5: What is the shelf life?A: 12 months from the date of manufacture when stored in its original, closed container in a cool place, protected from rain, frost, and direct sunlight.Q6: Is it safe to handle?A: It is not classified as dangerous. However, as a professional chemical product, it is recommended to wear gloves and eye protection. Always refer to the latest Safety Data Sheet (SDS) for complete information.Q7: What is the water/cement (w/c) ratio recommendation?A: For waterproofing, aim for a w/c ratio not higher than 0.55. The exact amount of water needed will depend on the aggregates used. Start with a w/c ratio of 0.5 and adjust based on site trials.

 91 000 74051 Mapei Mapelastic Smart A two-component, highly flexible, cementitious waterproofing mortar. It is a brushable/rollable coating that cures to form a seamless, crack-bridging membrane.
Primary Function: To provide a durable, flexible, and vapour-permeable waterproofing layer for concrete and masonry, capable of bridging both static and dynamic cracks.
Key Features & Benefits :High Flexibility & Crack Bridging: Can bridge cracks over 2.5 mm wide and dynamic movements of 0.2-0.5mm Excellent Elongation: 120% elongation at break.Vapour Permeable (Class I): Allows moisture from inside the structure to escape, preventing blistering.Versatile Application: Can be applied by trowel, roller, or spray machine.Low VOC: Certified ECI Plus for very low emissions.UV Resistant: Can be left exposed or painted.
Q1: What is the mixing ratio and method?A: The ratio is fixed: 2 parts Component A (powder) : 1 part Component B (liquid) by weight. Always add the powder to the liquid and mix mechanically at low speed for ~1.5 minutes to achieve a lump-free, homogeneous consistency. Do not mix by hand.Q2: How is it applied and what is the required thickness?A: It must be applied in at least two coats to achieve a final thickness of 2 mm.Reinforcement: For critical areas (terraces, pools), embed an alkali-resistant glass fibre mesh (e.g., Mapenet ISO) in the first wet coat. For superior crack bridging on horizontal surfaces, use a polypropylene fabric (Mapetex Sel N).Recoat Time: Apply the second coat after 4-5 hours, once the first coat has hardened.Q3: What is the coverage area?A: Consumption depends on the application method:Trowel/Roller: ~1.6 kg/m² per mm of thickness (~3.2 kg/m² for 2mm DFT).Spray Machine: ~2.2 kg/m² per mm of thickness (~4.4 kg/m² for 2mm DFT).Actual consumption will be higher on rough or uneven surfaces.Q4: How long before I can tile over it?A: Wait at least 5 days for the membrane to cure before tiling. In ideal conditions (good weather, warm temperature, dry substrate), this can be reduced to 24 hours.Q5: What primers or compatible products are required?A: The substrate must be prepared correctly, but Mapelastic Smart itself does not require a separate primer. However, it is part of a system:Q6: What is the shelf life?A:Component A (Powder): 12 monthsComponent B (Liquid): 24 monthsStore in a dry place above +5°C in their original, sealed packaging.Q7: What are the limitations?A:Do not apply if temperature is below +8°C.Do not add water, cement, or other materials to the mix.Protect from rain and water spillage for the first 24 hours after application.Not for use in submerged areas of swimming pools.Not for use on insufficiently cured or lightweight substrates.Q8.what is the Mapei Mapelastic Smart Price? can you please visit CIVILIZEMART You definitely satisfy that price

 91 000 74051 Mapei Mapeplast Super  An integral waterproofing and plasticizing chemical admixture for concrete and mortar. It is a brown liquid that disperses cement particles, reducing the water content required in a mix and making the concrete denser and more impermeable.
Primary Function: To act as a waterproofing agent from within the concrete (integral) and as a plasticizer to improve workability. It also has a slight retarding effect, slowing down the setting time, which is beneficial in hot weather and for large pours.
Key Features & Benefits (from TDS):Integral Waterproofing: Reduces the permeability of concrete, making it water-resistant throughout its mass.Plasticizing Effect: Improves workability and ease of placement for a given water content.Water Reduction: Allows for a reduction in the water/cement ratio, leading to higher strength and durability.Set Retardation: Slows down the hydration process, reducing the risk of cold joints in large pours and mitigating thermal cracking in mass concrete.Chloride-Free: Will not corrode steel reinforcement.Compatible: Can be used with other admixtures like air-entraining agents and micro-silica.
Q1: What is the recommended dosage?A: The standard dosage for integral waterproofing is 0.4% by weight of cement. This equals 0.2 kg of Mapeplast Super for every 50 kg bag of cement. Dosages can be varied between 0.2% and 0.5% depending on the required effect (workability, retardation).Q2: How and when should it be added to the concrete mix?A: For maximum effectiveness:Add it to the mixing water.Introduce it into the mixer after the other ingredients (cement, aggregates, and at least half of the mixing water) are already in.Avoid adding it directly to dry materials.Q3: Does it affect the concrete's setting time?A: Yes. It has a slight retarding action, meaning it will slow down the initial setting of the concrete. This is beneficial for large pours and in hot weather but must be planned for.Q4: Can it be used with other admixtures?A: Yes. It is compatible with:Air-entraining agents (e.g., Mapeair)Micro-silica (e.g., Mapeplast SF)Curing compounds (e.g., Mapecure)Form release agentsFly ashQ5: What is the shelf life?A: 12 months from the date of manufacture when stored in its original, closed container in a cool place, protected from rain, frost, and direct sunlight.Q6: Is it safe to handle?A: It is not classified as dangerous. However, as a professional chemical product, it is recommended to wear gloves and eye protection. Always refer to the latest Safety Data Sheet (SDS) for complete information.Q7: What is the water/cement (w/c) ratio recommendation?A: For waterproofing, aim for a w/c ratio not higher than 0.55. The exact amount of water needed will depend on the aggregates used. Start with a w/c ratio of 0.5 and adjust based on site trials.

 91 000 74051 MAPEI Mapefill GP IN is a high-strength, non-shrink, cement-based powdered grout with graded aggregates and special additives (including expansive agent). When mixed with water, it becomes a very fluid grout that fills voids, honeycombs, base-plates, precast joints etc., with excellent adhesion, high impermeability, and minimal shrinkage, even after setting. Desirable for structural repair, anchoring, and concrete restoration work.Non-shrink, both in plastic and hardened phases – includes expansive agent to compensate shrinkage. 
Key Features & Benefits-:Very flowable / fluid consistency to fill intricate spaces without segregation. Excellent adhesion to concrete & steel (rebars), helps in durable anchoring. Impermeable to water; good resistance to dynamic mechanical stress. Thermal expansion coefficient and modulus similar to high-quality concrete, which reduces risk of cracking due to differential behaviour. Non-corrosive, chloride-free; no metallic aggregates.
Areas / Use Cases
Grouting voids and honeycombs in concrete structures. Filling gaps in precast elements, anchorages. Grouting base plates and bridge bearings. Anchoring steel bars, equipment. Underpinning, pressure grouting, structural concrete repair.
Q1. How long until Mapefill GP IN reaches usable strength?You get > 20 MPa at 1 day, > 50 MPa by 7 days. Full strength around 28 days when used per instructions. Q2. Can it be used in very narrow/honeycomb voids?Yes — its fluid mix allows it to fill intricate gaps/honeycombs without segregation. Good for precast joints etc. Q3. Does it shrink after curing?No — thanks to expansive agents, the plastic and hardened shrinkage is neutralized. Minimal to no shrinkage. Q4. Is it safe to use with steel reinforcement?Yes, it’s chloride-free and non-corrosive. Might even help bond to rebars. Q5. What about price?Price depends on region, vendor, quantity. Approximate cost for a 25 kg bag in India might be around 0000 (estimate). For exact please contact authorized Mapei Distributor (CIVILIZEMART)

 91 000 74051 Mapei Mapelastic Smart A two-component, highly flexible, cementitious waterproofing mortar. It is a brushable/rollable coating that cures to form a seamless, crack-bridging membrane.
Primary Function: To provide a durable, flexible, and vapour-permeable waterproofing layer for concrete and masonry, capable of bridging both static and dynamic cracks.
Key Features & Benefits :High Flexibility & Crack Bridging: Can bridge cracks over 2.5 mm wide and dynamic movements of 0.2-0.5mm Excellent Elongation: 120% elongation at break.Vapour Permeable (Class I): Allows moisture from inside the structure to escape, preventing blistering.Versatile Application: Can be applied by trowel, roller, or spray machine.Low VOC: Certified ECI Plus for very low emissions.UV Resistant: Can be left exposed or painted.
Q1: What is the mixing ratio and method?A: The ratio is fixed: 2 parts Component A (powder) : 1 part Component B (liquid) by weight. Always add the powder to the liquid and mix mechanically at low speed for ~1.5 minutes to achieve a lump-free, homogeneous consistency. Do not mix by hand.Q2: How is it applied and what is the required thickness?A: It must be applied in at least two coats to achieve a final thickness of 2 mm.Reinforcement: For critical areas (terraces, pools), embed an alkali-resistant glass fibre mesh (e.g., Mapenet ISO) in the first wet coat. For superior crack bridging on horizontal surfaces, use a polypropylene fabric (Mapetex Sel N).Recoat Time: Apply the second coat after 4-5 hours, once the first coat has hardened.Q3: What is the coverage area?A: Consumption depends on the application method:Trowel/Roller: ~1.6 kg/m² per mm of thickness (~3.2 kg/m² for 2mm DFT).Spray Machine: ~2.2 kg/m² per mm of thickness (~4.4 kg/m² for 2mm DFT).Actual consumption will be higher on rough or uneven surfaces.Q4: How long before I can tile over it?A: Wait at least 5 days for the membrane to cure before tiling. In ideal conditions (good weather, warm temperature, dry substrate), this can be reduced to 24 hours.Q5: What primers or compatible products are required?A: The substrate must be prepared correctly, but Mapelastic Smart itself does not require a separate primer. However, it is part of a system:Q6: What is the shelf life?A:Component A (Powder): 12 monthsComponent B (Liquid): 24 monthsStore in a dry place above +5°C in their original, sealed packaging.Q7: What are the limitations?A:Do not apply if temperature is below +8°C.Do not add water, cement, or other materials to the mix.Protect from rain and water spillage for the first 24 hours after application.Not for use in submerged areas of swimming pools.Not for use on insufficiently cured or lightweight substrates.Q8.what is the Mapei Mapelastic Smart Price? can you please visit CIVILIZEMART You definitely satisfy that price

91 000 74051 Mapefloor I 900 is a two-component, high solid content epoxy resin according to a formula developed in MAPEI’s Research & Development laboratories. It is used as binder for mortars for patching of concrete surfaces or for epoxy mortar screed systems for floors.

 91 000 74051 MAPEI Mapefill GP IN is a high-strength, non-shrink, cement-based powdered grout with graded aggregates and special additives (including expansive agent). When mixed with water, it becomes a very fluid grout that fills voids, honeycombs, base-plates, precast joints etc., with excellent adhesion, high impermeability, and minimal shrinkage, even after setting. Desirable for structural repair, anchoring, and concrete restoration work.Non-shrink, both in plastic and hardened phases – includes expansive agent to compensate shrinkage. 
Key Features & Benefits-:Very flowable / fluid consistency to fill intricate spaces without segregation. Excellent adhesion to concrete & steel (rebars), helps in durable anchoring. Impermeable to water; good resistance to dynamic mechanical stress. Thermal expansion coefficient and modulus similar to high-quality concrete, which reduces risk of cracking due to differential behaviour. Non-corrosive, chloride-free; no metallic aggregates.
Areas / Use Cases
Grouting voids and honeycombs in concrete structures. Filling gaps in precast elements, anchorages. Grouting base plates and bridge bearings. Anchoring steel bars, equipment. Underpinning, pressure grouting, structural concrete repair.
Q1. How long until Mapefill GP IN reaches usable strength?You get > 20 MPa at 1 day, > 50 MPa by 7 days. Full strength around 28 days when used per instructions. Q2. Can it be used in very narrow/honeycomb voids?Yes — its fluid mix allows it to fill intricate gaps/honeycombs without segregation. Good for precast joints etc. Q3. Does it shrink after curing?No — thanks to expansive agents, the plastic and hardened shrinkage is neutralized. Minimal to no shrinkage. Q4. Is it safe to use with steel reinforcement?Yes, it’s chloride-free and non-corrosive. Might even help bond to rebars. Q5. What about price?Price depends on region, vendor, quantity. Approximate cost for a 25 kg bag in India might be around 0000 (estimate). For exact please contact authorized Mapei Distributor (CIVILIZEMART)