Civilize Mart

Ensures economical durable & optimal waterproofing & protection for exposed roofs, pitched roofs, balconies, terraces,sunshades, etc.• Thixotropic cold applied component• Elastic material hence provides good crack bridging.• Highly economical due to supply in a ready to use form and no wastage of material• Good UV resistance.Areas of Application• Suitable for waterproofing of new surfaces as well as for the repairs of old untreated surfaces• Suitable for well sloped horizontal as well as vertical surfaces like flashings, roof slabs, terraces, balconies, sunshades,parapet walls, roof edgings, gulley’s, steeply pitched roof designs, etc.• Provides additional waterproofing and protection when used as base and/or intermediate coat in brickbat coba, and / or IPSfloorings.• Is optimally suitable for application on structures having complicated geometry like domes, arches, shells, folded plates,paraboloids, corrugated sheets etc

■ Particularly low-viscosity polyurethane-based elastomer resin■ Very good injectability■ High penetration activity due to low surface tension■ Water-displacing, no foam formation■ Variable control of reaction times■ Complete curing under dynamic loading■ High elasticity■ Corresponds to fire class B2 according to DIN 4102 in the injection medium■ Durable water impermeability■ CE conformity according to EN 1504-5: CE U(D2) W(1) (1/2/3/4) (5/40)■ General building authority approval issued by the DIBt for substances resistant to chemical attack inLAU facilities (facilities for the storage, filling and handling of liquid substances hazardous to water)■ General building authority approval issued by the DIBt for injection into soil and groundwater■ REACH exposure: water contact permanent, inhalation periodic, processing and application■ Environmental Product Declaration EPD

MC-Crackfill is a premixed, polymer containing fine repair mortar for external cracks. It is ideal for filling of cracks, holes, gaps and cavities present in brick masonry, concrete and plastered surfaces. MC-Crackfill is non-shrink in nature. 

MC-DUR 215 UVR is a two component, PU Resin Elastomer Coating. The cured film is nontoxic and provides good chemical resistance, hence it is suitable for coating on the mineral based surface to provide it a dust free surface.

 91 000 74051 MC-DUR 215 UVR - UV Resistant Polyurethane Coating (Two-Component) is a high-performance, two-component polyurethane coating that provides a durable, dust-free, and UV-resistant finish for concrete and steel surfaces. It protects against weathering, corrosion, and chemical spills, making it ideal for balconies, laboratories, industrial floors, and outdoor structures. Its special formulation reduces yellowing from sun exposure. 
Key Benefits:
UV Resistant: Specially formulated to resist yellowing and degradation from sunlight.Durable & Chemical Resistant: Withstands chemicals, oils, dilute acids, and alkalis.Dust-Proof & Seamless: Creates a smooth, easy-to-clean, and maintenance-free surface.Good Adhesion: Bonds strongly to concrete, steel, and masonry.Available in Colors: Can be supplied in various shades as required.Approximate Market Price: 3599 - 4400 per kg (Please contact CIVILIZEMART for package pricing!)
Questions and Answers:Q1: What is MC-DUR 215 UVR used for?A: It is used as a protective topcoat for concrete and steel surfaces in both indoor and outdoor applications. Common uses include balconies, laboratory floors, office spaces, shop floors, and steel structures that require a durable, chemical-resistant, and UV-stable finish.Q2: How many components does it have?A: It is a three-component system (Base, Pigment, and Hardener) that must be mixed together in a specific ratio before application.Q3: How is it applied?A: It can be applied by brush, roller, or airless spray. It must be applied over a recommended primer. Two coats are recommended, with the second coat applied perpendicular to the first after it has dried.Q4: What is the coverage area?A: The coverage is approximately 150 grams per square meter per coat to achieve a Dry Film Thickness (DFT) of 85 microns.Q5: What is the approximate price?A: The price is typically calculated per kg. The approximate cost is 3599 to 4400 per PACK. Contact us CIVILIZEMART for the exact price of the 4kg and 20kg packs.Q6: What is its key advantage for outdoor use?A: Its main advantage is excellent UV resistance, which significantly reduces yellowing and degradation compared to standard polyurethane coatings, making it perfect for sun-exposed areas.Q7: What is the pot life after mixing?A: Once mixed, the product must be used within 30-40 minutes at 25°C, as it will start to harden after this period.Q8: How long does it take to cure fully?A: It is initially hard after 16 hours at 30°C but reaches full cure and maximum chemical resistance after 7 days.Q9: What precautions are necessary during application?A:Wear gloves and safety glasses. The hardener is a skin irritant.Do not apply if the surface temperature is above 35°C or below 10°C.Surface must be clean, sound, and properly primed.Use only the recommended thinner (MC-Thinner EP) for cleaning tools.

MC-DUR 1264 is a two-component epoxy injection resin for structural repairs of cracks. Application can be carried out through various application methods ranging from simple brush treatment to sophisticated one or two component pressure injection machines

Two component polymer modified hydraulically setting slurry, solvent free
Crack bridging characteristics
Resistant to carbonation
Withstands chloride ion diffusion while retaining breathing capacity
es
No curing required
Can be applied by brush or spatulas
Elastic and flexible membrane with high mechanical resistance
Excellent adhesion to old and new surfaces
Areas of Application
• Sealing of strained basement walls
Sealing and protection of bridge decks, splash zones, tunnels, cooling towers, balconies etc.
Waterproofing systems for any over or underwater applications (with suitable protective layer)
As a carbonation resistant coating in repair and protection systems
Excellent coating for areas showing many changes in geometry
erproof
Application Notes General
Zentrifix-elastic is a two component mineral based polymer modified waterproofing and concrete protection system for specialized structures like dams, bridges, culverts, tunnels and all hydraulic structures where the water pressures are high. It is fully suitable for normal waterproofing requirement of terraces, parking structures, basements, swimming pools, sanitary areas etc. When two components are mixed and applied, the film formed is a thick elastic membrane with good abrasion and chemical resistance. It is most suitable for protection from chloride attacks.
Advantages
Zentrifix-elastic when hardened produces a seamless elastic film, which is having excellent water resistance. The component Zentrifix-elastic is a cement bound mineral modified mortar of proper grading. The second component Emceflex 15 is an acrylic polymer based emulsion. The crack-bridging ability is about 0.7 mm in normal application thickness. Additional coats increase the crack bridging characteristics.
Instructions for useSurface PreparationThe surface to be coated must comply with the principles of
contaminations.
All loose materials, dirt, grease, oil, dust, mould release agents, etc. should be removed from the substrate to be treated. The substrate should have sufficient bonding strength, for example in

Coated surfaces are hydrophobic, impermeable to water, dampness, reduce the risk of efflorescence, moss and fungus growth• Protects the cementitious surfaces against freeze thaw cycles while still retaining properties of the substrate• Due to flexible and elastic properties of the system, the risk of cracks formation is minimized• System does not contain any solvents, due to which it is non-toxicFlexible waterproofing system• The coating can easily be provided on vertical as well as horizontal surfaces• Provides excellent adhesion to substrates, and is resistant to alkalis and UV- rays• System, after curing provides a flexible and elastic, cracks bridging (at least 0.

 Low- viscosity Polymer reactive injection resin* Good Injectability* Variable reactivity* Water displacing* Limited foaming when directly mixed with water (rigid foam)* Waterproof*High Compressive-and tensile strength*Complying with building material class B2 for fire behaviour acc. to DIN 4102 in the injection medium*REACH-assessed exposure scenario: long term water-contact, periodical inhalation, application

Low-viscous, foaming injection resin based on polyurethane Unlimited processing time without contact with water Fast reaction on contact with water High volume increase within a few seconds Stops strong & pressurised water ingress Phthalate plasticizer-free REACH exposure: water contact permanent, inhalation periodic, processing and application Environmental Product Declaration EPDAreas of Application Stopping strongly flowing water in structures or building pits Filling of cavities and voids in structures Temporary sealing of heavily water-bearing cracks before permanent sealing injection with MC elastomer resins MC-Injekt 2300 top or MC-Injekt 2700 L IN

Emcekrete Guarantees A Permanent, Reliable Connection And Bond Between Machine Bases And The Foundation Of Structure.
•good Pourability And Flowability Inspite Of Very Small Amount Of Water Added 
•high Initial & Final Strengths
• Because Of Low Air Entrainment Emcekrete Forms Very Dense Grout.ready To Use, Free Flow, High Strength, Non-shrink Grout
• Excellent Bonding Strength Which Prevents Detachment From Substrates.
• Emcekrete Does Not Shrink
• High Dimensional Stability
• The Change Of Volume And Shape After The Loading Is Negligible
• Emcekrete Is Free From Harmful Chlorides And Other Aggressive Constituents. Adjacent Steel Areas Are Permanently Protected Against Corrosion

Ready to use, highly flexible, UV resistant liquid appliedwaterproofing membrane & protection coating for nontrafficked roofs and building facades.

Dichtament® DS2 is a one component liquid applied membrane forming waterproofing system for concrete, brick, masonry or cement-bound surfaces. Dichtament® DS2 is a hydraulically setting pulverised material modified with a polymer component, which produces outstanding waterproof surfaces. Dichtament® DS2 waterproofing system works on the principle of waterproofing by crystallization and forms an integral part of cement substrates. The crystalline penetration takes place by osmosis and the treatment penetrates concrete even against hydrostatic pressure.

One Component Membrane Forming Waterproofing by CrystallizationProduct Properties • Imparts impermeability to water and dampness to coated surfaces • Gives surfaces that are efflorescence-free, moss-resistant and resistant to fungus growth • Maintains the breathing properties of concrete • Due to excellent adhesion and thixotropic properties, vertical and inclined surfaces can be easily coated One Component Membrane Forming Waterproofing by Crystallization p pp , y • Possesses high flexural and tensile strengths and provides for thermal movements • Is free of chlorides, water-soluble halogens and corrosive substances • Is resistant to alkalis and UV-rays. It is also non-toxic and non-combustible • System protects cementitious substrates against freeze-thaw cycles Areas of Application • Outstanding waterproof and damp proof coat for concrete structures, brick and masonry works, cement renders, plasters etc. • U de g ou d s a ts a d ga ages, eta g a s, tu e s, ate ta s, oo s abs, se e s a d base e ts etc nderground shafts and garages, retaining walls, tunnels, water tanks, roof slabs, sewers and basements etc. • Resurfacing of bathrooms, cellar walls and floors exposed to dampness and attacks from moss and fungus • Foundation walls and footings subjected to ground moisture, water and salt efflorescence can be well protected with coating of Dichtament DS2 Application Notes General Dichtament DS2 is a one component liquid applied membrane is recommended, when Dichtament DS2 is directly subjected to water pressure. In case of sandwiched system the thickness of Dichtament DS2 is a one component liquid applied membrane Dichtament DS2 can be between 1 to 2 mm depending upon forming waterproofing system for concrete, brick, masonry or cement-bound surfaces. The product can also be supplied as a two-component product Dichtament DS and Nafufill BB2. The base component of Dichtament DS2 is a hydraulically setting pulverised material modified with a polymer component, which produces outstanding waterproof surfaces. DichtamentDS2 waterproofing system works on the principle of waterproofing by crystallization and forms an integral part of cement substrates. The crystalline penetration takes place by osmosis and the Dichtament DS2 can be between 1 to 2 mm depending upon actual site conditions. However, the maximum thickness should not exceed 6 mm. Subsequent coats may be applied when the previous coat is not completely dried out, subject to minimum of 1 hour. Care should be taken to protect the coating from being damaged during subsequent operations. Curing and Protection The crystalline penetration takes place by osmosis and the The coating of Dichtament DS2 must be cured by clean water to treatment penetrates concrete even against hydrostatic pressure. Surface Preparation Damp and loose plaster, if any must be removed. All joints must be sound and properly filled. In case of any cracks they should be sealed. Please refer to our technical literature on Crack Injections. The surface to be treated must be structurally sound. It t b l f f ll l ti l il The coating of Dichtament DS2 must be cured by clean water to avoid rapid hardening. Protect from direct sunlight and extreme temperatures. Protective or decorative systems like tiles, wood panels etc. may only be applied when Dichtament DS2 has sufficiently hardened, at least after 7 days. Coverage The consumption (coverage) largely depends upon the It must be clean, free of all loose particles, oil, grease, li ti th d diti it t t t d l efflorescence, traces of form oil curing compounds and any other previous treatments or contamination. Mixing and Application Mixing ratio for Dichtament DS2 is 100 p.b.w. Powder to 26-30 p.b.w. water, i.e. 6 to 6.5 kg water is needed (as per consistency) per 30kg sack of Dichtament DS2. 

Hydraulically setting, premixed, ready to use, polymer modified grout for injections • Creates an integral waterproofing barrier and prevents water penetration and rising dampness • The injection grout is waterproof and non-shrink, thereby the cracks, crevices, and cavities are optimally filled and waterproof • On account of its plasticizing characteristics it ensures good flow, even while gravity grouting • Due to high dispersion Centricrete does not settle and remains in suspension even if pumped under pressure • The grout develops higher compressive and flexural strengths compared to normal cement grouts • Alkaline therefore, it prevents the carbonation in concrete and thus effectively protects the reinforcement against corrosion • Improves imperviousness and resistance to aggressive industrial influences  

Dichtament DS-flex is a flexible, hydraulically setting, two component waterproofing system for concrete, brickwork,masonry and all cement bound surfaces. Dichtament DS-flex consists of a powder base component and a polymer component Emceflex 30 in liquid form. Dichtament DS-flex system provides excellent waterproofing even under high water pressure (upto 7 bars) Dichtament DS-flex possess high flexural and tensile strengths and thus elastic in nature. Dichtament DS-flex system is free from chlorides and any other corrosive substances. The system has enhanced carbonation protection.

Low-viscous, foaming injection resin based on polyurethane  Unlimited application time  Fast reaction when in contact with water  High volume increase within a few seconds  Stops pressurised water  Phthalate free  REACh-assessed exposure scenarios: long-term water contact (crack), periodical inhalation, application Areas of Application  Stopping strongly flowing water in components or construction pits  Sealing buildings made of concrete or masonry  Temporary sealing of water-bearing cracks before the permanent sealing injection with MC-Injekt 2300 top