Civilize Mart

 91 000 74051 AquaArm TG by MYK Arment is a two-component, cementitious, polymer-dispersion-based waterproof coating designed to provide a flexible, breathable, and abrasion-resistant protective barrier for concrete and masonry. Its solvent-free liquid component ensures safe and sustainable application.Key Features:
Highly flexible & breathable—ideal for surfaces like balconies, terraces, chajjas, and bathrooms
Self-curing—no external curing required under normal conditions
Strong adhesion to damp surfaces, forming a long-lasting waterproof barrier
Application Instructions:
Surface Prep: Substrate must be sound, clean, and pre-wetted to saturation (SSD condition). Smooth areas should be roughened for better bonding; all cracks or defects repaired beforehand
Mixing Ratio: Blend Pre-weighed powder (Component A) and Polymer liquid (Component B) in a 7.5 : 2.5 weight ratio using a slow-drill mixer at ~350–400 rpm for 3–4 minutes, ensuring a lump-free, homogeneous slurry
Application: Apply in two coats—first horizontally, then vertically after 4–6 hours at ~30 °C. Typical consumption: 1.5–2.5 kg/m² per coat, depending on requirements
Curing Timeline: Surface becomes rain-resistant after ~4 hours on vertical surfaces and ~12 hours on horizontal ones (at 30 °C); foot traffic may resume after ~2 days

Q1. What is AquaArm TG used for?It’s a two-part waterproof coating designed for flexible, breathable protection on balconies, terraces, bathrooms, roofs, and chajjas.
Q2. Is it easy to apply?Yes—mix and apply by brush in two coats. Easy to handle and ideal for complex surfaces.
Q3. Can it be applied on damp concrete?Absolutely. It bonds excellently with pre-wetted surfaces and cures without issues.
Q4. How fast does it cure and become rain-resistant?At around 30 °C, vertical surfaces are rainproof in ~4 hours, and horizontal surfaces in ~12 hours—usable for foot traffic after ~2 days.
Q5. What is the recommended consumption rate?Typically 1.5–2.5 kg/m² per coat, varying with surface texture and condition.
Q6. What packaging sizes are available?Available in composite packs (A+B) of 40 kg.
Q7. Is it durable and long-lasting?Yes: the coating is flexible, abrasion-resistant, breathable, and forms a durable waterproof barrier.
Q8. Is it non-toxic and eco-friendly?Yes—solvent-free, with non-toxic components safe for regular handling.
Q9. What is the shelf life and storage guideline?Store in a cool, dry place. Shelf life typically lasts 6 to 12 months in sealed condition.

Q10. What is the price?Average wholesale price is approximately ₹88 per kg based on 40 kg packaging (subject to variation by region and supplier)For the latest pricing, contact CivilizeMart.

 91 000 74051 AquaArm TG by MYK Arment is a two-component, cementitious, polymer-dispersion-based waterproof coating designed to provide a flexible, breathable, and abrasion-resistant protective barrier for concrete and masonry. Its solvent-free liquid component ensures safe and sustainable application.Key Features:
Highly flexible & breathable—ideal for surfaces like balconies, terraces, chajjas, and bathrooms
Self-curing—no external curing required under normal conditions
Strong adhesion to damp surfaces, forming a long-lasting waterproof barrier
Application Instructions:
Surface Prep: Substrate must be sound, clean, and pre-wetted to saturation (SSD condition). Smooth areas should be roughened for better bonding; all cracks or defects repaired beforehand
Mixing Ratio: Blend Pre-weighed powder (Component A) and Polymer liquid (Component B) in a 7.5 : 2.5 weight ratio using a slow-drill mixer at ~350–400 rpm for 3–4 minutes, ensuring a lump-free, homogeneous slurry
Application: Apply in two coats—first horizontally, then vertically after 4–6 hours at ~30 °C. Typical consumption: 1.5–2.5 kg/m² per coat, depending on requirements
Curing Timeline: Surface becomes rain-resistant after ~4 hours on vertical surfaces and ~12 hours on horizontal ones (at 30 °C); foot traffic may resume after ~2 days

Q1. What is AquaArm TG used for?It’s a two-part waterproof coating designed for flexible, breathable protection on balconies, terraces, bathrooms, roofs, and chajjas.
Q2. Is it easy to apply?Yes—mix and apply by brush in two coats. Easy to handle and ideal for complex surfaces.
Q3. Can it be applied on damp concrete?Absolutely. It bonds excellently with pre-wetted surfaces and cures without issues.
Q4. How fast does it cure and become rain-resistant?At around 30 °C, vertical surfaces are rainproof in ~4 hours, and horizontal surfaces in ~12 hours—usable for foot traffic after ~2 days.
Q5. What is the recommended consumption rate?Typically 1.5–2.5 kg/m² per coat, varying with surface texture and condition.
Q6. What packaging sizes are available?Available in composite packs (A+B) of 40 kg.
Q7. Is it durable and long-lasting?Yes: the coating is flexible, abrasion-resistant, breathable, and forms a durable waterproof barrier.
Q8. Is it non-toxic and eco-friendly?Yes—solvent-free, with non-toxic components safe for regular handling.
Q9. What is the shelf life and storage guideline?Store in a cool, dry place. Shelf life typically lasts 6 to 12 months in sealed condition.

Q10. What is the price?Average wholesale price is approximately ₹88 per kg based on 40 kg packaging (subject to variation by region and supplier)For the latest pricing, contact CivilizeMart.

 91 000 74051 AquaArm 2C-P is a two component cementitious coating system for waterproofing of wet areas and any water retaining structures such as swimming pools and water features.
It conforms to Class II requirement as per AS/NZS 4858

 91 000 74051 MYK Arment ArmGrout Inject EP (Base + Hardener) is a low-viscosity, two-part epoxy resin grouting system specifically engineered for repairing hairline cracks, voids, and structural gaps in concrete. Designed to restore structural integrity, it ensures strong bonding, fast curing, and durability.Ideal for cracks and gaps from 0.3 mm to 10 mm 
Moisture-insensitive with low creep characteristics, making it suitable for both damp and dry conditions
Delivers high compressive, tensile, and flexural strength—e.g., ~65 N/mm² at 7 days under standard conditions 
Chemical-resistant: withstands oils, greases, mild acids/alkalis, seawater, and industrial chemicals 
Easy, fast pumping and penetration into fine cracks make it efficient for rehabilitation work
Packaging available in 2 kg (base + hardener) and 4.5 kg composite packs

Q1. What is MYK Arment ArmGrout Inject EP used for?It’s a two-part epoxy resin system used for injecting and sealing hairline cracks, voids, and honeycombs in concrete slabs, beams, columns, etc.
Q2. How does it compare to traditional cement grout?This epoxy grout penetrates finer cracks and provides superior bonding strength, chemical resistance, and low shrinkage—unlike cement grouts.
Q3. What crack width can it handle?It works effectively in cracks and gaps ranging from 0.3 mm to 10 mm.
Q4. Is it affected by moisture?No, it’s moisture-insensitive—suitable for slightly damp environments without affecting performance.
Q5. What is its strength performance?Expect around 65 N/mm² compressive strength at 7 days, along with high tensile and flexural strength.Q6. How should it be mixed and applied?Mix base and hardener thoroughly (typically with slow-speed mixing for ~60 seconds) and inject using a pressure pump before pot life ends.
Q7. What pack sizes are available?This product is offered in 2 kg pack and 4.5 kg composite pack (base + hardener).
Q8. How resistant is it to chemicals?It shows excellent resistance to oils, greases, mild acids/alkalis, freshwater, sea water, and other industrial chemicals.
Q9. How long does it take to cure?Standard curing is 24 hours before removing ports; full strength develops in 7 days.
Q10. What’s its shelf life and storage condition?Shelf life is 12 months in sealed condition, stored in a cool and dry place.

Q11. What is the price of MYKArment ArmGrout Inject EP?Prices vary based on pack size (2 kg / 4.5 kg), order quantity, and location. For the best wholesale and retail price, please contact CivilizeMart directly.

 91 000 74051 ReArm Coat CT-S is a solvent-based epoxy coal-tar coating delivered as a three-component, pre-weighed kit for on-site mixing. Designed for corrosion-prone conditions, it offers excellent chemical resistance and mechanical abrasion protection, ideal for safeguarding steel and concrete in harsh environments.
Key Features & BenefitsDelivers long-lasting chemical and abrasion resistance for both steel and concrete structuresIdeal for corrosive environments, including chemical plants, STPs, saline water tanks, submerged structures, piers, jetty works, and retaining wallsApplied in just two coats, with no primer required, making it a cost-effective systemVersatile application: Use brush, roller, or spray for seamless coating
Q1. What is ReArm Coat CT-S used for?It protects steel and concrete structures against corrosion, chemical attacks, and abrasion in challenging environments.Q2. How do I apply it?Thoroughly surface-prepare (mechanically clean/sand blast).Mix base (diluted with thinner) and hardener using a slow-speed drill.Apply two coats using brush, roller, or spray; apply second coat when first is tack-free.Q3. Any temperature-based precautions?Yes—avoid application on surfaces above 35 °C. Store materials in cool conditions; apply during cooler parts of the day.Q4. What makes it cost-effective?No primer needed; excellent service life and protection offer long-term savings.Q5. Is it suitable for submerged applications?Absolutely—excellent chemical resistance makes it ideal for submerged structures like piers and saline tanks.Q6. What is the price?Contact CivilizeMart for the latest pricing and bulk order rates tailored to your project needs.

 91 000 74051 ArmGrout Additive is a specially formulated grouting aid. It plasticize the mix allowing for substantial reduction in watercontent without affecting the fluidity, thus improving the strength and impermeability of the grout. During the setting periodof the grout it produces controlled expansion to compensate the normal plastic shrinkage of cement.General:A single pack powder grout additive which when added to cement produces a free flow non-shrink grout

 91 000 74051 ArmGrout M-65 is recommended for precision grouting where it is essential to with stand static load in typical applications like base plate of Generators, compressors, boilers etc. It is basically a free flow no shrink, high strength expansive grout. It is based on port land cement with graded aggregates and additives which impart controlled expansion in the plastic state. The non-shrink grout function is three folds, to fill the voids between the base plate and the concrete foundations completely and permanently without shrinkage or separating from either to transfer all loads from the base plate to the concrete foundation and to maintain precise alignment. It effectively transfers all operational loads to the foundation

 91 000 74051 Product Name: ReArm Rust C (Formerly MYK Rust Convertor)What it is: A single-component, ready-to-use chemical solution designed to treat and convert stubborn rust on iron and steel surfaces into a stable, protective layer. It transforms rust (iron oxide) into an organo-complex compound, sealing the surface and preventing further corrosion.Primary Function: To provide a simple, effective solution for rust treatment without the need for expensive sandblasting or extensive surface preparation. It creates a moisture-repelling, abrasion-resistant coating that serves as an ideal base for topcoats of paint.
Key Features & Benefits (from TDS):Converts Rust: Chemically changes rust into a stable, protective black layer.Excellent Adhesion: Provides a strong bond for subsequent paint layers.Moisture Repellent: Forms a non-porous barrier that prevents moisture from reactivating the corrosion process.Abrasion Resistant: The converted layer has good mechanical stability.Cost-Effective: Eliminates the need for sandblasting in many cases.Easy Application: Simply brush or roll on after basic surface prep.
Q1: Do I need to sandblast the surface before applying ReArm Rust C?A: No. A key benefit of this product is that it eliminates the need for sandblasting. However, all loose and flaking rust must be removed using a stiff wire brush. The surface should be cleaned and degreased for the product to work effectively.Q2: How do I apply it?A:Prepare Surface: Remove loose rust with a wire brush. Clean and degrease the surface.Apply Product: Apply ReArm Rust C generously using a brush or roller.Drying/Curing: It dries to touch in 20 minutes but requires 24 hours to fully cure and complete the rust conversion process.Second Coat: For best results, a second coat is recommended.Topcoat: If applying an oil-based paint, wait 48 hours after the last coat of ReArm Rust C.Q3: What does it do to the rust?A: It does not remove the rust. Instead, it chemically converts the rust (iron oxide) into a stable, black, organo-complex compound that is moisture-repelling and acts as a protective layer.Q4: Can I paint over it?A: Yes. In fact, it is designed to be an ideal base for paint. Once fully cured (after 24-48 hours), you can apply most standard topcoats for additional protection and aesthetics.Q5: What is the shelf life?A: The product has a shelf life of 36 months (3 years) from the date of manufacture when stored in its original, sealed container in a cool, dry, shaded place.Q6: Is it safe to use?A: Caution Required. The product is corrosive and has a low pH (2 - 3.5). You must wear appropriate Personal Protective Equipment (PPE) including a face mask and rubber gloves. Avoid contact with skin and eyes. In case of contact, flush immediately with plenty of water and seek medical attention if necessary.Q7: What is the coverage area?A: The datasheet does not specify a coverage rate as it depends entirely on the rust profile and surface porosity. Heavily rusted, porous surfaces will require more product than lightly rusted, smooth surfaces.

 91 000 74051 ReArm SBR 35 is a modified Styrene butadiene Rubber emulsion specially designed for use as a mortar modifier forcementitious systems and a bonding aid. It is suitable as an admixture for obtaining waterproof concrete, plasters and mortarsit is also suitable for preparation of repair mortars damaged and spalled concrete.

 91 000 74051 ArmGrout M-65 is recommended for precision grouting where it is essential to with stand static load in typical applications like base plate of Generators, compressors, boilers etc. It is basically a free flow no shrink, high strength expansive grout. It is based on port land cement with graded aggregates and additives which impart controlled expansion in the plastic state. The non-shrink grout function is three folds, to fill the voids between the base plate and the concrete foundations completely and permanently without shrinkage or separating from either to transfer all loads from the base plate to the concrete foundation and to maintain precise alignment. It effectively transfers all operational loads to the foundation

 91 000 74051 MYK ReArm Fix 10S - Instant Leak Stopping Cement (Fast Setting) is a chloride-free, rapid-setting cement that hardens instantly upon contact with water. It is specifically designed for emergency leak sealing in pipes, manholes, tunnels, and concrete structures. It can be used in its dry form or as a paste to plug active leaks quickly and effectively.
Key Benefits:
Instantly Stops Leaks: Sets immediately to plug running water leaks.Easy to Use: Can be applied directly as a dry powder or mixed into a paste.Chloride-Free: Safe for reinforced concrete, prevents corrosion.Versatile: Ideal for pipes, basements, manholes, and water tanks.Portable Packaging: Available in convenient 1kg and 12kg packs.
Approximate Market Price:12 kg Bag: 550 TO 790(Contact CIVILIZEMART for exact pricing!)
Questions and Answers: Q1: What is the primary use of ReArm Fix 10S?A: Its main use is for emergency leak sealing. It is perfect for instantly stopping active water leaks from burst pipes, in manholes, tunnels, and concrete walls.Q2: How do you use it to stop a leak?A: For active leaks, you can press the dry powder directly into the leak point. Alternatively, mix it with a little water to form a stiff paste; as soon as the mix feels hot, press and hold it firmly against the leak for 1-2 minutes until it sets.Q3: Does it work on active, flowing water leaks?A: Yes, that is its specialty. It is designed to set and harden even in the presence of water, making it highly effective for plugging active leaks.Q4: What is the approximate price?A:The approximate price for a 12 kg bag is 550 TO 790.Please message CIVILIZEMART us for the best price.Q5: Is it safe for concrete with steel reinforcement?A: Yes, it is chloride-free, which means it will not cause corrosion to steel reinforcement bars within the concrete.Q6: How fast does it set?A: It is an instant-setting product. It begins to harden within seconds to minutes upon contact with water.Q7: What pack sizes are available?A: It is available in convenient sizes: a small 1 kg pouch for minor repairs and a larger 12 kg bag for bigger jobs.Q8: What is the shelf life?A: It has a shelf life of 12 months from the date of manufacture when stored in a cool, dry place.Q9: What safety precautions should be taken?A: Always wear protective gloves and safety glasses. The product contains cement and can cause skin and eye irritation. Wash immediately with plenty of water if contact occurs.

91 000 74051 FloArm Coat EFG is a two-component, solvent-free epoxy resin coating specially designed for hygienic environments such as food industries, water tanks, dairies, breweries, and pharmaceutical spaces. This high-build, semi-gloss epoxy film is non-toxic, odorless, chemically resistant, and safe for contact with food and potable water, with CFTRI approval.
Key Features & BenefitsFood-safe & potable grade: Approved by CFTRI, safe for consumable environmentsSeamless, semi-gloss finish: High-build coating—durable, cleanable, and hygienicExcellent chemical resistance: Stands up to oils, chemicals, and moistureSolvent-free & low odor: Makes it safe for enclosed and sensitive spaces
Q1. What makes FloArm Coat EFG safe for food environments?It’s solvent-free, odorless, and CFTRI-certified for contact with food and potable water—ensuring hygiene and safety.Q2. How durable is the coating?It forms a tough, semi-gloss, high-build film resistant to chemicals, abrasion, moisture, and microbial growth.Q3. What is the packaging and coverage?Offered as a 4 kg pre-weighed kit (Base + Hardener), sufficient for two coats at ~200 µm each.Q4. How do I apply it?Prepare surface: Clean thoroughly and remove contaminants.Mix Base and Hardener well with a low-speed mixer.Apply with roller, brush, or airless spray—two coats recommended (~180–250 µm each).Q5. What temperatures are ideal for application?Maintain substrate and material temp between 15–30 °C. Avoid very hot or cold conditions for consistent curing.Q6. What are the safety and storage guidelines?Store sealed kits in cool, dry places. Shelf life is approximately 12 months. Always use gloves during application.Q7. What’s the price estimate?please consult Civilize Mart.

 91 000 74051 ReArm SBR 45 is a modified Styrene butadiene Rubber emulsion specially designed for use as a mortar modifier forcementitious systems and a bonding aid. It is suitable as an admixture for obtaining waterproof concrete, plasters andmortars. It is also suitable for preparation of repair mortars damaged and spalled concrete.

 91 000 74051 ReArm Coat CT-S is a solvent-based epoxy coal-tar coating delivered as a three-component, pre-weighed kit for on-site mixing. Designed for corrosion-prone conditions, it offers excellent chemical resistance and mechanical abrasion protection, ideal for safeguarding steel and concrete in harsh environments.
Key Features & BenefitsDelivers long-lasting chemical and abrasion resistance for both steel and concrete structuresIdeal for corrosive environments, including chemical plants, STPs, saline water tanks, submerged structures, piers, jetty works, and retaining wallsApplied in just two coats, with no primer required, making it a cost-effective systemVersatile application: Use brush, roller, or spray for seamless coating
Q1. What is ReArm Coat CT-S used for?It protects steel and concrete structures against corrosion, chemical attacks, and abrasion in challenging environments.Q2. How do I apply it?Thoroughly surface-prepare (mechanically clean/sand blast).Mix base (diluted with thinner) and hardener using a slow-speed drill.Apply two coats using brush, roller, or spray; apply second coat when first is tack-free.Q3. Any temperature-based precautions?Yes—avoid application on surfaces above 35 °C. Store materials in cool conditions; apply during cooler parts of the day.Q4. What makes it cost-effective?No primer needed; excellent service life and protection offer long-term savings.Q5. Is it suitable for submerged applications?Absolutely—excellent chemical resistance makes it ideal for submerged structures like piers and saline tanks.Q6. What is the price?Contact CivilizeMart for the latest pricing and bulk order rates tailored to your project needs.

 91 000 74051 AquaArm WPU 1K E is a single-component, liquid applied, elastomeric polyurethane coating for waterproofing of concrete surfaces. AquaArm WPU 1K E provides excellent resistance to moisture, water, and salts penetration into concrete and masonry surfaces. It conforms to ASTM C-836.

 91 00074051 MYK ReArm Crete RM - Polymer Modified Repair Mortar  is a ready-to-use, cement-based repair mortar fortified with polymers. It is designed for fixing cracks, holes, and damaged areas on concrete walls and ceilings, both indoors and outdoors. It offers easy application, high strength, and excellent adhesion, making it ideal for restoring concrete surfaces.
Key Benefits:
High Strength: Achieves high compressive strength quickly (10 N/mm² in 1 day).Easy to Use: Just mix with water; suitable for both hand and machine application.Excellent Adhesion: Bonds strongly to existing concrete surfaces.Shrinkage Compensated: Minimizes cracking after application.Versatile: For interior and exterior repair work on concrete and precast elements.Approximate Market Price: 550 - 750 per 25 kg bag (Contact CIVILIZEMART for best price!)
Questions and Answers:Q1: What is ReArm Crete RM used for?A: It is used for repairing cracks, spalls, and damaged areas on concrete walls, ceilings, and precast elements. It is suitable for both indoor and outdoor use.Q2: How is it mixed and applied?A: Simply add the powder to clean water and mix to a smooth, paste-like consistency. It can be applied by trowel or smoothing tool. The maximum recommended layer thickness is 20mm.Q3: What is the coverage area?A: Coverage depends on the repair depth. As a guide, a 25kg bag will cover approximately 0.5 to 1 square meter at a 20mm thickness.Q4: What is the approximate price?A: The approximate price for a 25kg bag is 550 TO 750. Please contact CIVILIZEMART us for the exact price and bulk order discounts.Q5: How strong is this repair mortar?A: It is very strong, achieving over 10 MPa (N/mm²) in 1 day and over 25 MPa after 28 days, ensuring a durable repair.Q6: What is the working time after mixing?A: The pot life is approximately 30 minutes at 18-20°C. Higher temperatures will shorten this time, so mix only as much as you can use within this period.Q7: Can it be used on exterior walls?A: Yes, it is suitable for both interior and exterior repair applications.Q8: What is the shelf life?A: It has a shelf life of 6 months from the date of production when stored in a cool, dry place in its original, unopened packaging.Q9: What safety precautions should be taken?A: Wear gloves and safety glasses. The product can be irritating to skin and eyes. Refer to the Material Safety Data Sheet (MSDS) for detailed safety information.

 91 000 74051 MYK ReArm Fix 10S - Instant Leak Stopping Cement (Fast Setting) is a chloride-free, rapid-setting cement that hardens instantly upon contact with water. It is specifically designed for emergency leak sealing in pipes, manholes, tunnels, and concrete structures. It can be used in its dry form or as a paste to plug active leaks quickly and effectively.
Key Benefits:
Instantly Stops Leaks: Sets immediately to plug running water leaks.Easy to Use: Can be applied directly as a dry powder or mixed into a paste.Chloride-Free: Safe for reinforced concrete, prevents corrosion.Versatile: Ideal for pipes, basements, manholes, and water tanks.Portable Packaging: Available in convenient 1kg and 12kg packs.
Approximate Market Price:12 kg Bag: 550 TO 790(Contact CIVILIZEMART for exact pricing!)
Questions and Answers: Q1: What is the primary use of ReArm Fix 10S?A: Its main use is for emergency leak sealing. It is perfect for instantly stopping active water leaks from burst pipes, in manholes, tunnels, and concrete walls.Q2: How do you use it to stop a leak?A: For active leaks, you can press the dry powder directly into the leak point. Alternatively, mix it with a little water to form a stiff paste; as soon as the mix feels hot, press and hold it firmly against the leak for 1-2 minutes until it sets.Q3: Does it work on active, flowing water leaks?A: Yes, that is its specialty. It is designed to set and harden even in the presence of water, making it highly effective for plugging active leaks.Q4: What is the approximate price?A:The approximate price for a 12 kg bag is 550 TO 790.Please message CIVILIZEMART us for the best price.Q5: Is it safe for concrete with steel reinforcement?A: Yes, it is chloride-free, which means it will not cause corrosion to steel reinforcement bars within the concrete.Q6: How fast does it set?A: It is an instant-setting product. It begins to harden within seconds to minutes upon contact with water.Q7: What pack sizes are available?A: It is available in convenient sizes: a small 1 kg pouch for minor repairs and a larger 12 kg bag for bigger jobs.Q8: What is the shelf life?A: It has a shelf life of 12 months from the date of manufacture when stored in a cool, dry place.Q9: What safety precautions should be taken?A: Always wear protective gloves and safety glasses. The product contains cement and can cause skin and eye irritation. Wash immediately with plenty of water if contact occurs.

 91 000 74051 MYK ReArm Fix 10S - Instant Leak Stopping Cement (Fast Setting) is a chloride-free, rapid-setting cement that hardens instantly upon contact with water. It is specifically designed for emergency leak sealing in pipes, manholes, tunnels, and concrete structures. It can be used in its dry form or as a paste to plug active leaks quickly and effectively.
Key Benefits:
Instantly Stops Leaks: Sets immediately to plug running water leaks.Easy to Use: Can be applied directly as a dry powder or mixed into a paste.Chloride-Free: Safe for reinforced concrete, prevents corrosion.Versatile: Ideal for pipes, basements, manholes, and water tanks.Portable Packaging: Available in convenient 1kg and 12kg packs.
Approximate Market Price:12 kg Bag: 550 TO 790(Contact CIVILIZEMART for exact pricing!)
Questions and Answers: Q1: What is the primary use of ReArm Fix 10S?A: Its main use is for emergency leak sealing. It is perfect for instantly stopping active water leaks from burst pipes, in manholes, tunnels, and concrete walls.Q2: How do you use it to stop a leak?A: For active leaks, you can press the dry powder directly into the leak point. Alternatively, mix it with a little water to form a stiff paste; as soon as the mix feels hot, press and hold it firmly against the leak for 1-2 minutes until it sets.Q3: Does it work on active, flowing water leaks?A: Yes, that is its specialty. It is designed to set and harden even in the presence of water, making it highly effective for plugging active leaks.Q4: What is the approximate price?A:The approximate price for a 12 kg bag is 550 TO 790.Please message CIVILIZEMART us for the best price.Q5: Is it safe for concrete with steel reinforcement?A: Yes, it is chloride-free, which means it will not cause corrosion to steel reinforcement bars within the concrete.Q6: How fast does it set?A: It is an instant-setting product. It begins to harden within seconds to minutes upon contact with water.Q7: What pack sizes are available?A: It is available in convenient sizes: a small 1 kg pouch for minor repairs and a larger 12 kg bag for bigger jobs.Q8: What is the shelf life?A: It has a shelf life of 12 months from the date of manufacture when stored in a cool, dry place.Q9: What safety precautions should be taken?A: Always wear protective gloves and safety glasses. The product contains cement and can cause skin and eye irritation. Wash immediately with plenty of water if contact occurs.

 91 000 74051 SealArm PS-P is two packs Polysulphide based, tough flexible durable with strong adhesive sealant and is a pourable version,basically used for movement joints in concrete and pavements

 91 000 74051 AquaArm Proof IWP-10 is a chloride-free liquid based on selected sugar reduced Lingo sulphonates AquaArm Proof WP10 waterproofs by improving the quality of the Concrete or Mortar. It reduces the water demand for required workability and minimizes segregation and bleeding. It is in liquid form and shows excellent dispersion and is more efficient compared to traditional powder waterproofers.

 91 000 74051 ReArm Bond EBA is a solvent-free, two-part epoxy resin bonding agent provided in pre-weighed kits. It offers high mechanical strength, excellent adhesion, and is suitable for bonding new concrete to old surfaces—even under damp conditions. Ideal for structural repairs, toppings, overlays, and jacketing applications.
Key Features & BenefitsHigh bond strength and durability for new-to-old concrete adhesionExtended pot life allows flexible working time (2 hours at 30 °C)Solvent-free, ideal for safe handling and sensitive environmentSuperior mechanical performance:Compressive Strength: 51 N/mm² (7 days)Flexural Strength: 35 N/mm² (7 days)Tensile Strength: 20 N/mm² (7 days)Shear Strength: 10 N/mm²
Q1. What is ReArm Bond EBA used for?A: It bonds new concrete or mortar to existing substrates—ideal for overlays, structural repairs, loading bays, bridges, road repair overlays, and jacketing. Also works effectively on damp and vertical/horizontal surfaces.Q2. What packaging options are available?A: Comes in pre-measured 1 kg, 3 kg, and 6 kg kits for easy mixing and onsite use.Q3. What is the pot life and overlay time?A: Pot life is approximately 2 hours at 30 °C and 6 hours at 20 °C. Overlay time is around 6 hours at 30 °C.Q4. How strong is it once cured?A: After 7 days:Compressive: 51 N/mm²Flexural: 35 N/mm²Tensile: 20 N/mm²Shear: 10 N/mm²Q5. How to apply it?A: Clean and prepare bonding surface. Mix resin and hardener using low-speed mixer for ~2–3 minutes. Apply evenly with brush. Place fresh concrete or mortar within 6–8 hours, depending on temperature.Q6. What is the typical coverage?A: Coverage is approximately 2.6 m² per 1 kg kit, though actual coverage will depend on surface porosity and application technique.Q7. Shelf life and storage conditions?A: Shelf life is 12 months, stored in a cool, dry place in unopened containers.Q8. Price estimate?A: Approximate selling price:- per kg, as listed by distributors. Prices may vary by region—contact CivilizeMart for exact rates.

91000 74051 What it is: A single-component, high-build, fibre-reinforced, elastomeric acrylic coating designed for waterproofing roofs. It is applied in multiple layers (minimum 3 recommended) to form a seamless, flexible, and durable membrane.
Primary Function: To provide a robust, waterproof barrier that bridges hairline cracks and withstands weather exposure. Its key advantage is that it can often be applied directly onto existing sound surfaces without the need for demolition, saving time and cost.
Key Features & Benefits (from TDS):
High-Build & Fibre-Reinforced: Achieves a thick, tough film in fewer coats (approx. 1mm DFT in 3 coats).
Direct Application: Can be applied on sound existing concrete, brickbat coba, or screed without removal.
No Protection Screed Needed: Eliminates the extra weight and cost of a protective concrete layer; it is final wearing surface for foot traffic.
Breathable: Allows water vapour to escape from the structure.
Weather & UV Resistant: Durable in all climates, with tested resistance to 1000 hours of UV radiation.
Crack Bridging: Excellent elongation (100%) to accommodate minor substrate movement.
Low Chloride Permeability: Protects the concrete structure from corrosion.
Ideal Applications:
Waterproofing old and new concrete roofs and terraces.
Surfaces like existing concrete, brickbat coba, and screed.
Packaging: 25 kg buckets.
Questions & Answers (Q&A) Based on TDSQ1: Can this be applied directly over my old existing roof?A: Yes, provided the existing substrate (concrete, brickbat coba, screed) is sound and stable. All loose, spalled, or disintegrated material must be removed and repaired first. The surface must be clean and free of oil, grease, and dirt.
Q2: What primer should I use?A: The TDS specifically recommends FloArm Primer EPW-44, a two-component epoxy-based primer. It has a pot life of 30 minutes once mixed and must be applied on a damp (SSD - Saturated Surface Dry) surface. The waterproofing coat is applied while the primer is still tacky.
Q3: What is the coverage area?A: The consumption rate is 0.75 kg per square meter per coat. For the recommended 3-coat system, you will need 2.25 kg per square meter.
Example: A 25 kg bucket will cover approximately 11 sq. meters for a 3-coat system (25 kg / 2.25 kg/m² = ~11.1 m²).
Q4: How thick will the coating be?A: Three coats will achieve a Dry Film Thickness (DFT) of approximately 1 mm.
Q5: What is the drying time between coats?A: The next coat can be applied once the previous coat is touch-dry. The recommended over-coating time is 8-12 hours at 27°C.
Q6: Is this the final layer, or does it need a protection screed?A: This is a major benefit. AquaArm Roof Shield is designed to be the final layer and does not require a protection screed, eliminating extra weight and cost. It can withstand light foot traffic.
Q7: What is the shelf life?A: 6 months from the date of manufacture in unopened, original packaging stored in a cool, dry place.
Q8: What are the limitations?A:
Do not apply during rain.
The substrate must be in a damp (SSD) condition for priming.
It is designed only for foot traffic, not for vehicular movement or heavy machinery.
Q9: Is it safe?A: It is non-toxic and non-flammable. However, it is alkaline, so gloves and goggles should be worn during handling. Splashes should be washed off with clean water.

 91 000 74051 It is single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make themwaterproof. The coating is UV stable and highly reflective with high flexibility

 91 000 74951 MYK Arment ReArm Rust Remover is a highly effective, industrial-grade liquid formulation engineered to dissolve rust and corrosion, as well as remove thin films of oil and grease from steel and metal surfaces. With its high purity (95–100%) and smooth, colorless consistency, it ensures rapid, residue-free restoration, making surfaces ready for priming or coating.
Key Features & Benefits
High-purity (95–100%) formulation that leaves no residue or staining. Suitable for removing rust, light scale, oil, and grease from iron, steel, aluminum, and similar surfaces. Designed for industrial and construction applications, offering smooth application and dependable performance. Available in convenient liquid form – bottles of 500 ml to 1 L, 20L ideal for routine site use.
FAQ (Questions & Answers)
Q1. What is MYK Arment ReArm Rust Remover used for?A: It dissolves rust, light scale, oil, and grease from metal surfaces, restoring them to a clean, primer-ready condition. Q2. What materials are compatible?A: Safe for use on various metals, including iron, steel, aluminum, and more. Q3. What form does it come in and packaging sizes?A: It comes as a colorless liquid with a sharp odor, commonly packaged in 500 ml and 1 L bottles and 20 L. Q4. What is its purity and texture?A: The product maintains a 95–100% purity, offering a high-gloss, smooth texture without surface residue. Q5. Suitable applications?A: Perfect for industrial or onsite use — especially in construction, fabrication, automotive repair, and metal Q6. What is the typical price?A: Price ranges from approximately:3588 20liters

 91 000 74051 AquaArm C-35 is a powder based integral crystalline water proofing system. It consists of Cement and various active chemicals. These active chemicals react with water and bye products of cement hydration which cause a catalytic reaction to form non soluble crystals. These crystals block the pore and capillaries of the concrete and thus concrete becomes permanently sealed from penetration of water. It conforms to ACI-212 3R-10 PRAH Category, BS 8102, IS 16471 Type-B Water Proofing System

 91 000 74051 AquaArm PU 2K P, a liquid applied membrane is a kind of waterproof coating with two component chemicals, component A isa Polyurethane pre-polymer, component B has a curing agent and special additives.When applied, AquaArm PU 2K P creates a continuous watertight seal. It has also excellent adhesion to almost allconstruction substrates. It keeps outstanding performances for a very long period.

 91 000 74051 FloArm Hard Q is a ready to use Non Metallic floor and surface hardener, it is a factory blended powder containing specialhard wearing aggregates. FloArm Hard Q is a blend of port land cement and special additives which produces materialeasy to trowel into fresh wet concrete. FloArm Hard Q provides a dense non-porous surface which is extremely hardwearing and abrasion resistant. It can be applied for wet rooms as well as outdoor applications

 91 000 74051 Seal Arm PS G is two packs Polysulphide based, tough flexible durable with strong adhesive sealant basically used formovement joints in concrete and pavements. When the two packs are mixed and it forms tough, flexible durable rubberlike material with strong adhesive property on most building substrates and joints.

 91 000 74051 FloArm Primer 1260 is a two-component solvent free, low viscous epoxy resin primer for both horizontal & verticalapplications. It may also be used for producing leveling and scratch coats for surface preparation prior to final flooring.

 91 000 74051 ArmGrout Inject PU1 resin is a solvent free polyurethane injection material which is used in conjunction with ArmGrout InjectPU1 catalyst. ArmGrout Inject PU1 foams with water contact by high increase in volume and becomes firm visco elastic foam,which seals temporarily against further water penetration. ArmGrout Inject PU1 is resistant against acids and lyes and attacksneither bitumen nor joint tapes. In case of very dry surfaces the material does not foam immediately but it hardens slowly dueto the steady addition of existing air resp. soil moisture.

 91 000 74051 ArmGrout HF is a Polyester based two components, resin system made for to give excellent anchorage with goodcorrosion resistance.Rock bolting (in tunnels etc) Fixing of foundation bolts Fixing of reinforcementRapid Strength Corrosion resistant Even can be applied under water Good consistency Vibration resistant.

 91 000 74051 ArmGrout HF is a Polyester based two components, resin system made for to give excellent anchorage with goodcorrosion resistance.Rock bolting (in tunnels etc) Fixing of foundation bolts Fixing of reinforcementRapid Strength Corrosion resistant Even can be applied under water Good consistency Vibration resistant.

 91 000 74051 ArmGrout M-65 is recommended for precision grouting where it is essential to with stand static load in typical applications like base plate of Generators, compressors, boilers etc. It is basically a free flow no shrink, high strength expansive grout. It is based on port land cement with graded aggregates and additives which impart controlled expansion in the plastic state. The non-shrink grout function is three folds, to fill the voids between the base plate and the concrete foundations completely and permanently without shrinkage or separating from either to transfer all loads from the base plate to the concrete foundation and to maintain precise alignment. It effectively transfers all operational loads to the foundation

 91 000 74051 AquaArm IC is a state-of the art one component, penetrating crystalline material for waterproofing and protectingnew or old structurally sound concrete. It resists strong hydrostatic pressure. AquaArm IC is powered byadvanced crystalline technology which chemically reacts with moisture and free lime to reduce the waterabsorption of the resultant cement matrix within the concrete. This is a result of the formation of nano-scalecrystals by the active catalysts present in the capillary system. This sustains a durable waterproof effect in theconcrete, thereby blocking the passage of water. This reaction will continue to take place anytime water ispresent for the life of the concrete structure where by making the AquaArm IC a truly permanent and integralwaterproofing solution. The AquaArm IC nano-crystals will also grow in and along static hairline crack sealingthem and preventing further incoming water

 91 000 74051 It is single component water based acrylic waterproof coating. It can be applied to most structural surfaces to make themwaterproof. The coating is UV stable and highly reflective with high flexibility