Civilize Mart

•  91 000 74051 PUA 212® is a two component, modified Polyurethane Adhesive designed for the installation of ceramic tile, vitrified tile, metal tile, glass tile, agglomerates, glass mosaic tile and natural stone on any substrate. It is highly elastic, thixotropic and suitable to lay water sensitive tiles & stones on highly expandable, deformable, absorbent and non-absorbent substrates.

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

•  91 000 74051 It’s a polymer-modified tile adhesive (cementitious mortar), designed to fix tiles or natural stone on floors and walls — both interior and exterior. 

• It’s especially suited for large-format tiles, heavy tiles, porcelain, natural stone, and even tile-on-tile applications. 

• Highly deformable / flexible: can absorb structural movements or thermal expansions without cracking — useful in buildings where there may be shifts or vibrations. 

• Strong bond strength: good shear and tensile adhesion, ensuring tiles stay fixed firmly even on demanding surfaces. 

• Versatile surfaces: works over concrete, cement mortar, plaster, existing tile/stone surfaces, etc. Thin-bed to medium-bed applications: you can apply from thin to modest bed thickness (typical up to ~15 mm). 

• Usable in wet areas: suitable for bathrooms, balconies, even swimming-pool areas (for appropriate tiles/stones), since it has good water- and moisture-resistance once cured.

• Laying ceramic, vitrified, or porcelain tiles — on floors or walls.

• Installing natural stone tiles or large-format tiles (where regular thin-set mortars may crack).

• Renovation work where you may want to tile over existing tiles or stones.

• Wet-area flooring/walls (bathrooms, balconies, terraces) or high-traffic areas (lobbies, kitchens, external facades) — because of its strong adhesion and flexibility

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

•  91 000 74051 It’s a polymer-modified tile adhesive (cementitious mortar), designed to fix tiles or natural stone on floors and walls — both interior and exterior. 

• It’s especially suited for large-format tiles, heavy tiles, porcelain, natural stone, and even tile-on-tile applications. 

• Highly deformable / flexible: can absorb structural movements or thermal expansions without cracking — useful in buildings where there may be shifts or vibrations. 

• Strong bond strength: good shear and tensile adhesion, ensuring tiles stay fixed firmly even on demanding surfaces. 

• Versatile surfaces: works over concrete, cement mortar, plaster, existing tile/stone surfaces, etc. Thin-bed to medium-bed applications: you can apply from thin to modest bed thickness (typical up to ~15 mm). 

• Usable in wet areas: suitable for bathrooms, balconies, even swimming-pool areas (for appropriate tiles/stones), since it has good water- and moisture-resistance once cured.

• Laying ceramic, vitrified, or porcelain tiles — on floors or walls.

• Installing natural stone tiles or large-format tiles (where regular thin-set mortars may crack).

• Renovation work where you may want to tile over existing tiles or stones.

• Wet-area flooring/walls (bathrooms, balconies, terraces) or high-traffic areas (lobbies, kitchens, external facades) — because of its strong adhesion and flexibility

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

• Useful as the levelling bed before installation of natural stones and all varieties of tiles
• Makes the tile or stone bedding moisture-free, so that absorbent natural stones do not develop stains
• Recommended for interior and exterior applications

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

•  91 000 74051 PUA 212® is a two component, modified Polyurethane Adhesive designed for the installation of ceramic tile, vitrified tile, metal tile, glass tile, agglomerates, glass mosaic tile and natural stone on any substrate. It is highly elastic, thixotropic and suitable to lay water sensitive tiles & stones on highly expandable, deformable, absorbent and non-absorbent substrates.

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

•  91 000 74051 Preserva is a nano-technology impregnating sealer + enhancer designed for natural stone, tiles and textured/porous surfaces. 

• It’s not a grout — it’s a surface treatment that penetrates into the stone/tile, rather than sitting on top, to provide long-term protection and aesthetic enhancement. It’s typically available in liquid form (pack sizes such as 1 L, 5 L, 20 L) to be applied via cloth, brush, roller etc.

When applied correctly, Preserva offers:

• Water & oil / stain resistance — treated surfaces repel water, oil, staining agents, helping protect stone/tile from spills and dirt. 

• Enhanced appearance (natural colour enhancement / wet-look) — it can “revive” dull-looking stone or tile, enriching its colour and making it look more vibrant or “wet”.  Harder, less slippery surface — after treatment, texture tends to become more resistant and safer (less slippery), especially helpful for outdoor or wet-area use. 

• Weather / UV resistance & durability — suitable for both indoor and outdoor use; helps protect against environmental wear, moisture, and general wear & tear. 

• Breathable & non-film forming — because it impregnates rather than coats, the surface remains “breathable” (vapour can escape), avoiding issues like peeling or surface film. 

Preserva is especially useful when:

• You have natural or textured stone (granite, limestone, marble, slate, etc.) or porous tiles / textured surfaces — places where water/stain absorption is a risk.

• You want to improve appearance — e.g. giving a “wet look” to dull stone or making patterns/colours richer.

• Surfaces are exterior, exposed to weather/UV, or in wet zones (balcony, patio, bathroom, kitchen, outdoor pavements) and need protection against water, dust, stains, weathering.

• You want low-maintenance, long-lasting protection — especially if you prefer surfaces that are easier to clean and more resistant to staining over time.

• You are finishing an installation of stone/tile and want to seal and protect on completion (or periodically maintain and refresh protection).

• It is not a substitute for grout or epoxy grouting — it doesn’t fill joints or seal gaps between tiles/stones. Use grout or epoxy for that.

• It will not prevent acid-etching or mechanical wear on the surface — if you scrub hard, use harsh acids or abrasive cleaners, surface finish can still degrade over time. 

• For extremely high-traffic or heavy industrial floors (exposed to chemicals/heavy wear), it might need re-application over time for continued performance — sealers degrade under heavy use/harsh conditions. On very smooth or non-porous tiles/stones, the benefit will be minimal (since there isn’t much porosity to “penetrate”).

•  91 000 74051 Preserva is a nano-technology impregnating sealer + enhancer designed for natural stone, tiles and textured/porous surfaces. 

• It’s not a grout — it’s a surface treatment that penetrates into the stone/tile, rather than sitting on top, to provide long-term protection and aesthetic enhancement. It’s typically available in liquid form (pack sizes such as 1 L, 5 L, 20 L) to be applied via cloth, brush, roller etc.

When applied correctly, Preserva offers:

• Water & oil / stain resistance — treated surfaces repel water, oil, staining agents, helping protect stone/tile from spills and dirt. 

• Enhanced appearance (natural colour enhancement / wet-look) — it can “revive” dull-looking stone or tile, enriching its colour and making it look more vibrant or “wet”.  Harder, less slippery surface — after treatment, texture tends to become more resistant and safer (less slippery), especially helpful for outdoor or wet-area use. 

• Weather / UV resistance & durability — suitable for both indoor and outdoor use; helps protect against environmental wear, moisture, and general wear & tear. 

• Breathable & non-film forming — because it impregnates rather than coats, the surface remains “breathable” (vapour can escape), avoiding issues like peeling or surface film. 

Preserva is especially useful when:

• You have natural or textured stone (granite, limestone, marble, slate, etc.) or porous tiles / textured surfaces — places where water/stain absorption is a risk.

• You want to improve appearance — e.g. giving a “wet look” to dull stone or making patterns/colours richer.

• Surfaces are exterior, exposed to weather/UV, or in wet zones (balcony, patio, bathroom, kitchen, outdoor pavements) and need protection against water, dust, stains, weathering.

• You want low-maintenance, long-lasting protection — especially if you prefer surfaces that are easier to clean and more resistant to staining over time.

• You are finishing an installation of stone/tile and want to seal and protect on completion (or periodically maintain and refresh protection).

• It is not a substitute for grout or epoxy grouting — it doesn’t fill joints or seal gaps between tiles/stones. Use grout or epoxy for that.

• It will not prevent acid-etching or mechanical wear on the surface — if you scrub hard, use harsh acids or abrasive cleaners, surface finish can still degrade over time. 

• For extremely high-traffic or heavy industrial floors (exposed to chemicals/heavy wear), it might need re-application over time for continued performance — sealers degrade under heavy use/harsh conditions. On very smooth or non-porous tiles/stones, the benefit will be minimal (since there isn’t much porosity to “penetrate”).

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.