Civilize Mart

 91 000 74051 Bostik Smartflex+ Hybrid is a single-component hybrid sealant designed for sealing and waterproofing joints in construction. It uses advanced hybrid technology (combining the advantages of polyurethane and silicone) to provide strong adhesion, flexibility, and weather resistance in a variety of substrates. 

�� Key Features

• Hybrid formulation — advanced technology that offers superior performance combining benefits of different chemistries (e.g., flexibility of PU and weather resistance of silicone).

• One component & ready to use — no mixing required; simple to apply with a sealant gun.

• Excellent adhesion — sticks well to many materials like metal, glass, concrete, UPVC, and composite panels.

• Flexible & elastic — capable of absorbing movement in joints without cracking.

• UV & weather resistant — suitable for both interior and exterior applications.No bubble formation on curing — gives smooth and stable seals.

• Free of solvents & isocyanates — less harmful fumes and safer for application.

��️ Typical Applications

✔ Sealing expansion and construction joints in buildings
✔ Waterproofing gaps around doors, windows, panels & facade units
✔ Sealing joints between different materials (e.g., aluminum, steel, concrete, UPVC)
✔ General waterproof sealing where flexibility and weather resistance are needed

�� Limitations

❌ Not recommended on plastics like PP, PE, PC, PMMA, PTFE or soft plastics
❌ Not suitable for continuous water immersion applications (e.g., constant submerged conditions)

�� Usage Notes

• Apply on clean, dry, and grease-free surfaces for best bonding.

• For very porous substrates like bare concrete, priming may be needed to improve adhesion.

• Use a professional sealant gun for 600 ml sausage packs.

 

SikaHyflex®-600 is a 1-component, moisture curing,low-modulus elastic weather sealant. SikaHyflex®-600is supplied in colour shades transparent.USESSikaHyflex®-600 is designed for applications where theappearance of the sealant is important (translucencelook). SikaHyflex®-600 is particularly suited as a sealant for store fronts, glass partition walls and othersuch applications.

Soudaseal 650 HT is a high quality, neutral, elastic, 1-component adhesive sealant based on MS-Polyme with a very high initial tack. Properties: • High initial tack reducing the need for initial support • Fast curing • Good extrudability • High shear strength after full cure (no primer) • Stays elastic after curing and very sustainable • No odour • Can be painted with water based systems • Good weather and UV resistance • Does not contain isocyanates and no silicones

 91 000 74051 The McCoy Builder PU LM Grey (600 ml) is a high-quality, elastic, one-component polyurethane-based sealant designed for various construction applications. It offers excellent adhesion to numerous materials and remains permanently elastic after curing. The sealant exhibits strong resistance to UV radiation and various chemicals, ensuring durability in diverse environments.

Key Features:

• Easy application
• Permanent elasticity post-curing
• Superior adhesion on multiple substrates
• Outstanding resistance to UV radiation
• Robust chemical resistance

Applications:

• Expansion joints in buildings with significant movement
• Sealing and bonding precast panels, wood, aluminum, and PVC joinery seams
• Curtain walls
• Concrete roof tiles
• Connection joints between window and door frames and walls
• Expansion joints in traditional construction materials

Technical Specifications:

• Consistency: Stable paste
• Curing System: Moisture curing
• Density: Approximately 1.20 g/ml
• Skin Formation Time: 20-40 minutes at 23°C and 50% relative humidity
• Curing Rate: 2-3 mm per 24 hours at 23°C and 50% relative humidity
• Hardness (Shore A): 40 ± 5
• Elongation at Break: Over 600%
• Tensile Strength: Greater than 1.8 N/mm²
• Application Temperature: Between 5°C and 35°C
• Temperature Resistance: From -30°C to 90°C

The product is available in a 600 ml sausage packaging and comes in grey color. Other colors may be available upon request. For optimal storage, keep the sealant in its unopened packaging in a cool, dry place at temperatures between +5°C and +25°C. The shelf life is 12 months under these conditions.

For more detailed information, you can refer to the product page on McCoy Mart:

 91 000 74051 Asian Paints SmartCare Hybrid PU Sealant is a single component, moisture curing, low modulus silyl terminated polyurethane sealant for sealing of dynamic joints and cracks in interiors as well as exteriors. After curing, it forms a flexible rubber-type seal that is paintable. 

 91 000 74051 Bostik P795 SEAL’N’FLEX PREMIUM is a New Generation one component user friendly low MDI fast curing high performance and durable polyurethane sealant. Bostik P795 SEAL’N’FLEX PREMIUM will not form bubbles during its curing process.

 91 000 74051 Feviseal HY-100 is a one-component, moisture-curing, low-modulus hybrid sealant (silyl-modified polymer) engineered to combine the benefits of polyurethane & silicone sealants. It offers excellent elasticity, adhesion, durability, and resistance to UV, weather, and aggressive atmospheres. It cures without sagging and is solvent / isocyanate-free. 

Key Features & Benefits
Single-component, moisture-curing; no mixing required. 

Low modulus (flexible) — accommodates joint movement (±25 %) and elongation up to ~400 %. 

Good adhesion to multiple substrates: concrete, metal, brick, marble, tiles, etc. Primer-less adhesion in many cases. 

Damp surface tolerant; non-sag paste (stays in place on vertical joints) 

Resistant to UV, weather, chemicals. Low dirt pickup. Non-staining.

 

Q1. What joints is HY-100 suitable for?

It is suited for expansion, construction, control joints, and materials that move due to temperature or structural shifts. It also works between different building materials.

Q2. Is primer needed?

In most cases no primer is necessary. But for continuously wet or highly porous surfaces, using a primer (or “Pidiprime A”) may improve adhesion. 

Q3. Can it be used on damp surfaces?

Yes, it is damp surface tolerant. However, too much water (ponding) may affect curing. 

Q4. What is the joint depth vs width ratio?

For joints of 6-12 mm width, the depth should be 1:1. For wider joints (12-25 mm), depth ≈ half the width (2:1 ratio to width). 

Q5. What temperature range is good for application?

Recommended application range is roughly 5 °C to 40 °C. Storage and pre-conditioning may help at cold temps. 

Q6. What surfaces should it not be used on?

Natural stone joints that may stain. 

Constantly chlorinated water immersion (pools, spa) or salt water immersion. 

Bituminous surfaces, some plastics like PP, PE, Teflon etc. 

Q7. What is the approximate price?

Listed at ₹410 for 600 ml pack at certain dealers. Price may vary with region and seller.

MasterSeal NP 473U is a high performance, one component, moisture curing, polyurethane construction sealant. It has been formulated with an optimum range of physical properties such as high elasticity and movement accommodation, non-sag, Shore A hardness, tensile / tear strength and modulus to make it perfectly suited for sealing dynamically moving joints in a wide range of internal and external, horizontal and vertical applications, making it almost the perfect “Universal” joint sealant.

 91 000 74051 Asian Paints SmartCare Hybrid PU Sealant is a single component, moisture curing, low modulus silyl terminated polyurethane sealant for sealing of dynamic joints and cracks in interiors as well as exteriors. After curing, it forms a flexible rubber-type seal that is paintable. 

 91 000 74051 SealArm PU is a single-component, medium-modulus, moisture-curing elastic polyurethane sealant designed for demanding joint sealing applications. It’s ideal for expansion and control joints in areas such as industrial floors, breweries, dairies, commercial kitchens, balconies, terraces, concrete panel joints, window perimeters, steps, risers, roofs, and tilt wall joints. It cures upon exposure to atmospheric humidity and provides excellent flexibility and UV stability.
Key Features & BenefitsSingle-component (moisture curing)—minimizes wasteHigh elasticity with up to 200% elongation, accommodating 25% movementExcellent adhesion to diverse construction materialsUV-stable and resistant to dilute acids, alkalis, salts, water-based cleaners, hot oils, and fatsComplies with ASTM C-920 Type S, Grade NS, Class 25 and BS 6920 for potable water use
Q1. What applications is SealArm PU suitable for?It’s used for sealing expansion and control joints in heavy-duty areas like industrial floors, breweries, kitchens, balconies, terraces, precast panels, window perimeters, steps, roofs, and more.Q2. How elastic is it?It offers approx. 200% elongation and accommodates up to 25% joint movement, ensuring durability under structural changes.Q3. How is it applied and what preparation is needed?Ensure the surface is clean, dry, and adherent (e.g., abraded or solvent-cleaned as necessary). Insert backing rods, apply primer if the substrate is porous, and extrude sealant directly from the sausage pack using a caulking gun or applicator.Q4. What environmental resistance does it offer?UV-stable and highly resistant to dilute acids, alkalis, salts, water-based cleaners, and hot oils/fats, making it ideal for both indoor and outdoor applications.Q5. Available sizes and packaging?Available in 600 ml sausage packs, typically sold individually.Q6. Shelf life and storage conditions?Shelf life is 12 months when stored in a cool, dry environment and sealed.Q7. What is the approximate price?Prices range around depending on supplier and location VISIT OR CONTACT CIVILIZEMART

Fire Silicone B1 FR is a high-quality, fire-resistant,smoke-tight, neutral, elastic, one-component joint sealantbased on silicones.Properties:• High level of fire retardation• Sealant for preventing the passage of smoke and gas• Very good adhesion on many materials• Permanently elastic after curing (without- fire load)• Very easy to apply• Excellent UV stability• MEKO free• Not suitable for natural stone• Not paintable