Civilize Mart

 91 000 74051 Sikaflex® Construction is designed for movement and connection joints on porous substrates as well as indoor and outdoor sealing applications.
AdvantagesOne component, ready to useFast-curingNon-sagBubble-free curingCan be overpaintedHigh tear resistanceVery good adhesion to many substratesGood weather and ageing resistance

91 000 74051 SikaTop®-551 Seal is a two-component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials.It is manufactured locally in India . SikaTop®-551 Seal provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SikaTop®-551 Seal provides a hard wearing, seamless, waterproof membrane for wet areas, roofs and foundation protection.

91 000 74051 SikaTop®-551 Seal is a two-component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials.It is manufactured locally in India . SikaTop®-551 Seal provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SikaTop®-551 Seal provides a hard wearing, seamless, waterproof membrane for wet areas, roofs and foundation protection.

91 000 74051 SikaTop®-551 Seal is a two-component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials.It is manufactured locally in India . SikaTop®-551 Seal provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SikaTop®-551 Seal provides a hard wearing, seamless, waterproof membrane for wet areas, roofs and foundation protection.

 91 000 74051 Sikadur®-32 IN is a solvent-free, two component bonding agent, based on selected epoxy resins.

 91 000 74051 Sikadur®-32 IN is a solvent-free, two component bonding agent, based on selected epoxy resins.

 91 000 74051 Sikadur®-32 IN is a solvent-free, two component bonding agent, based on selected epoxy resins.

 91 000 74051 Sika Injection-101 IN is a two-component, water-reactive polyurethane resin that foams when it contacts water, forming a flexible, hydrophobic closed-cell foam. It’s designed for stopping running water leaks, filling cracks and joints in concrete under hydrostatic pressure—ideal for foundations, tunnels, water tanks, retaining walls, basements etc. 
Key Features & Benefits
Low viscosity resin for deep penetration into cracks & voids. Produces a flexible, closed-cell foam that is hydrophobic and resists future water ingress. Reacts with water to foam up to ~40× its original volume. Fast gel time (~10 seconds) allowing quick sealing. Comes pre-batched (5 kg kit: 4.5 kg base + 0.5 kg catalyst) for ease of use. Suitable for use under hydrostatic pressure.
Q1. How is Sika Injection-101 IN applied?Clean the crack/joint (remove loose particles, oil, wax).Seal around the injection packer (if needed) to avoid resin escaping.Mix Part A (base) and Part B (catalyst) at ~90:10 ratio (or adjust within allowed limits for reaction time). Use injection pump to inject resin at low pressure, allow foam to expand and seal.Once set, clean away excess.Q2. What is gel time & cure time?Gel time is about 10 seconds at ~25-30 °C. Tack-free / initial curing takes ~2 hours. Q3. What are the packaging & storage details?Comes as a pre-batched 5.0 kg kit: 4.5 kg base (Part A) + 0.5 kg catalyst (Part B). Store in sealed, unopened containers at 5-30 °C. Shelf-life ~12 months. Q4. Is it safe for potable water or for use in drinking water tanks?It is hydrophobic and resistant to fungi/microorganisms. But products like this are generally for structural waterproofing, not for direct contact with potable water without checking specific approvals. Always check local PDS / safety data. Q5. What surface temperature and ambient conditions are needed?Both ambient and substrate temperatures should be between +10 °C to +40 °C. Q6. How much does it cost (rough estimate)?Please Visit or Contact CivilizeMart More Information

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

91 000 74051  Sika® CemCrete is a multifunctional acrylic polymer emulsion for enhancing the properties of cement slurry or mortar. It provides a good adhesion, water resistance and improvement of several other properties.

91 000 74051  SikaGrout®-214 is a cement based, 1-component, ready to mix, high performance, free flowing shrinkage compensated expanding grout.

91 000 74051  Sika® Injection-101 IN is a low viscous, fast foaming, two component polyurethane hydrophobic resin, which reacts with water to produce a flexible foam. It is suitable for stopping water leaks and waterproofing of cracks and joints in concrete.

91 000 74051 Sika® Plastiment® VZ is a water based, liquid, set-retarding admixture that slows the chemical action of cement hydration, delaying the initial set in direct proportion to the dosage used. After the planned delay in initial set, hardening develops at an accelerated rate. Suitable for use in hot and tropical climatic conditions.

91 000 74051 A concrete / mortar admixture in liquid form that acts both as a plasticizer and waterproofing compound .Sika Plastocrete Super anedi high-performance water-reducing and plasticizing admixture. Idi concrete & mortar work lo workability ni increase chestundi, water requirement ni thagginchadam valla concrete strength improve avutundi.

 

91 000 74051  Sika® Rustop is cement bound synthetic resin modified 2-component coating for corrosion protection on reinforcement and concrete. Ideally suited to rehabilitate corroded reinforcement.

91 000 74051  SikaTop®-551 Seal is a two-component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials.It is manufactured locally in India . SikaTop®-551 Seal provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SikaTop®-551 Seal provides a hard wearing, seamless, waterproof membrane for wet areas, roofs and foundation protection.

 91 000 74051  SikaTop®-551 Seal is a two-component acrylic modified cementitious coating applied by brush, roller or trowel to waterproof and resurface concrete, masonry, and most other construction materials.It is manufactured locally in India . SikaTop®-551 Seal provides an effective barrier to waterborne salts and atmospheric gases. Fluid applied, SikaTop®-551 Seal provides a hard wearing, seamless, waterproof membrane for wet areas, roofs and foundation protection. 

91 000 74051  SikaTop® Seal 107 is a two-component, polymer-modified, cementitious waterproofing and protective slurry mortar for concrete. It is slightly flexible to tolerate fine cracks and suitable in both interior and exterior applications.

 91 000 74051 Sikadur®-32 is a multi-purpose structural epoxy adhesive, with medium viscosity (fluid), two component, for bonding new concrete on old concrete, metal sheets on concrete and use in general anchoring. Eventhough the product has a fluid consistency, it is not self-levelling. 

91 000 74051 Sikadur®-20 Crack Seal is a solvent-free, 2-component low viscosity and semi elastic liquid, based on epoxy resins. It is used especially for sealing of non-structural cracks and cavities in concrete.

High performance joint sealing system for construction, expansion and connection joints as well as for cracks. When fixed to the joint, allows irregular and high movement in more than one direction, while maintaining a high quality seal. The Sikadur Combiflex SG System consists of a modified flexible Polyolefin (FPO) waterproofing tape with advanced adhesion using Sikadur 31, Hi-Mod Gel (1:1 Mix Ratio).

 91 000 74051 Sikagard® -67 is a water based, solvent free, odourless, epoxy resin protective coating. 

91 000 74051 Sikalastic®-800 HA is a two component, solvent free, highly elastic, low odour polyurea hybrid waterproofing membrane. Due to its self-levelling properties Sikalastic®-800 HA is ideal for applications on protected podium decks and will provide a jointless surface, fully bonded, with crack bridging abilities.

91 000 74051 SikaShield® P24 PE IN 3 mm is an APP modified bituminous waterproofing membrane with a thickness of 3 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with polyethylene foil, which ensures the bond of the overlying layer. The underside of the product has a burn-off film for easy torch-application. 

91 000 74051 SikaShield® Primer S-30 IN is ready to use, single component, quick drying, low viscosity, solvent based modified bituminous primer which penetrates and activates the substrates. It improves adhesion between the substrate and preformed bituminous sheet membranes in SikaShield® range. 

 91 000 74051 SikaCeram®-850 Design is a 2-part, epoxy floor / wall tile coloured grout dispensed using a double side-byside cartridge. It has a smooth glossy finish which provides a durable chemical resistant surface for demanding applications and high cleanliness requirements.

 91 000 74051 Sika® Rustoff-100 is a single component liquid that removes rust and temporarily prevents further rusting of steel structures by providing a passivating coat. USES Sika® Rustoff-100 removes rust and temporarily prevents further rusting of: ▪ New or old reinforcement steel in construction ▪ Embedded steel in repairable structures ▪ ▪ Ball bearings, valves, tools etc. ▪ Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc. Ideal for protecting reinforcements with insufficient cover or in thin sections.

91 000 74051  Sika® Rustop is cement bound synthetic resin modified 2-component coating for corrosion protection on reinforcement and concrete. Ideally suited to rehabilitate corroded reinforcement

91 000 74051  Sika® Chapdur (IN) is a one part, preblended, coloured mineral dry shake hardener for concrete comprising of cement, specially selected natural mineral aggregates, admixtures and pigments. Sika® Chapdur (IN) provides a extremely hard wearing and abrasion resistant topping for monolithic floors. When sprinkled and trowelled into fresh wet concrete floors, it forms a coloured, dense and wear resistant smooth surface.

91 000 74051   SikaLatex® SBR is a superior modified styrene butadiene emulsion to be mixed with cement slurry, cement mortar, concrete or cementitious grout for improved adhesion and water resistance properties. It is fully soluble in water and is added directly to the gauging water of slurry, mortar, concrete or grout

91 000 74051  Sika® CemCrete is a multifunctional acrylic polymer emulsion for enhancing the properties of cement slurry or mortar. It provides a good adhesion, water resistance and improvement of several other properties.

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sikaflex® Construction is designed for movement and connection joints on porous substrates as well as indoor and outdoor sealing applications.
AdvantagesOne component, ready to useFast-curingNon-sagBubble-free curingCan be overpaintedHigh tear resistanceVery good adhesion to many substratesGood weather and ageing resistance

 91 000 74051 Sikaflex® Construction is designed for movement and connection joints on porous substrates as well as indoor and outdoor sealing applications.
AdvantagesOne component, ready to useFast-curingNon-sagBubble-free curingCan be overpaintedHigh tear resistanceVery good adhesion to many substratesGood weather and ageing resistance

 91 000 74051 Sikaflex® Construction is designed for movement and connection joints on porous substrates as well as indoor and outdoor sealing applications.
AdvantagesOne component, ready to useFast-curingNon-sagBubble-free curingCan be overpaintedHigh tear resistanceVery good adhesion to many substratesGood weather and ageing resistance

 91 000 74051 Sikaflex® Construction is designed for movement and connection joints on porous substrates as well as indoor and outdoor sealing applications.
AdvantagesOne component, ready to useFast-curingNon-sagBubble-free curingCan be overpaintedHigh tear resistanceVery good adhesion to many substratesGood weather and ageing resistance

  91 000 74051 Sika® Rustoff-100 is a single component liquid that removes rust and temporarily prevents further rusting of steel structures by providing a passivating coat. USES Sika® Rustoff-100 removes rust and temporarily prevents further rusting of: ▪ New or old reinforcement steel in construction ▪ Embedded steel in repairable structures ▪ ▪ Ball bearings, valves, tools etc. ▪ Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc. Ideal for protecting reinforcements with insufficient cover or in thin sections.

  91 000 74051 Sika® Rustoff-100 is a single component liquid that removes rust and temporarily prevents further rusting of steel structures by providing a passivating coat. USES Sika® Rustoff-100 removes rust and temporarily prevents further rusting of: ▪ New or old reinforcement steel in construction ▪ Embedded steel in repairable structures ▪ ▪ Ball bearings, valves, tools etc. ▪ Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc. Ideal for protecting reinforcements with insufficient cover or in thin sections.

  91 000 74051 Sika® Rustoff-100 is a single component liquid that removes rust and temporarily prevents further rusting of steel structures by providing a passivating coat. USES Sika® Rustoff-100 removes rust and temporarily prevents further rusting of: ▪ New or old reinforcement steel in construction ▪ Embedded steel in repairable structures ▪ ▪ Ball bearings, valves, tools etc. ▪ Various steel structures like tanks, water pipelines, effluent pipelines, trusses, purlins, rafters etc. Ideal for protecting reinforcements with insufficient cover or in thin sections.