Civilize Mart

 91 000 74051  SikaTop®-107 Seal IN is a two part, acrylic polymer modified cementitious liquid applied waterproofing coating system. It comprises of a liquid polymer and a cement based mix incorporating special admixtures. It is applied to concrete and mortar to prevent water in filtration.

 91 000 74051  SikaTop®-107 Seal IN is a two part, acrylic polymer modified cementitious liquid applied waterproofing coating system. It comprises of a liquid polymer and a cement based mix incorporating special admixtures. It is applied to concrete and mortar to prevent water in filtration.

 91 000 74051 Sika® CoolCoat is a flexible, liquid applied, single component, uv and weather resistant, acrylic waterproofing membrane for all types of exposed roof slabs(new and old),terraces(sloped and flat),etc. Sika® CoolCoat contains cross-linking polymers, special glass micro fibers, pigments and advanced antifungal additive that provides long lasting tough waterproofing membrane. The high Solar Reflective Index of the membrane serves as a heat reflective surface and reduces heat ingress keeping the interior of the building cooler. 

 91 000 74051 Sika Plastocrete Super anedi high-performance water-reducing and plasticizing admixture. Idi concrete & mortar work lo workability ni increase chestundi, water requirement ni thagginchadam valla concrete strength improve avutundi.

Key Features:

• Concrete workability clear ga improve avutundi

• Water consumption thagginchadam valla higher strength vastundi

• Honeycombing & segregation chances reduce avutayi

• Smooth & dense concrete finish ostundi

• Pumpable concrete ki suitable

Applications:

• RCC works (columns, beams, slabs)

• Footings & foundations

• Precast concrete elements

• General construction concrete

Benefits:

• Better compaction

• Improved durability

• Cement saving possibility

• Consistent quality concrete

Form: Liquid
Color: Brown
Brand: Sika

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.

 91 000 74051 SikaShield® P24 PE IN 3 mm is an APP modified bituminous waterproofing membrane with a thickness of 3 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with polyethylene foil, which ensures the bond of the overlying layer. The underside of the product has a burn-off film for easy torch-application

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaGrout-214 IN is a one-component, ready-to-mix, dual shrinkage-compensated cementitious grout. It’s flowable and pourable, engineered for precision grouting of heavy base plates, machine foundations, anchors, precast concrete joints, voids and sealing around penetration points. It develops very high strength, remains impact and vibration resistant, and bonds excellently to concrete even under static and dynamic loads. 
Key Features & BenefitsDual shrinkage compensated – expansion during early phase to offset shrinkage. Wide temperature usage – works well from just above 0 °C up to +200 °C. Adjustable consistency – pourable or flowable depending on water/powder ratio. Rapid strength development – good strength even at early ages. Excellent bond to concrete; no bleeding or segregation. Chemical / frost / oil / fire resistant; non-corrosive to bolts and baseplates.
Q1. How should SikaGrout-214 IN be mixed?Add clean water (as per mix ratio: ~0.15-0.16 for flowable). Mix slowly, pour powder into water while stirring; use paddle mixer or low speed (<500 rpm) for large volumes. Let air escape after mixing before placing.Q2. What cure / pre-treatment is needed on substrate?Substrate must be structurally sound, clean, free of loose debris, oil, dust. Pre-soak substrate to saturated surface dry condition (keep wet but without standing water). Q3. What consistency options exist?Flowable: easier spread and pour.Pourable: thicker, for larger gaps or vertical uses. Adjust water accordingly within specified range.Q4. How soon can load be applied / equipment used?Compressive strength after 1 day is already ~25 N/mm². For heavy load, better to wait 7 days for higher strength.Q5. Is it safe for anchor bolts / base plates?Yes—non-corrosive, chloride-free, safe for reinforcement and bolts. Q6. What is an approximate price?PLEASE VISIT CIVILIZEMART

 91 000 74051 SikaRep® Microcrete-4 is a factory-blended, high-performance, non-shrink, cementitious micro-concrete mix. Designed for deep structural repairs in concrete, it flows easily into restricted forms, compensates for shrinkage, develops rapid strength, and bonds well with old concrete. Ideal for repairing damaged beams, slabs, columns, tunnels, basements, and large gapes. 
Key Features & Benefits 
Pourable / pumpable consistency; flows easily without the need for vibration. Dual-stage expansion to compensate for plastic shrinkage and settlement.
 Rapid strength gain: strong early (1-day, 3-day) strengths enabling quicker reinstatement. High ultimate strength with good impact, vibration, chemical resistance; non-corrosive, non-toxic. Contains no added chloride, so safer for reinforced concrete.
 Adjustable consistency by controlling water: you can adjust flow / workability while maintaining properties.
Q1. What is the price per 30 kg bag?Typical posted rates are around 000 per 30 kg bag, depending on Please visit CIVILIZEMARTQ2. How much area / volume will 1 bag cover?Consumption is approximately 1,900 kg of powder per cubic meter of concrete (with water : powder = 0.15). So 30 kg covers ~0.0158 m³ ~ about 15-16 liters volume roughly. Exact depends on depth / thickness. Q3. Can it be pumped?Yes — the product is designed to be pourable/pumpable into restricted formwork without vibration. Q4. Is it safe for reinforced concrete / steel?Yes — it is non-corrosive, contains no added chloride. Q5. What is shelf life & storage?Shelf life is ~6 months from date of production if stored in unopened bags, in dry conditions, at temperature between +5-35 °C. Q6. Can the mix be adjusted for more flow?Yes — by using water-powder ratio within the recommended range (0.14 to 0.16) for higher flow, but avoid adding more water than specified as that can degrade strengths & increase shrinkage.

 91 000 74051 SikaRep® Microcrete-4 is a factory-blended, high-performance, non-shrink, cementitious micro-concrete mix. Designed for deep structural repairs in concrete, it flows easily into restricted forms, compensates for shrinkage, develops rapid strength, and bonds well with old concrete. Ideal for repairing damaged beams, slabs, columns, tunnels, basements, and large gapes. 
Key Features & Benefits 
Pourable / pumpable consistency; flows easily without the need for vibration. Dual-stage expansion to compensate for plastic shrinkage and settlement.
 Rapid strength gain: strong early (1-day, 3-day) strengths enabling quicker reinstatement. High ultimate strength with good impact, vibration, chemical resistance; non-corrosive, non-toxic. Contains no added chloride, so safer for reinforced concrete.
 Adjustable consistency by controlling water: you can adjust flow / workability while maintaining properties.
Q1. What is the price per 30 kg bag?Typical posted rates are around 000 per 30 kg bag, depending on Please visit CIVILIZEMARTQ2. How much area / volume will 1 bag cover?Consumption is approximately 1,900 kg of powder per cubic meter of concrete (with water : powder = 0.15). So 30 kg covers ~0.0158 m³ ~ about 15-16 liters volume roughly. Exact depends on depth / thickness. Q3. Can it be pumped?Yes — the product is designed to be pourable/pumpable into restricted formwork without vibration. Q4. Is it safe for reinforced concrete / steel?Yes — it is non-corrosive, contains no added chloride. Q5. What is shelf life & storage?Shelf life is ~6 months from date of production if stored in unopened bags, in dry conditions, at temperature between +5-35 °C. Q6. Can the mix be adjusted for more flow?Yes — by using water-powder ratio within the recommended range (0.14 to 0.16) for higher flow, but avoid adding more water than specified as that can degrade strengths & increase shrinkage.

 91 000 74051 SikaRep® Microcrete-4 is a factory-blended, high-performance, non-shrink, cementitious micro-concrete mix. Designed for deep structural repairs in concrete, it flows easily into restricted forms, compensates for shrinkage, develops rapid strength, and bonds well with old concrete. Ideal for repairing damaged beams, slabs, columns, tunnels, basements, and large gapes. 
Key Features & Benefits 
Pourable / pumpable consistency; flows easily without the need for vibration. Dual-stage expansion to compensate for plastic shrinkage and settlement.
 Rapid strength gain: strong early (1-day, 3-day) strengths enabling quicker reinstatement. High ultimate strength with good impact, vibration, chemical resistance; non-corrosive, non-toxic. Contains no added chloride, so safer for reinforced concrete.
 Adjustable consistency by controlling water: you can adjust flow / workability while maintaining properties.
Q1. What is the price per 30 kg bag?Typical posted rates are around 000 per 30 kg bag, depending on Please visit CIVILIZEMARTQ2. How much area / volume will 1 bag cover?Consumption is approximately 1,900 kg of powder per cubic meter of concrete (with water : powder = 0.15). So 30 kg covers ~0.0158 m³ ~ about 15-16 liters volume roughly. Exact depends on depth / thickness. Q3. Can it be pumped?Yes — the product is designed to be pourable/pumpable into restricted formwork without vibration. Q4. Is it safe for reinforced concrete / steel?Yes — it is non-corrosive, contains no added chloride. Q5. What is shelf life & storage?Shelf life is ~6 months from date of production if stored in unopened bags, in dry conditions, at temperature between +5-35 °C. Q6. Can the mix be adjusted for more flow?Yes — by using water-powder ratio within the recommended range (0.14 to 0.16) for higher flow, but avoid adding more water than specified as that can degrade strengths & increase shrinkage.

 91 000 74051 SikaRep® Microcrete-4 is a factory-blended, high-performance, non-shrink, cementitious micro-concrete mix. Designed for deep structural repairs in concrete, it flows easily into restricted forms, compensates for shrinkage, develops rapid strength, and bonds well with old concrete. Ideal for repairing damaged beams, slabs, columns, tunnels, basements, and large gapes. 
Key Features & Benefits 
Pourable / pumpable consistency; flows easily without the need for vibration. Dual-stage expansion to compensate for plastic shrinkage and settlement.
 Rapid strength gain: strong early (1-day, 3-day) strengths enabling quicker reinstatement. High ultimate strength with good impact, vibration, chemical resistance; non-corrosive, non-toxic. Contains no added chloride, so safer for reinforced concrete.
 Adjustable consistency by controlling water: you can adjust flow / workability while maintaining properties.
Q1. What is the price per 30 kg bag?Typical posted rates are around 000 per 30 kg bag, depending on Please visit CIVILIZEMARTQ2. How much area / volume will 1 bag cover?Consumption is approximately 1,900 kg of powder per cubic meter of concrete (with water : powder = 0.15). So 30 kg covers ~0.0158 m³ ~ about 15-16 liters volume roughly. Exact depends on depth / thickness. Q3. Can it be pumped?Yes — the product is designed to be pourable/pumpable into restricted formwork without vibration. Q4. Is it safe for reinforced concrete / steel?Yes — it is non-corrosive, contains no added chloride. Q5. What is shelf life & storage?Shelf life is ~6 months from date of production if stored in unopened bags, in dry conditions, at temperature between +5-35 °C. Q6. Can the mix be adjusted for more flow?Yes — by using water-powder ratio within the recommended range (0.14 to 0.16) for higher flow, but avoid adding more water than specified as that can degrade strengths & increase shrinkage.

 91 000 74051 SikaRep® Microcrete-4 is a factory-blended, high-performance, non-shrink, cementitious micro-concrete mix. Designed for deep structural repairs in concrete, it flows easily into restricted forms, compensates for shrinkage, develops rapid strength, and bonds well with old concrete. Ideal for repairing damaged beams, slabs, columns, tunnels, basements, and large gapes. 
Key Features & Benefits 
Pourable / pumpable consistency; flows easily without the need for vibration. Dual-stage expansion to compensate for plastic shrinkage and settlement.
 Rapid strength gain: strong early (1-day, 3-day) strengths enabling quicker reinstatement. High ultimate strength with good impact, vibration, chemical resistance; non-corrosive, non-toxic. Contains no added chloride, so safer for reinforced concrete.
 Adjustable consistency by controlling water: you can adjust flow / workability while maintaining properties.
Q1. What is the price per 30 kg bag?Typical posted rates are around 000 per 30 kg bag, depending on Please visit CIVILIZEMARTQ2. How much area / volume will 1 bag cover?Consumption is approximately 1,900 kg of powder per cubic meter of concrete (with water : powder = 0.15). So 30 kg covers ~0.0158 m³ ~ about 15-16 liters volume roughly. Exact depends on depth / thickness. Q3. Can it be pumped?Yes — the product is designed to be pourable/pumpable into restricted formwork without vibration. Q4. Is it safe for reinforced concrete / steel?Yes — it is non-corrosive, contains no added chloride. Q5. What is shelf life & storage?Shelf life is ~6 months from date of production if stored in unopened bags, in dry conditions, at temperature between +5-35 °C. Q6. Can the mix be adjusted for more flow?Yes — by using water-powder ratio within the recommended range (0.14 to 0.16) for higher flow, but avoid adding more water than specified as that can degrade strengths & increase shrinkage.

 91 000 74051 SikaRep® Microcrete-4 is a factory-blended, high-performance, non-shrink, cementitious micro-concrete mix. Designed for deep structural repairs in concrete, it flows easily into restricted forms, compensates for shrinkage, develops rapid strength, and bonds well with old concrete. Ideal for repairing damaged beams, slabs, columns, tunnels, basements, and large gapes. 
Key Features & Benefits 
Pourable / pumpable consistency; flows easily without the need for vibration. Dual-stage expansion to compensate for plastic shrinkage and settlement.
 Rapid strength gain: strong early (1-day, 3-day) strengths enabling quicker reinstatement. High ultimate strength with good impact, vibration, chemical resistance; non-corrosive, non-toxic. Contains no added chloride, so safer for reinforced concrete.
 Adjustable consistency by controlling water: you can adjust flow / workability while maintaining properties.
Q1. What is the price per 30 kg bag?Typical posted rates are around 000 per 30 kg bag, depending on Please visit CIVILIZEMARTQ2. How much area / volume will 1 bag cover?Consumption is approximately 1,900 kg of powder per cubic meter of concrete (with water : powder = 0.15). So 30 kg covers ~0.0158 m³ ~ about 15-16 liters volume roughly. Exact depends on depth / thickness. Q3. Can it be pumped?Yes — the product is designed to be pourable/pumpable into restricted formwork without vibration. Q4. Is it safe for reinforced concrete / steel?Yes — it is non-corrosive, contains no added chloride. Q5. What is shelf life & storage?Shelf life is ~6 months from date of production if stored in unopened bags, in dry conditions, at temperature between +5-35 °C. Q6. Can the mix be adjusted for more flow?Yes — by using water-powder ratio within the recommended range (0.14 to 0.16) for higher flow, but avoid adding more water than specified as that can degrade strengths & increase shrinkage.

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop-108 Water Plug IN is a ready-to-use, rapid-setting, waterproof cement mortar designed to stop active water leaks instantly in concrete and masonry. It forms a strong, durable plug even under running water or high leak flow conditions, making it ideal for emergency repairs and plugging applications.
Key Use Cases: leaks through cracks, casting joints, gravel pockets; waterproofing water tanks, basements, sunken pits; sealing drainage outlets; during injection grouting. 
✔ Key Features & AdvantagesHardens within ~2-3 minutes at ~27 °C. Ready-to-use powder—just add water. Non-toxic and chloride-free—safe for potable water structures. Excellent adhesion to concrete, masonry, metals, PVC, HDPE etc. Low exotherm (less heat during curing), similar thermal expansion as concrete.
Q1. What kind of leaks can this stop?It can stop negative‐pressure leaks through cracks, joints, gravel pockets, casting joints etc.—even under running water. Q2. How fast does it set and become effective?At around 27 °C, it begins to harden in ~2-3 minutes. Quick strength gain ensures leak stops fast. Q3. How is the surface prepared before sealing?Clean area—remove loose materials, oil, grease etc. Widen leak point in “dovetail” shape (~20 mm) to allow better bonding. Wet the surface if very dry. Q4. How much material is needed?Depends on volume of leak / cavity. Since setting is very fast, mix small quantities at a time that you can apply immediately. For 1 kg bag, small area patch; for big leaks you may need multiple bags.Q5. Can it handle high pressure or lots of water flow?Yes—but for very high pressures, sometimes drill relief holes around the leak, or using supporting plugs, then apply the mortar. Larger bonding surface helps. Q6. Is it safe for potable water or areas that carry water later?Yes—it’s non-toxic and chloride free. Once cured, it can be used in water tanks, etc. Q7. What’s the price approx for a 5 kg bag?PLEASE VISIT CIVILIZEMART

 91 000 74051 Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.

 91 000 74051 Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.

 91 000 74051 Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.

 91 000 74051 Sika MonoTop®-122 F trowelable mortar is a dual shrinkage compensated, thixotropic high strength formulation for structural concrete repairs. Sika MonoTop®-122 F is suitable for placing in thicknesses of 5mm to 50 mm vertically and 5-15mm overhead.