Civilize Mart

 91 000 74051 Bostik Fix All is a high-performance, ready-to-use premium tile adhesive designed for fixing ceramic tiles, vitrified tiles, natural stones, and other cladding materials on floors and walls. It provides excellent bonding strength, superior flexibility, and long-lasting durability for both interior and exterior applications.

• High Bond Strength for secure tile fixing

• Ready-to-use formula – No mixing required

• Excellent water & weather resistance

• Suitable for bathrooms, kitchens & wet areas

• Non-slip / No sag – Ideal for vertical wall tiling

• Good open time for easy application

• Crack-resistant & durable finish

• Cement plaster

• Concrete

• Block work

• Gypsum boards

• Existing tile-on-tile (with proper surface preparation)

• Ceramic tiles

• Vitrified tiles

• Mosaic tiles

• Natural stones (small to medium size)

• Wall cladding & floor tiling

Approx. 1.5 – 2.5 kg/m² depending on trowel size & substrate condition.

Available in small tubs / buckets (varies by supplier).

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

 91 000 74051 SmartCare CemBoost 200 is an integral liquid waterproofing compound and cement modifier designed to enhance the performance of cement, mortar, plaster, and concrete mixes. It strengthens the mix, increases durability, and provides improved water resistance — making it ideal for both structural waterproofing and enhanced concrete performance. 

• Integral Waterproofing: Reduces water permeability of cement and concrete, protecting structures against moisture ingress. 

• Improves Strength: Enhances compressive strength even beyond standard mix performance.  

• Better Workability: Adds cohesion and plasticizing action to fresh concrete/mortar mixes, making them easier to work with. 

• Controls Shrinkage: Helps resist cracking from drying shrinkage. 

• Compatible: Suitable for concrete, mortar, plaster, brickwork, screeds, and more. 

• Corrosion Resistance: Reduces risk of reinforcement corrosion by limiting water and chloride penetration. 

• Waterproofing water-retaining structures like tanks and sumps. 

• Basements, roofs, and slabs to prevent moisture ingress.  

• Bathroom & wet area waterproofing in plaster or mortar layers. 

• Bricklaying mortar to enhance water resistance and strength. 

• Structural concrete mixes and plasters needing improved durability. 

• Smartcare Cemboost 200 5 L – smaller pack for site use

• 10 L Asian Paints Smartcare Cemboost 200 – medium work projects

• 20 L Asian Paints Smartcare Cemboost 200 – most common contractor size

• Smartcare Cemboost 200 Bulk Pack – larger bulk supply

• 1 Tons 20 L Asian Paints Smartcare Cemboost 200 – for high-volume requirements

1. Mixing: Add the recommended dose of CemBoost 200 into mixing water before adding cement and aggregates.

2. Concrete & Mortar: Use in concrete, plaster, or mortar mixes where enhanced waterproofing and strength are desired. 

3. Curing: Follow standard curing practices after placement to develop full strength and waterproofing benefits. 

•  91 000 74051 TileFixo Royal NT Plus is a polymer-modified cementitious tile adhesive made by UltraTech, designed for fixing large format tiles and natural stones (like marbles, granites, large-size tiles) on floors and walls.

• It’s suitable for both interior and exterior applications, and works on cement-based substrates such as plaster, concrete, screed, cement boards, bricks, etc.

• Ideal for large tiles / slabs / natural stones on walls and floors, for both indoor and outdoor. 

• Also suitable for wet or damp environments, including submerged areas like swimming pools, water tanks, fountains, terraces, balconies — thanks to its water-resistant properties. 

• Works well for tile-on-tile or new tile installations, over cement surfaces. 

• High bond strength & excellent adhesion — ensures tiles/natural stone stay firmly fixed to substrate. 

• Polymer-modified and self-curing — no need for additional curing agents; single component and easy to use. 

• Non-sag / Non-slip & high slip-resistance — prevents sliding of heavy tiles/stones, especially on walls or vertical surfaces. 

• Extended open time — gives enough time to adjust and position large tiles properly before adhesive sets. 

• Versatile substrate compatibility — works on plaster, concrete, screed, cement boards, brick surfaces, etc. 

• Suitable for demanding & heavy-duty use — tile-on-tile, external cladding, natural stone flooring, wall cladding, wet areas etc. 

• Water-to-powder mixing ratio: ~ 24–27% potable water by weight.

• Mix with a mechanical stirrer for 2–3 minutes for a lump-free mix; allow to stand ~2 minutes, then remix before application. 

• Apply using appropriate notched trowel depending on tile size; ensure proper bed thickness.

• Clean surface thoroughly before application — free of dust, oils, laitance etc., for effective bonding. 

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

•  91 000 74051 V-Bond GOLD PLUS is a “single-component thin-bed adhesive / dry-mix mortar” — cement-based and polymer-modified, ready-to-use for tiling jobs.

• It’s classified as a Type-2 / “extra-premium” tile adhesive designed for strong bonding. 

• It’s meant for tiles and stones on floors, walls, countertops, etc — in internal (and often external) surfaces. 

• High bond strength — gives firm adhesion for tiles/stones on different substrates. 

• Flexible & shock/impact resistant — helps handle minor movements or stress without cracking. 

• Water-resistant — suitable for damp or wet areas (bathrooms, kitchens, maybe even pool-sides depending on tile & spec) when used properly.

• Self-curing and easy to use — simpler than traditional cement-sand mortar; less labour-intensive, likely more consistent.

• Helps avoid “hollowness” (tile not sticking well or gaps under tile) — leads to durable, stable tile installation. 

Good for:

• Floor and wall tile installations (ceramic, vitrified, stone, etc.) — in houses, apartments, offices.

• Kitchens, bathrooms, wet areas — due to water-resistance.

• Heavy-duty or high-traffic areas (because of strong bond + shock resistance).

• Renovation or new construction where you want reliable long-lasting tile laying with less risk of tiles loosening or cracking.

• Make sure surface is clean and prepared before applying adhesive.

• Use appropriate water mixing / application instructions (as per manufacturer) — because being “ready to use / single component” doesn’t mean “ignore surface prep.”

• For exterior/wet areas: ensure tiles and grout are suitable for water exposure, and that overall waterproofing is considered — adhesive helps but isn’t complete waterproofing by itself.

•  91 000 74051 V-Bond GOLD PLUS is a “single-component thin-bed adhesive / dry-mix mortar” — cement-based and polymer-modified, ready-to-use for tiling jobs.

• It’s classified as a Type-2 / “extra-premium” tile adhesive designed for strong bonding. 

• It’s meant for tiles and stones on floors, walls, countertops, etc — in internal (and often external) surfaces. 

• High bond strength — gives firm adhesion for tiles/stones on different substrates. 

• Flexible & shock/impact resistant — helps handle minor movements or stress without cracking. 

• Water-resistant — suitable for damp or wet areas (bathrooms, kitchens, maybe even pool-sides depending on tile & spec) when used properly.

• Self-curing and easy to use — simpler than traditional cement-sand mortar; less labour-intensive, likely more consistent.

• Helps avoid “hollowness” (tile not sticking well or gaps under tile) — leads to durable, stable tile installation. 

Good for:

• Floor and wall tile installations (ceramic, vitrified, stone, etc.) — in houses, apartments, offices.

• Kitchens, bathrooms, wet areas — due to water-resistance.

• Heavy-duty or high-traffic areas (because of strong bond + shock resistance).

• Renovation or new construction where you want reliable long-lasting tile laying with less risk of tiles loosening or cracking.

• Make sure surface is clean and prepared before applying adhesive.

• Use appropriate water mixing / application instructions (as per manufacturer) — because being “ready to use / single component” doesn’t mean “ignore surface prep.”

• For exterior/wet areas: ensure tiles and grout are suitable for water exposure, and that overall waterproofing is considered — adhesive helps but isn’t complete waterproofing by itself.

•  91 000 74051 NCL OMNISTIK TE-106 is a cement-based, polymer-modified, single-component thin-bed tile adhesive from NCL Buildtek.

• It comes as a dry-powder blend — you just add the recommended amount of water at site, mix, and apply. No need for traditional cement-sand mixes.

• It’s designed for both floor and wall tiling, and supports a wider variety of tiles including ceramic, vitrified, and some stone tiles.

Note: Exact numbers may slightly vary depending on batch — always check the batch label or official TE-106 datasheet before use.

Best uses:
✔ Standard-size ceramic or vitrified tiles on walls & floors
✔ Interior living spaces, balconies, kitchens, bathrooms
✔ Residential and light commercial applications
✔ New constructions and renovation jobs
✔ Situations needing fast and consistent bonding without manual mortar mixing

Especially good because:

• It’s easy to mix / ready to use — saves labor and time on site

• Gives consistent strength, reduced chances of hollow spots, and good adhesion

• Works on multiple substrates like concrete, plaster, screed, etc.

• Ensure the substrate is clean, level, stable, and free of dust/oil/loose particles.

• Avoid use in continuously wet environments or heavy water exposure areas (like outdoor pool edges) unless paired with proper waterproofing.

• For very large or very heavy stone tiles (marble/granite/slabs) — consider a stronger/high-flex adhesive (e.g., NCL Cerostik TI-103, Tilostik TE-105, or NCL Platinum-grade adhesives).

• Follow proper trowel notch size and full-bed application to eliminate voids under tiles.

•  91 000 74051 NCL Tilostik is a cement-based, polymer-modified thin-bed tile adhesive from NCL Buildtek. 

• It’s distributed as a dry-powder adhesive. On-site you simply add water (single-pack system) and mix — no need for custom cement-sand mixes. 

• It is meant for fixing tiles (ceramic, vitrified, certain stones) and is suitable for both wall and floor applications on leveled, prepared substrates (concrete, screed, cement plaster, etc.). 

• Color / appearance: Grey (or white version depending on supply) dry powder.

• Mixing with water — roughly 25–30% water by weight is recommended for proper consistency. 

• Pot life / working time: ~ 180 minutes after mixing (gives you sufficient time for application) 

• Bed thickness (adhesive layer): minimum ~ 3 mm, can vary depending on tile size and job requirements. 

• Open time (time you have to adjust tiles after placing adhesive): > 20 minutes (at ~25 °C) — gives flexibility during installation. 

• Coverage (approx): For a 3 mm bed thickness — stated as > 3 sqft per kg (so a 20 kg bag covers significantly, though actual depends on trowel size, tile size, substrate condition). Time to traffic (after which you can walk / grout / use floor): ~ 24 hours after laying. 

• Because it’s polymer-modified and premixed, it gives a strong, reliable bond — better and more consistent than traditional cement-sand mortar mixing onsite. 

• It helps avoid “hollowness” (voids or air-gaps under tiles) even under stone or compact tiles, giving a solid, stable finish for floors.

• Versatile — usable for interior and exterior applications, on walls and floors, on various cementitious substrates (plaster, screed, concrete) — good for residential and commercial / renovation jobs. 

• Because of consistent factory-prepared mix, it reduces labor, wastage, and variation compared to manual mortar mixes — convenient for faster tile installation. 

• The substrate (floor/wall surface) must be clean, level, stable, free of dust/oil/loose particles for good adhesion (as with any tile adhesive).

• While advertised for “tiles and stones”, performance will depend on tile/stone type — make sure tile porosity / size / weight is within what Tilostik is suitable for (moderate to normal-size tiles, not extremely heavy slabs).

• Use proper trowel notch size (as recommended by installer) and apply adhesive evenly for full bed coverage to avoid weak bonding or hollow spots.

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

 91 000 74051 Tile adhesives are ready-mix / cement-based / polymer-modified materials used to fix tiles on floors and walls.
They give strong bonding, better finish, and longer life compared to traditional cement-sand fixing.

• Cement + graded sand + additives

• Most commonly used

• Best for: Ceramic tiles, vitrified tiles (small–medium size)

Usage Areas:
✔ Floors
✔ Walls
✔ Residential & commercial

Popular Brands / Products:

• Asian Paints SmartCare Tile Adhesive

• Dr Fixit Fixitile

• MYK Laticrete 335 / 315

• UltraTech TileFixo

• Ardex Endura

• NCL Omnistick

• Higher strength & flexibility

• Good for heavy tiles

Best for:
✔ Vitrified tiles
✔ Large format tiles

Brands:

• MYK Laticrete 335 / 335 Plus

• UltraTech TileFixo Plus

• Ardex Endura Gold Star

• Can absorb slight movement

• Crack-resistant

Best for:
✔ Exterior walls
✔ Terraces
✔ Heated floors

Brands:

• MYK Laticrete 335 Flex

• Ardex Endura Platinum

• NCL LFT Adhesive

• Specially designed for big size tiles & slabs

Best for:
✔ 600×1200 mm & above
✔ Slabs & granite

Brands:

• MYK Laticrete 4XLT

• NCL LFT Adhesive

• Ardex Endura LFT

• Two-component system

• Chemical & water resistant

Best for:
✔ Swimming pools
✔ Industrial areas
✔ Labs & hospitals

Brands:

• MYK Latapoxy

• Ardex Epoxy Adhesive

✔ Strong bonding
✔ Less material wastage
✔ Faster work
✔ Better finish
✔ Suitable for modern tiles

•  91 000 74051 VEPOXY SP GOLD is a two-component (resin + hardener + filler-powder) epoxy tile grout for grouting tile joints — i.e. filling the gaps between tiles, not for sticking tiles to floor/wall. 

• It’s meant for ceramic tiles, vitrified tiles, natural stone (marble/granite), glass-mosaic, and other tile/stone surfaces.

• Target use: areas where hygiene, water-resistance, stain-resistance and durability matter — kitchens, bathrooms, swimming pools, hospitals, restaurants, heavy-traffic floors and wet/water-exposed surfaces. 

•  91 000 74051 TileFixo PU 2K is a two-component, polyurethane-based tile & stone adhesive from the TileFixo range. 

• Unlike typical cement-based adhesives, PU 2K is formulated to bond tiles/stones over a broad variety of substrates — including cementitious surfaces, metals, glass, plywood/wood, drywall boards, existing tiles/stones, epoxy/PU surfaces, etc.

• It is suitable for both interior and exterior applications, and for floors and walls — making it one of the most versatile adhesives in the TileFixo lineup.

• Fixing all types of tiles and stones, including engineered stones and metal-backed tiles. 

• Tile or stone installation over non-standard substrates — e.g. metal, glass, plywood, drywall, existing tile/stone, or PU/epoxy surfaces — where cement-based adhesives may not perform well. 

• Both flooring and wall cladding, inside or outside, making it suitable for versatile tile-on-tile or renovation work where substrate conditions vary. 

• Two-component polyurethane adhesive — provides high strength bonding and better substrate compatibility than standard cement adhesives. 

• Wide substrate compatibility — works not only on cementitious surfaces but also on metal, glass, wood/plywood, drywall boards, epoxy/PU surfaces, existing tiles/stones, etc. 

• Suitable for interior and exterior applications, for floors and walls — offers flexibility for different parts of a house or building. 

• Can fix all tile/stone types — from ceramic/vitrified to natural stones and engineered stones, giving broad material flexibility. 

Use TileFixo PU 2K when:

• You are laying tiles/stones over non-cement or unconventional substrates: metal frames, plywood under-floors, drywall partitions, old tiles, glass, etc.

• The project involves renovation or tile-on-tile work where existing floor or wall tiles need to be covered.

• You need a strong, durable bond for heavy tiles/stone or engineered stone — especially when substrate quality or type is uncertain.

• You require exterior or interior tiling with flexibility in substrate and tile material.

• As a two-component polyurethane adhesive, application needs correct mixing and handling — it is not a simple “mix-with-water” like cement-based adhesives. 

• Ensure substrate is clean, dry, and properly prepared — PU adhesives generally require good substrate preparation for reliable adhesion, especially on non-traditional surfaces.

• Because it’s more advanced than basic adhesives, it might be more expensive — but that’s the tradeoff for versatility and stronger bonding across varied conditions.

 91 000 74051 SmartCare Tile Adhesive (Normal) is a cement-based, polymer-modified tile adhesive designed for fixing ceramic tiles, vitrified tiles (small size), and natural stones on internal wall & floor surfaces. It offers good bonding strength, easy workability, and consistent performance for regular tile-laying applications.

• Polymer Modified: Improves adhesion and flexibility.

• High Bond Strength: Ensures strong grip between tiles and substrate.

• Best for Normal Use: Suitable for ceramic tiles & small-size vitrified tiles.

• Easy to Apply: Smooth mixing, good open time, and simple trowel application.

• Slip Resistant: Prevents tile slipping on vertical surfaces.

• Water-Resistant: Suitable for wet areas like kitchens and bathrooms.

• Internal walls & floors

• Ceramic tiles

• Small-format vitrified tiles

• Natural stones (lightweight)

• Bathrooms, kitchens, living rooms

• Plastered surfaces, concrete surfaces

• Mixing Ratio: ~ 20–25% water

• Pot Life: 3–4 hours

• Open Time: 20–25 minutes

• Coverage: 3–4 kg/m² depending on trowel notch size

• Curing: Light foot traffic after 24 hours

1. Surface Preparation: Clean and level the substrate.

2. Mixing: Add powder into clean water and mix to a smooth paste.

3. Troweling: Apply adhesive using a notched trowel.

4. Tile Laying: Press tiles firmly within the open time.

5. Curing: Allow to set and avoid movement for at least 24 hours.

• Available in 20 kg bag (commonly)

 91 000 74051 SmartCare Tile Adhesive (Tile-on-Tile) is a high-performance polymer-modified tile adhesive specially designed for fixing new tiles over existing old tiles without removing the original layer. It provides excellent bonding strength, flexibility, and durability for challenging tile-on-tile installations on floors and walls.

• Tile-on-Tile Technology: Bonds strongly with old ceramic/vitrified tile surfaces.

• High Polymer Modification: Ensures superior adhesion and long-lasting performance.

• No Tile Removal Needed: Saves time, labor cost, and reduces noise/dust.

• Water & Heat Resistant: Suitable for kitchens, bathrooms, and heavy-use areas.

• Non-Shrink Formula: Prevents hollow sound and debonding.

• Slip Resistant: Ideal for vertical tile-on-tile applications.

• Good Workability: Smooth spreading and extended open time.

• Tile on existing tile (ceramic or vitrified)

• Internal walls & floors

• Renovation works without removing old tiles

• Residential & commercial applications

• Shower areas, kitchens, corridors, balconies

• Water Mixing Ratio: 22–25%

• Pot Life: 3–4 hours

• Open Time: 25–30 minutes

• Coverage: ~3.5–4.5 kg/m² (depends on trowel notch)

• Foot Traffic: After 24 hours

• Full Strength Cure: 7 days

1. Clean Old Tiles: Remove dust, oil, fungus; scrub using a tile cleaner if needed.

2. Surface Preparation: Ensure old tiles are sound and not hollow.

3. Apply Primer/Slurry Coat: A bonding agent may be recommended for glossy surfaces.

4. Mix Adhesive: Add powder to water and mix thoroughly to a lump-free paste.

5. Trowel Application: Spread adhesive with a notched trowel.

6. Fix New Tiles: Press firmly within the open time.

7. Curing: Avoid traffic for 24 hours.

• Usually available in 20 kg bags.

 91 000 74051 SmartCare Tile Adhesive (Normal) is a cement-based, polymer-modified tile adhesive designed for fixing ceramic tiles, vitrified tiles (small size), and natural stones on internal wall & floor surfaces. It offers good bonding strength, easy workability, and consistent performance for regular tile-laying applications.

• Polymer Modified: Improves adhesion and flexibility.

• High Bond Strength: Ensures strong grip between tiles and substrate.

• Best for Normal Use: Suitable for ceramic tiles & small-size vitrified tiles.

• Easy to Apply: Smooth mixing, good open time, and simple trowel application.

• Slip Resistant: Prevents tile slipping on vertical surfaces.

• Water-Resistant: Suitable for wet areas like kitchens and bathrooms.

• Internal walls & floors

• Ceramic tiles

• Small-format vitrified tiles

• Natural stones (lightweight)

• Bathrooms, kitchens, living rooms

• Plastered surfaces, concrete surfaces

• Mixing Ratio: ~ 20–25% water

• Pot Life: 3–4 hours

• Open Time: 20–25 minutes

• Coverage: 3–4 kg/m² depending on trowel notch size

• Curing: Light foot traffic after 24 hours

1. Surface Preparation: Clean and level the substrate.

2. Mixing: Add powder into clean water and mix to a smooth paste.

3. Troweling: Apply adhesive using a notched trowel.

4. Tile Laying: Press tiles firmly within the open time.

5. Curing: Allow to set and avoid movement for at least 24 hours.

• Available in 20 kg bag (commonly)

 91 000 74051 SmartCare EZY White Tile Adhesive is a premium white cement–based, polymer-modified tile adhesive designed for fixing ceramic tiles, vitrified tiles (small to medium size), glass mosaics, and natural stones on internal walls & floors.
Its white formula prevents staining, making it ideal for light-coloured stones and decorative tiles.

• White Cement Based: Prevents staining of light-coloured stones, glass mosaics & designer tiles.

• Easy to Use (EZY): Smooth, lump-free mixing and effortless trowelling.

• Strong Bonding: Polymer-modified for durable adhesion on walls and floors.

• Stain-Free Finish: Ideal for translucent stones & glass tiles.

• Slip Resistant: Suitable for vertical wall mounting.

• Water-Resistant: Suitable for bathrooms, kitchens & wet areas.

• Good Open Time: Allows easy tile adjustment during fixing.

• Ceramic tiles (wall & floor)

• Small/medium vitrified tiles

• White/Light stones (marble, limestone, kota, etc.)

• Glass mosaics & designer tiles

• Bathrooms, kitchens & living rooms

• Internal walls & floors

• Renovation work over levelled surfaces

• Colour: White

• Mixing Ratio: 22–25% water

• Pot Life: 3–4 hours

• Open Time: 20–25 minutes

• Coverage: 3–4 kg/m² (varies with notch size)

• Foot Traffic: After 24 hours

• Full Cure: 7 days

1. Surface Preparation: Clean, level and free from dust or grease.

2. Mixing: Add adhesive powder to water and mix thoroughly.

3. Trowel Application: Use a notched trowel to spread uniformly.

4. Tile Fixing: Press tiles firmly into the adhesive bed.

5. Back Buttering: Recommended for medium-size vitrified tiles.

6. Curing: Avoid traffic & water contact for 24 hours.

• Available in 20 kg white bags.

 91 000 74051 SmartCare White Multipurpose Tile Adhesive is a high-quality, polymer-modified white adhesive specially designed for fixing mosaics, glass tiles, natural stones, and designer tiles on internal and external surfaces.
The white base prevents tile staining and enhances the appearance of translucent stones and mosaics.

• White Cement Based: Prevents discoloration of glass, marble, stone, and mosaics.

• Multipurpose Use: Suitable for ceramic, vitrified, mosaic, glass mosaic, marble & natural stone.

• Non-Shrink Formula: Reduces hollowness & ensures strong bonding.

• High Adhesion Strength: Polymer-modified for superior grip.

• Stain-Free Installation: Ideal for light-coloured stones and transparent tiles.

• Water & Heat Resistant: Suitable for wet areas and kitchens.

• Smooth Workability: Easy to mix and apply.

• Glass mosaics & designer tiles

• Italian marble, Kota, sandstone, limestone

• Ceramic and vitrified tiles

• Elevation tiles & external cladding

• Bathrooms, kitchens, swimming pools

• Internal and external walls/floors

• Translucent and light-coloured stones

• Colour: White

• Mixing Ratio: 22–25% water

• Open Time: 25–30 minutes

• Pot Life: 3–4 hours

• Coverage: 3–4 kg/m² (depends on trowel size)

• Foot Traffic: After 24 hours

1. Prep Surface: Ensure surface is clean, dry, and sound.

2. Mix Powder: Add into water and mix to smooth paste.

3. Apply Adhesive: Spread using a notched trowel.

4. Back Buttering: Recommended for large tiles & stones.

5. Fix Tiles: Press firmly to avoid air gaps.

6. Cure: Leave for 24 hours before use.

• Available in 20 kg white bags.

 91 000 74051 SmartCare Tile Adhesive for Stone & Heavy Tiles is a high-strength, polymer-modified cementitious adhesive specially designed for fixing large format tiles, heavy stones, marble, granite, and vitrified slabs on internal & external surfaces.
It provides superior adhesion, high load-bearing capacity, and excellent slip resistance for demanding installations.

• High Bond Strength: Ideal for heavy stones & large-format tiles.

• Polymer Enriched: Ensures excellent flexibility and durability.

• Anti-Slip Formula: Prevents sliding during vertical installation.

• High Load-Bearing Capacity: Supports weight of granite, marble & large tiles.

• Water & Weather Resistant: Suitable for internal/external applications.

• Extended Open Time: Allows easy adjustments during fixing.

• Crack-Free Performance: Non-shrink, reduces hollowness under tiles.

• Marble, granite, natural stones

• Heavy ceramic/vitrified tiles

• Large format tiles (600×600, 800×1600, 1200×2400 mm, etc.)

• Internal & external floors and walls

• Bathrooms, balconies, terraces

• Commercial areas with heavy foot traffic

• Cladding works

• Mixing Ratio: 22–25% clean water

• Open Time: 25–30 minutes

• Pot Life: 3–4 hours

• Coverage: 4–5 kg/m² depending on tile size & trowel notch

• Foot Traffic: After 24 hours

• Full Cure: 7 days

1. Surface Preparation: Clean, level, and remove dust or loose particles.

2. Mix Adhesive: Add powder to water and mix to a smooth paste.

3. Back Buttering: Mandatory for heavy stone & large tiles.

4. Apply Adhesive: Use a notched trowel for uniform bed thickness.

5. Fix Tiles/Stones: Press firmly to remove air gaps.

6. Curing: Avoid foot traffic for 24 hours.

• Available in 20 kg bags.

 91 000 74051 SmartCare Tile Adhesive (Normal) is a cement-based, polymer-modified tile adhesive designed for fixing ceramic tiles, vitrified tiles (small size), and natural stones on internal wall & floor surfaces. It offers good bonding strength, easy workability, and consistent performance for regular tile-laying applications.

• Polymer Modified: Improves adhesion and flexibility.

• High Bond Strength: Ensures strong grip between tiles and substrate.

• Best for Normal Use: Suitable for ceramic tiles & small-size vitrified tiles.

• Easy to Apply: Smooth mixing, good open time, and simple trowel application.

• Slip Resistant: Prevents tile slipping on vertical surfaces.

• Water-Resistant: Suitable for wet areas like kitchens and bathrooms.

• Internal walls & floors

• Ceramic tiles

• Small-format vitrified tiles

• Natural stones (lightweight)

• Bathrooms, kitchens, living rooms

• Plastered surfaces, concrete surfaces

• Mixing Ratio: ~ 20–25% water

• Pot Life: 3–4 hours

• Open Time: 20–25 minutes

• Coverage: 3–4 kg/m² depending on trowel notch size

• Curing: Light foot traffic after 24 hours

1. Surface Preparation: Clean and level the substrate.

2. Mixing: Add powder into clean water and mix to a smooth paste.

3. Troweling: Apply adhesive using a notched trowel.

4. Tile Laying: Press tiles firmly within the open time.

5. Curing: Allow to set and avoid movement for at least 24 hours.

• Available in 20 kg bag (commonly)

 91 000 74051 SmartCare Block Jointing Mortar is a ready-to-use cement-based mortar specially formulated for joining and bedding masonry blocks such as AAC blocks, concrete blocks, fly ash bricks, and similar materials. It is designed for ease of use, good adhesion, and improved structural integrity in wall construction.

• Ready-to-Use Cement Mortar: Factory-blended mix, requiring only water on site for preparation. 

• Non-Shrink & Self-Curing: Reduces cracking and eliminates the need for external curing once mixed. 

• Excellent Adhesion: Provides strong bonding between block courses for durable walls. 

• Flexible: Can accommodate slight movement or thermal expansion without cracking. 

• Fast & Easy Application: Smooth consistency helps quick laying of blocks with minimal effort.

• Jointing of AAC blocks, concrete blocks & fly-ash bricks in masonry work.Internal and external brick/block wall construction. 

• Suitable for load-bearing and non–load-bearing walls. 

• Residential and commercial building work.

• Appearance: Grey powder. 

• Mixing: Add approximately 25–27 % water by weight to the powder and mix to a smooth paste.

• Coverage: Around 3–4 kg per sq m at ~3 mm thickness (approx.). 

• Pot Life: Several hours (depending on conditions) allowing adequate working time. 

1. Surface Preparation: Ensure blocks are clean, free of dust, oil, and loose particles before laying. 

2. Mixing: Place clean water in a container and gradually add the mortar powder while mixing to a smooth, lump-free consistency. 

3. Masonry Application: Spread a uniform layer of mortar on block faces and joints, then place the next block, pressing to achieve alignment and plumb walls.Finishing: Remove excess mortar and ensure joints are tight and compact.

• Commonly supplied in 40 kg bags.

SmartCare Block Jointing Mortar is a ready-mixed, self-curing, non-shrink mortar for block laying and jointing in masonry construction. It simplifies block work, ensures strong bonding, and reduces cracking due to shrinkage or moisture loss.

 91 000 74051 Bostik Fix All is a high-performance, ready-to-use premium tile adhesive designed for fixing ceramic tiles, vitrified tiles, natural stones, and other cladding materials on floors and walls. It provides excellent bonding strength, superior flexibility, and long-lasting durability for both interior and exterior applications.

• High Bond Strength for secure tile fixing

• Ready-to-use formula – No mixing required

• Excellent water & weather resistance

• Suitable for bathrooms, kitchens & wet areas

• Non-slip / No sag – Ideal for vertical wall tiling

• Good open time for easy application

• Crack-resistant & durable finish

• Cement plaster

• Concrete

• Block work

• Gypsum boards

• Existing tile-on-tile (with proper surface preparation)

• Ceramic tiles

• Vitrified tiles

• Mosaic tiles

• Natural stones (small to medium size)

• Wall cladding & floor tiling

Approx. 1.5 – 2.5 kg/m² depending on trowel size & substrate condition.

Available in small tubs / buckets (varies by supplier).

 91 000 74051 SmartCare EZY White Tile Adhesive is a premium white cement–based, polymer-modified tile adhesive designed for fixing ceramic tiles, vitrified tiles (small to medium size), glass mosaics, and natural stones on internal walls & floors.
Its white formula prevents staining, making it ideal for light-coloured stones and decorative tiles.

• White Cement Based: Prevents staining of light-coloured stones, glass mosaics & designer tiles.

• Easy to Use (EZY): Smooth, lump-free mixing and effortless trowelling.

• Strong Bonding: Polymer-modified for durable adhesion on walls and floors.

• Stain-Free Finish: Ideal for translucent stones & glass tiles.

• Slip Resistant: Suitable for vertical wall mounting.

• Water-Resistant: Suitable for bathrooms, kitchens & wet areas.

• Good Open Time: Allows easy tile adjustment during fixing.

• Ceramic tiles (wall & floor)

• Small/medium vitrified tiles

• White/Light stones (marble, limestone, kota, etc.)

• Glass mosaics & designer tiles

• Bathrooms, kitchens & living rooms

• Internal walls & floors

• Renovation work over levelled surfaces

• Colour: White

• Mixing Ratio: 22–25% water

• Pot Life: 3–4 hours

• Open Time: 20–25 minutes

• Coverage: 3–4 kg/m² (varies with notch size)

• Foot Traffic: After 24 hours

• Full Cure: 7 days

1. Surface Preparation: Clean, level and free from dust or grease.

2. Mixing: Add adhesive powder to water and mix thoroughly.

3. Trowel Application: Use a notched trowel to spread uniformly.

4. Tile Fixing: Press tiles firmly into the adhesive bed.

5. Back Buttering: Recommended for medium-size vitrified tiles.

6. Curing: Avoid traffic & water contact for 24 hours.

• Available in 20 kg white bags.

 91 000 74051 SmartCare Tile Adhesive (Tile-on-Tile) is a high-performance polymer-modified tile adhesive specially designed for fixing new tiles over existing old tiles without removing the original layer. It provides excellent bonding strength, flexibility, and durability for challenging tile-on-tile installations on floors and walls.

• Tile-on-Tile Technology: Bonds strongly with old ceramic/vitrified tile surfaces.

• High Polymer Modification: Ensures superior adhesion and long-lasting performance.

• No Tile Removal Needed: Saves time, labor cost, and reduces noise/dust.

• Water & Heat Resistant: Suitable for kitchens, bathrooms, and heavy-use areas.

• Non-Shrink Formula: Prevents hollow sound and debonding.

• Slip Resistant: Ideal for vertical tile-on-tile applications.

• Good Workability: Smooth spreading and extended open time.

• Tile on existing tile (ceramic or vitrified)

• Internal walls & floors

• Renovation works without removing old tiles

• Residential & commercial applications

• Shower areas, kitchens, corridors, balconies

• Water Mixing Ratio: 22–25%

• Pot Life: 3–4 hours

• Open Time: 25–30 minutes

• Coverage: ~3.5–4.5 kg/m² (depends on trowel notch)

• Foot Traffic: After 24 hours

• Full Strength Cure: 7 days

1. Clean Old Tiles: Remove dust, oil, fungus; scrub using a tile cleaner if needed.

2. Surface Preparation: Ensure old tiles are sound and not hollow.

3. Apply Primer/Slurry Coat: A bonding agent may be recommended for glossy surfaces.

4. Mix Adhesive: Add powder to water and mix thoroughly to a lump-free paste.

5. Trowel Application: Spread adhesive with a notched trowel.

6. Fix New Tiles: Press firmly within the open time.

7. Curing: Avoid traffic for 24 hours.

• Usually available in 20 kg bags.

 91 000 74051 SmartCare Block Jointing Mortar is a ready-to-use cement-based mortar specially formulated for joining and bedding masonry blocks such as AAC blocks, concrete blocks, fly ash bricks, and similar materials. It is designed for ease of use, good adhesion, and improved structural integrity in wall construction.

• Ready-to-Use Cement Mortar: Factory-blended mix, requiring only water on site for preparation. 

• Non-Shrink & Self-Curing: Reduces cracking and eliminates the need for external curing once mixed. 

• Excellent Adhesion: Provides strong bonding between block courses for durable walls. 

• Flexible: Can accommodate slight movement or thermal expansion without cracking. 

• Fast & Easy Application: Smooth consistency helps quick laying of blocks with minimal effort.

• Jointing of AAC blocks, concrete blocks & fly-ash bricks in masonry work.Internal and external brick/block wall construction. 

• Suitable for load-bearing and non–load-bearing walls. 

• Residential and commercial building work.

• Appearance: Grey powder. 

• Mixing: Add approximately 25–27 % water by weight to the powder and mix to a smooth paste.

• Coverage: Around 3–4 kg per sq m at ~3 mm thickness (approx.). 

• Pot Life: Several hours (depending on conditions) allowing adequate working time. 

1. Surface Preparation: Ensure blocks are clean, free of dust, oil, and loose particles before laying. 

2. Mixing: Place clean water in a container and gradually add the mortar powder while mixing to a smooth, lump-free consistency. 

3. Masonry Application: Spread a uniform layer of mortar on block faces and joints, then place the next block, pressing to achieve alignment and plumb walls.Finishing: Remove excess mortar and ensure joints are tight and compact.

• Commonly supplied in 40 kg bags.

SmartCare Block Jointing Mortar is a ready-mixed, self-curing, non-shrink mortar for block laying and jointing in masonry construction. It simplifies block work, ensures strong bonding, and reduces cracking due to shrinkage or moisture loss.

  91 000 74051 SmartCare Tile Bonder is a cement-additive bonding agent from Asian Paints designed to improve adhesion and performance of cementitious mixes such as tile adhesives, mortars, and plasters. It acts as a bond coat between old and new surfaces, ensuring stronger and longer-lasting tile fixing.

• Enhances Adhesion: Improves bond strength between tile adhesive/cement mixes and substrate. 

• Better Water Resistance: Helps reduce water absorption into the mortar or adhesive bed.

• Improves Workability: Makes cement mixes more cohesive and easier to use. 

• Stronger Finish: Helps minimise cracking and improves compressive strength of mortar. 

• Bond coat for cement or plaster on concrete and masonry surfaces before tile fixing. 

• Enhancing tile adhesive performance — particularly with heavy tiles and stones. 

• Used with cement-based mortars for improved strength and adhesion.

1. Add Tile Bonder to Mixing Water: Use it together with water when preparing cementitious adhesive/mortar mix. Mix Thoroughly: Ensure a uniform, lump-free cement mixture. 

2. Apply Adhesive/Mortar: Spread the prepared mix as usual for tile fixing. 

(Note: Exact mix ratios and application method vary by project — always refer to the product datasheet or technical guidance.) 

• Typically available in small liquid packs, e.g., ~0.5 L bottles — suitable for site-to-site use. 

SmartCare Tile Bonder is a liquid bonding agent for cement and tile adhesive mixes that enhances adhesion, water resistance, and performance of tile and stone installations — especially when bonding to challenging or previously cured surfaces.

 91 000 74051 SmartCare RepairMax 200 is a high-performance, SBR (Styrene-Butadiene Rubber)-based repair and waterproofing compound from Asian Paints SmartCare range. It is designed to enhance bond strength, flexibility, and water resistance in cementitious mixes — ideal for repair, bonding, and waterproofing applications. 

• Advanced SBR Technology: Improves adhesion between new and old concrete/mortar surfaces. 

• Excellent Bond Strength: Helps strongly bond fresh mortar to existing concrete, plaster, or masonry.

• Enhanced Flexibility: Reduces cracking and shrinkage in repaired surfaces. 

• Water Resistance: Improves waterproofing of cement/sand plaster and repair mortar. Durable: Helps improve durability and longevity of repair work. 

• Concrete Repair: Patching spalled concrete floors, slabs, beams, and chajjas.

• Bonding New to Old Concrete: Enhances adhesion when laying fresh concrete/mortar over aged surfaces. Waterproofing: Can be used in waterproof plaster or mixed with cement for toilets, bathrooms, balconies, and small terraces.

• Tile Fixing & Plastering: Improves bond and performance of tile adhesive and plaster mixes.

1. Surface Prep: Clean surface of dust, oil, loose particles, and weak concrete.

2. Mixing: Add SmartCare RepairMax 200 to mixing water before adding cement and sand; mix thoroughly.

3. Application: Apply mortar/repair mix to the prepared surface.

4. Curing: Allow sufficient curing time as per standard cementitious application practices.

(Exact mix ratios and methods may vary by project; always refer to the product datasheet/technical instructions.)

• 1 L: Handy pack for small repairs — e.g., patching and small waterproofing tasks.

• 5 L: Ideal for moderate repair and waterproofing work.

• 20 L: Best for larger repair and surface treatment applications.