Civilize Mart

 91 000 74051 LATICRETE® 315 PLUS is a high-performance, single-component, polymer-modified cementitious adhesive designed for bonding ceramic tiles, vitrified tiles, precast terrazzo, and natural stone on both floors and walls. It offers excellent workability and extended open time, making it ideal for professional installations where precision and flexibility are important. The adhesive can be mixed with either clean water or a latex admixture (such as LATICRETE 3701) for enhanced performance and strength.

It works well on a variety of cement-based substrates—such as concrete, concrete masonry, cement plaster, mortar beds, and even existing tile surfaces (after proper surface preparation). LATICRETE 315 PLUS supports thin-bed installation methods and can handle a maximum bed thickness of up to 12 mm. It is available in grey and white variants. 

Key Features & Benefits:

• Easy to Use: Just add water for mixing — no multi-part systems or complex preparation required. 

• Extended Open Time: Provides a long pot life (up to ~3 hours) which gives installers more time to adjust tiles and ensures proper setting. 

• Non-Sag: Designed for vertical (wall) applications without sagging, ensuring tiles stay in place perfectly. 

• High Bond Strength: Exceeds the shear bond strength requirements of ANSI A118.4 and meets IS 15477:2019 Type 2 T standards. 

• Flexible & Strong: The polymer-modified formula provides good flexibility and impact resistance; can be fortified with a latex admixture (LATICRETE 3701) for even better performance, especially in exterior or demanding applications. 

• Substrate Compatibility: Bonds to a wide range of surfaces — concrete, brick masonry, plaster, mortar beds, existing tiles, etc. 

• Very Economical Coverage: Around 55–60 sq ft per 20 kg bag (with ~3 mm bed thickness, using a 6 × 6 mm notched trowel). 

• Certifications & Standards: Complies with EN / ISO as a C2TE adhesive. 

• Bed Thickness Flexibility: Can be applied up to 12 mm bed depth, giving room for uneven substrates.

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

•  91 000 74051 V-Bond GOLD PLUS is a “single-component thin-bed adhesive / dry-mix mortar” — cement-based and polymer-modified, ready-to-use for tiling jobs.

• It’s classified as a Type-2 / “extra-premium” tile adhesive designed for strong bonding. 

• It’s meant for tiles and stones on floors, walls, countertops, etc — in internal (and often external) surfaces. 

• High bond strength — gives firm adhesion for tiles/stones on different substrates. 

• Flexible & shock/impact resistant — helps handle minor movements or stress without cracking. 

• Water-resistant — suitable for damp or wet areas (bathrooms, kitchens, maybe even pool-sides depending on tile & spec) when used properly.

• Self-curing and easy to use — simpler than traditional cement-sand mortar; less labour-intensive, likely more consistent.

• Helps avoid “hollowness” (tile not sticking well or gaps under tile) — leads to durable, stable tile installation. 

Good for:

• Floor and wall tile installations (ceramic, vitrified, stone, etc.) — in houses, apartments, offices.

• Kitchens, bathrooms, wet areas — due to water-resistance.

• Heavy-duty or high-traffic areas (because of strong bond + shock resistance).

• Renovation or new construction where you want reliable long-lasting tile laying with less risk of tiles loosening or cracking.

• Make sure surface is clean and prepared before applying adhesive.

• Use appropriate water mixing / application instructions (as per manufacturer) — because being “ready to use / single component” doesn’t mean “ignore surface prep.”

• For exterior/wet areas: ensure tiles and grout are suitable for water exposure, and that overall waterproofing is considered — adhesive helps but isn’t complete waterproofing by itself.

•  91 000 74051 This is a polymer-modified, single-component thin-set tile adhesive — just add water to use. 

• It is designed primarily for interior floors and walls (dry areas), but can also be used for exterior floors if mixed with a special admixture (for enhanced performance).

• Easy to use — just mix with water (no complex preparations).

• Suitable for small to medium tiles (ceramic, vitrified) and small-format natural stone. Does well on cementitious surfaces (concrete, plaster, mortar bed, brick masonry, etc.). 

• Strong adhesion — meets standards like ANSI A118.1T, EN 12004 / ISO 13007 (classified C1T), and IS 15477:2019 (Type 1T). 

• Economical & smooth consistency — because it’s single-component and just water-mixed, it’s cost-effective and easy for tilers to handle. 

• Works on a variety of substrates — concrete, cement mortar beds, plaster, brick masonry, existing tiles/stone (with proper surface prep). 

• Interior floor and wall tiling in homes, apartments, offices — kitchens, bedrooms, living rooms. 

• Small- to medium-sized ceramic / vitrified tile installations

• Cement mortar bed floors, cement plaster walls, concrete surfaces

• Re-tiling over existing tiles or stones (with proper surface prep or with admixture if existing substrate is smooth) 

• Available in 20 kg and 50 kg bags. 

• Coverage (approx): 55–60 sq.ft per 20 kg bag when applied with 6 mm × 6 mm square-notched trowel at a 3 mm bed thickness. 

• Compatible with both grey and white tile adhesives (depending on tile/stone and aesthetic requirements). 

If you want — I can draft 2 versions of this description for you:

1. A short marketing-style blurb (for catalogue or brochure)

2. A detailed specification sheet (for technical document or client use)

•  91 000 74051 PUA 212® is a two component, modified Polyurethane Adhesive designed for the installation of ceramic tile, vitrified tile, metal tile, glass tile, agglomerates, glass mosaic tile and natural stone on any substrate. It is highly elastic, thixotropic and suitable to lay water sensitive tiles & stones on highly expandable, deformable, absorbent and non-absorbent substrates.

• 91 000 74051 It’s a polymer-modified tile adhesive (cementitious mortar), designed to fix tiles or natural stone on floors and walls — both interior and exterior. 

• It’s especially suited for large-format tiles, heavy tiles, porcelain, natural stone, and even tile-on-tile applications. 

• Highly deformable / flexible: can absorb structural movements or thermal expansions without cracking — useful in buildings where there may be shifts or vibrations. 

• Strong bond strength: good shear and tensile adhesion, ensuring tiles stay fixed firmly even on demanding surfaces. 

• Versatile surfaces: works over concrete, cement mortar, plaster, existing tile/stone surfaces, etc. Thin-bed to medium-bed applications: you can apply from thin to modest bed thickness (typical up to ~15 mm). 

• Usable in wet areas: suitable for bathrooms, balconies, even swimming-pool areas (for appropriate tiles/stones), since it has good water- and moisture-resistance once cured.

• Laying ceramic, vitrified, or porcelain tiles — on floors or walls.

• Installing natural stone tiles or large-format tiles (where regular thin-set mortars may crack).

• Renovation work where you may want to tile over existing tiles or stones.

• Wet-area flooring/walls (bathrooms, balconies, terraces) or high-traffic areas (lobbies, kitchens, external facades) — because of its strong adhesion and flexibility

•  91 000 74051 civilizemart 226 Thick Bed Mortar is a factory-prepared mortar mix made from carefully selected raw materials: Portland cement and graded aggregates (sand). 

• It’s designed to be used (often with a “latex admix”, e.g. LATICRETE 3642 Latex or 3701 Mortar Admix) to create a polymer-fortified cement mortar for high-strength, durable applications. 

This mortar is suitable for a variety of applications: 

• Creating traditional thick cement mortar beds (floors, screeds) under tiles, stone, terrazzo, etc. 

• Cement plasters and concrete repairs (walls, floors, masonry) — interior or exterior. 

• Suitable over substrates like concrete, concrete masonry, brick masonry, cement mortar beds, backer boards (depending on installation), for tile/stone/terrazzo installation. 

• Can be used in wet areas or even submerged applications (e.g. pool interiors), if mixed with the proper latex admix. 

• Premixed — you don’t need to blend sand and cement on site. That means consistent, quality-controlled mix every time. 

• High-strength formula — when combined with the recommended latex admix, it meets high-performance standards (e.g. per EN 13813 and classification CT-C20-F10-B1.5) for load-bearing and durability. 

• Versatile — works for floors, walls, ceilings; in wet or dry areas; interior and exterior. 

• Economical & easy to use — saves time and labour (no onsite blending), doesn’t require special tools, and is non-flammable/safe to store and mix. 

• Extra Heavy Service rating — meets the robust flooring performance levels (according to Tile Council of North America (TCNA) classifications, referencing tests like ASTM C627 for heavy-traffic floors). 

• Common packaging: 60 lb bag (~27.3 kg) (in some regions 20 kg bag depending on market). 

• Approximate coverage (when used as mortar bed): for a 60 lb bag: roughly 12 sq ft at 1″ (25 mm) thickness, 3 sq ft at 2″ (51 mm). 

• Shelf-life (for non-rapid versions) is about 2 years if stored correctly — though high humidity reduces shelf life. 

• It contains Portland cement and silica sand — can cause skin burns or eye damage. Avoid direct contact; use protective gloves/eye protection, avoid dust inhalation. 

• Not a substitute for waterproofing membranes: if installation requires waterproofing (e.g. wet areas, showers), you’ll need to use appropriate waterproof membranes, not rely on mortar/grout alone. 

• For certain sensitive materials (e.g. green marble or water-sensitive natural stones), a different adhesive (e.g. epoxy or specialized adhesive) may be recommended. 

•  91 000 74051 This is a cement-based, polymer-modified unsanded grout (not epoxy). 

• Designed for tile/stone joints of width ~ 1 mm to 3 mm — so fairly narrow joints. 

• Works with a variety of surfaces: ceramic tiles, vitrified tiles, glass mosaics, granite, marble and other natural or engineered stones. 

• Comes in multiple packaging sizes (commonly 1 kg or 10 kg) and a wide range of colours (over 30+).

• Smooth, non-scratching finish — since it's unsanded, it’s safer for polished tiles, glass tiles, marble and delicate surfaces where sanded grout could scratch.

• Good adhesion & durability — polymer modification improves strength and bonding compared to plain cement grout. 

• Weather- and water-resistant — suitable for both interior and exterior applications. Colour-fast and uniform — grout retains its colour over time without significant fading. 

• Economical & easy to apply — widely available and a cost-effective option for narrow grout lines. 

Use this grout when:

• Joints between tiles/stones are narrow (1 – 3 mm) — for example, wall tiles, small floor tiles, mosaic, or polished stone surfaces.

• You have delicate or polished tiles (e.g. marble, glass mosaic, vitrified tiles) — unsanded grout reduces risk of scratching.

• You want a smooth, fine finish on tile walls or floors without visible sand particles.

• You need a budget-friendly, versatile grout for regular residential or commercial tiling jobs.

• Because it’s unsanded and meant for narrow joints, it’s not suitable for wider grout joints (> 3 mm) — for those, a sanded grout would be better. As a cement-based grout, it may not offer the same stain-resistance or chemical resistance as high-end epoxy grouts.

• Proper mixing and application is needed (optionally with a grout-admixture for better performance) to achieve good strength and avoid shrinkage/cracking

• 91 000 74051 This is a cement-based, polymer-modified unsanded grout (not epoxy). 

• Designed for tile/stone joints of width ~ 1 mm to 3 mm — so fairly narrow joints. 

• Works with a variety of surfaces: ceramic tiles, vitrified tiles, glass mosaics, granite, marble and other natural or engineered stones. 

• Comes in multiple packaging sizes (commonly 1 kg or 10 kg) and a wide range of colours (over 30+).

• Smooth, non-scratching finish — since it's unsanded, it’s safer for polished tiles, glass tiles, marble and delicate surfaces where sanded grout could scratch.

• Good adhesion & durability — polymer modification improves strength and bonding compared to plain cement grout. 

• Weather- and water-resistant — suitable for both interior and exterior applications. Colour-fast and uniform — grout retains its colour over time without significant fading. 

• Economical & easy to apply — widely available and a cost-effective option for narrow grout lines. 

Use this grout when:

• Joints between tiles/stones are narrow (1 – 3 mm) — for example, wall tiles, small floor tiles, mosaic, or polished stone surfaces.

• You have delicate or polished tiles (e.g. marble, glass mosaic, vitrified tiles) — unsanded grout reduces risk of scratching.

• You want a smooth, fine finish on tile walls or floors without visible sand particles.

• You need a budget-friendly, versatile grout for regular residential or commercial tiling jobs.

• Because it’s unsanded and meant for narrow joints, it’s not suitable for wider grout joints (> 3 mm) — for those, a sanded grout would be better. As a cement-based grout, it may not offer the same stain-resistance or chemical resistance as high-end epoxy grouts.

• Proper mixing and application is needed (optionally with a grout-admixture for better performance) to achieve good strength and avoid shrinkage/cracking

 SmartCare Block Jointing Mortar is a ready-to-use cement-based mortar specially formulated for joining and bedding masonry blocks such as AAC blocks, concrete blocks, fly ash bricks, and similar materials. It is designed for ease of use, good adhesion, and improved structural integrity in wall construction.

• Ready-to-Use Cement Mortar: Factory-blended mix, requiring only water on site for preparation. 

• Non-Shrink & Self-Curing: Reduces cracking and eliminates the need for external curing once mixed. 

• Excellent Adhesion: Provides strong bonding between block courses for durable walls. 

• Flexible: Can accommodate slight movement or thermal expansion without cracking. 

• Fast & Easy Application: Smooth consistency helps quick laying of blocks with minimal effort.

• Jointing of AAC blocks, concrete blocks & fly-ash bricks in masonry work.Internal and external brick/block wall construction. 

• Suitable for load-bearing and non–load-bearing walls. 

• Residential and commercial building work.

• Appearance: Grey powder. 

• Mixing: Add approximately 25–27 % water by weight to the powder and mix to a smooth paste.

• Coverage: Around 3–4 kg per sq m at ~3 mm thickness (approx.). 

• Pot Life: Several hours (depending on conditions) allowing adequate working time. 

1. Surface Preparation: Ensure blocks are clean, free of dust, oil, and loose particles before laying. 

2. Mixing: Place clean water in a container and gradually add the mortar powder while mixing to a smooth, lump-free consistency. 

3. Masonry Application: Spread a uniform layer of mortar on block faces and joints, then place the next block, pressing to achieve alignment and plumb walls.Finishing: Remove excess mortar and ensure joints are tight and compact.

• Commonly supplied in 40 kg bags.

SmartCare Block Jointing Mortar is a ready-mixed, self-curing, non-shrink mortar for block laying and jointing in masonry construction. It simplifies block work, ensures strong bonding, and reduces cracking due to shrinkage or moisture loss.

 91 000 74051 SmartCare Block Jointing Mortar is a ready-to-use cement-based mortar specially formulated for joining and bedding masonry blocks such as AAC blocks, concrete blocks, fly ash bricks, and similar materials. It is designed for ease of use, good adhesion, and improved structural integrity in wall construction.

• Ready-to-Use Cement Mortar: Factory-blended mix, requiring only water on site for preparation. 

• Non-Shrink & Self-Curing: Reduces cracking and eliminates the need for external curing once mixed. 

• Excellent Adhesion: Provides strong bonding between block courses for durable walls. 

• Flexible: Can accommodate slight movement or thermal expansion without cracking. 

• Fast & Easy Application: Smooth consistency helps quick laying of blocks with minimal effort.

• Jointing of AAC blocks, concrete blocks & fly-ash bricks in masonry work.Internal and external brick/block wall construction. 

• Suitable for load-bearing and non–load-bearing walls. 

• Residential and commercial building work.

• Appearance: Grey powder. 

• Mixing: Add approximately 25–27 % water by weight to the powder and mix to a smooth paste.

• Coverage: Around 3–4 kg per sq m at ~3 mm thickness (approx.). 

• Pot Life: Several hours (depending on conditions) allowing adequate working time. 

1. Surface Preparation: Ensure blocks are clean, free of dust, oil, and loose particles before laying. 

2. Mixing: Place clean water in a container and gradually add the mortar powder while mixing to a smooth, lump-free consistency. 

3. Masonry Application: Spread a uniform layer of mortar on block faces and joints, then place the next block, pressing to achieve alignment and plumb walls.Finishing: Remove excess mortar and ensure joints are tight and compact.

• Commonly supplied in 40 kg bags.

SmartCare Block Jointing Mortar is a ready-mixed, self-curing, non-shrink mortar for block laying and jointing in masonry construction. It simplifies block work, ensures strong bonding, and reduces cracking due to shrinkage or moisture loss.

 91 000 74051 SmartCare Block Jointing Mortar is a ready-to-use cement-based mortar specially formulated for joining and bedding masonry blocks such as AAC blocks, concrete blocks, fly ash bricks, and similar materials. It is designed for ease of use, good adhesion, and improved structural integrity in wall construction.

• Ready-to-Use Cement Mortar: Factory-blended mix, requiring only water on site for preparation. 

• Non-Shrink & Self-Curing: Reduces cracking and eliminates the need for external curing once mixed. 

• Excellent Adhesion: Provides strong bonding between block courses for durable walls. 

• Flexible: Can accommodate slight movement or thermal expansion without cracking. 

• Fast & Easy Application: Smooth consistency helps quick laying of blocks with minimal effort.

• Jointing of AAC blocks, concrete blocks & fly-ash bricks in masonry work.Internal and external brick/block wall construction. 

• Suitable for load-bearing and non–load-bearing walls. 

• Residential and commercial building work.

• Appearance: Grey powder. 

• Mixing: Add approximately 25–27 % water by weight to the powder and mix to a smooth paste.

• Coverage: Around 3–4 kg per sq m at ~3 mm thickness (approx.). 

• Pot Life: Several hours (depending on conditions) allowing adequate working time. 

1. Surface Preparation: Ensure blocks are clean, free of dust, oil, and loose particles before laying. 

2. Mixing: Place clean water in a container and gradually add the mortar powder while mixing to a smooth, lump-free consistency. 

3. Masonry Application: Spread a uniform layer of mortar on block faces and joints, then place the next block, pressing to achieve alignment and plumb walls.Finishing: Remove excess mortar and ensure joints are tight and compact.

• Commonly supplied in 40 kg bags.

SmartCare Block Jointing Mortar is a ready-mixed, self-curing, non-shrink mortar for block laying and jointing in masonry construction. It simplifies block work, ensures strong bonding, and reduces cracking due to shrinkage or moisture loss.

 91 000 74051 Bostik Fix All is a high-performance, ready-to-use premium tile adhesive designed for fixing ceramic tiles, vitrified tiles, natural stones, and other cladding materials on floors and walls. It provides excellent bonding strength, superior flexibility, and long-lasting durability for both interior and exterior applications.

• High Bond Strength for secure tile fixing

• Ready-to-use formula – No mixing required

• Excellent water & weather resistance

• Suitable for bathrooms, kitchens & wet areas

• Non-slip / No sag – Ideal for vertical wall tiling

• Good open time for easy application

• Crack-resistant & durable finish

• Cement plaster

• Concrete

• Block work

• Gypsum boards

• Existing tile-on-tile (with proper surface preparation)

• Ceramic tiles

• Vitrified tiles

• Mosaic tiles

• Natural stones (small to medium size)

• Wall cladding & floor tiling

Approx. 1.5 – 2.5 kg/m² depending on trowel size & substrate condition.

Available in small tubs / buckets (varies by supplier).

 91 000 74051 SmartCare Tile Adhesive (Normal) is a cement-based, polymer-modified tile adhesive designed for fixing ceramic tiles, vitrified tiles (small size), and natural stones on internal wall & floor surfaces. It offers good bonding strength, easy workability, and consistent performance for regular tile-laying applications.

• Polymer Modified: Improves adhesion and flexibility.

• High Bond Strength: Ensures strong grip between tiles and substrate.

• Best for Normal Use: Suitable for ceramic tiles & small-size vitrified tiles.

• Easy to Apply: Smooth mixing, good open time, and simple trowel application.

• Slip Resistant: Prevents tile slipping on vertical surfaces.

• Water-Resistant: Suitable for wet areas like kitchens and bathrooms.

• Internal walls & floors

• Ceramic tiles

• Small-format vitrified tiles

• Natural stones (lightweight)

• Bathrooms, kitchens, living rooms

• Plastered surfaces, concrete surfaces

• Mixing Ratio: ~ 20–25% water

• Pot Life: 3–4 hours

• Open Time: 20–25 minutes

• Coverage: 3–4 kg/m² depending on trowel notch size

• Curing: Light foot traffic after 24 hours

1. Surface Preparation: Clean and level the substrate.

2. Mixing: Add powder into clean water and mix to a smooth paste.

3. Troweling: Apply adhesive using a notched trowel.

4. Tile Laying: Press tiles firmly within the open time.

5. Curing: Allow to set and avoid movement for at least 24 hours.

• Available in 20 kg bag (commonly)