TILE CLEANER

Product Details:

 91 000 74051 A powerful, heavy duty, acid - based cleaner for ceramic tiled floors and walls. HEAVY DUTY TILE CLEANER is designed for removal of cement film residues, efflorescence and most oxide stains. It may also be used as general purpose cleaner on other acid resistant surface. Note: Do not use on surfaces that are not resistant to acid such as marble/terrazzo. 

Product Details:

 91 000 74051 Fast acting, non-acidic, concentrated, wall and floor tile / stone cleaner. The special formulation removes dirt, grease and stains from tiled surfaces. When dry, the surface is left hygienically clean.

Product Details:

 91 000 74051 FC Sealer is silicone and fluoropolymer-based sealer for application on natural stone to prevent staining and corrosion from water borne stains. FC Sealer penetrates the interconnected pores in the stone and prevents passage of liquids. Also suitable for use as a sealer coat on cement-based tile joint grouts. FC Sealer is applied as a thin coating that protects stains, soiling, discoloring, etc., 

Product Details:

 91 000 74051 ARDEX ENDURA Heavy Duty Impregnating Sealer is a premium penetrating sealer designed to protect tiles and natural stones from stains, moisture, dirt, and chemical spills. The advanced formula penetrates deep into the pores of the substrate, creating an invisible barrier that does not change the natural look, color, or texture of the surface.
It offers long-lasting protection for both indoor and outdoor applications.

Key Features

• Deep penetrating protection for tiles & stones

• Prevents water absorption, stains & efflorescence

• Does not alter the natural appearance

• Excellent resistance to oils, grease & chemicals

• UV-resistant – ideal for exterior areas

• Long-lasting, easy-to-maintain protection

• Suitable for polished, unpolished & porous surfaces

Suitable Substrates

• Granite

• Marble

• Limestone

• Sandstone

• Slate

• Travertine

• Porous ceramic/vitrified tiles

• Concrete surfaces

Applications

• Kitchen countertops

• Bathroom areas

• Outdoor stone pathways

• Commercial floors

• Parking tiles

• Showrooms, malls & exterior cladding

How to Apply

1. Clean the surface thoroughly and allow it to dry.

2. Apply the sealer evenly using a brush, roller, or cloth.

3. Allow penetration for 5–10 minutes; wipe off excess.

4. Apply second coat if needed for high-porosity surfaces.

5. Cure for 24 hours before heavy use.

Product Details:

 91 000 74051 Asian Paints SmartCare Tile Cleaner / Asian Paints SmartCare Tile Cleaner 500 ml
A specially formulated tile and surface cleaning liquid from Asian Paints SmartCare range that removes stains, grime, grease, grout residue, and daily dirt from tiles and other surfaces effectively. It restores the shine and beauty of tiles and helps prepare surfaces before applying waterproofing or grout products. 

✅ Key Features

• Active Cleaner & Degreaser: Breaks down grease, soap scum, mineral deposits, and cement grout stains. 

• Daily Cleanup: Suitable as a regular tile cleaner for kitchens, bathrooms, floors, and walls. 

• Use Before Epoxy Work: Good for preparing surfaces before epoxy grout or tile waterproofing applications.

• Easy to Use: Can be diluted for mild cleaning or used concentrated for tough stains.

✔ Ceramic tiles
✔ Porcelain & vitrified tiles
✔ Bathroom floors & walls
✔ Kitchen floors & backsplash
✔ Tile grout cleaning
✔ Surface prep before coating or grouting 

�� How to Use

1. Mild Stains: Mix with water (e.g., 1:1), apply with a sponge or cloth, and scrub gently. 

2. Tough Stains: Use the cleaner at full strength, scrub the area, and rinse with clean water. 

3. Safety Tip: Wear gloves; test a small area first if using on coloured stones or polished surfaces. 

�� Pack Sizes

• 500 ml bottle – Handy small pack for quick jobs.

• 1 L bottle – Standard size for frequent cleaning.

Product Details:

• High quality rapid action cleaner, & degreasing solution
• For use on mosaic, ceramic, vitrified tiles, bath tubs, wash basin
• Removes stains
• Retains tile gloss

Description
Roff Cera Clean is a high quality rapid active cleaner and degreasing solution for use on tiles, bathtubs, wash basin, privy basin and concrete etc. It is used to clean whitish spot/ layer as normally observed in the bathroom under plastic/ metal buckets (normal detergent is not helpful) with ease. It is also used as rapid removal of white yellowish spot/layer along with water stains over tiles, cement stains, grime, oil, paint stains, grease, moss and wax from concrete, asbestos, terrazzo and ceramics. 

Stain cleaning for ceramic tile, glazed tiles, porcelain tiles, vitrified tiles, glass mosaic tiles & sanitaryware. Cleaning moss and wax from concrete, asbestos, terrazzo and ceramics. Surface before & after application of epoxy products. Natural stones* Cleaning floor and wall tiling in kitchen, bathrooms, toilets, garages, factories, general building sites & residential tiling. Internal & external tiling area. Domestic & commercial tiling area. Routing tile cleaning with mop in bathroom & other tiling area.

Product Details:

• 91 000 74051 “TileFixo Shine Tile Cleaner” is a tile-cleaning / stain-removal liquid marketed under the TileFixo/UltraTech line — not an adhesive or grout. 

• It’s described as a powerful acid-based tile cleaner meant to clean and restore tiles by removing hard stains, cement / grout haze, rust/mineral deposits, efflorescence, grime — and bringing back the tile’s original shine. 

��️ Where & How It’s Used

• Suitable for ceramic tiles, vitrified tiles, glazed tiles, glass-mosaic tiles — basically tile surfaces used in floors or walls. 

• It is typically used for post-construction cleaning (after tile installation — to remove cement/grout residue), or for maintenance cleaning (to remove stains, rust, mineral deposits, efflorescence, general dirt) on tiled surfaces. 

• Comes in liquid form and sold in containers (commonly 1 L or 5 L) as per listing. 

• Effective stain removal and cleaning power — capable of removing tough stains, cement/grout residue, mineral deposits that ordinary water or soap cannot. 

• Restores tile shine — helps bring back the original luster/finish of vitrified/glazed/ceramic tiles after construction or long use. 

• Suitable for variety of tiles — works on ceramic, vitrified, glazed, glass-mosaic tiles — but as with any acid-based cleaner, one must ensure the surface is compatible. 

⚠️ Things to Check / Use Carefully

• Because it’s described as acid-based, it may not be suitable for acid-sensitive surfaces — e.g. unglazed natural stone, marble, terrazzo, some metal finishes, or surfaces that can corrode/etch under acid. This is typical for acid-based tile cleaners (though I couldn’t find a public TDS warning explicitly covering all those cases).

• Always follow instructions: apply as per manufacturer’s directions, ensure adequate dilution (if needed), use gloves/ventilation, and rinse thoroughly after cleaning to avoid residue or damage.

• Test on a small area first — before using on entire floor/wall — to ensure tiles are not discolored, etched or damaged by the cleaner (especially if tiles are glazed, vitrified, or have special finishes).

�� When It’s Useful

• After tile installation — to remove cement, grout residues, dust and restore shine.

• Periodic deep-cleaning of tiled floors/walls (kitchen, bathroom, balconies) especially where stains, hard-water marks, rust, mineral deposits accumulate.

• Renovation / maintenance jobs where tiles have become dull or their finish degraded by grime, cement slurry, mortar haze, etc.

Product Details:

 91 000 74051 ARDEX ENDURA Impregnating Tile & Stone Sealer is a high-quality penetrating sealer formulated to protect natural stones and tiles from stains, moisture, dirt, and everyday wear. The sealer penetrates deep into the pores without forming a surface film, ensuring the surface retains its natural color, texture, and appearance.
It provides long-lasting protection for both interior and exterior surfaces.

Key Features

• Deep penetrating formula for long-lasting protection

• Prevents water absorption, stains & dust buildup

• Maintains natural look — no gloss or color change

• Resistant to oils, mild chemicals & spills

• Ideal for porous stones & tiles

• UV-resistant — suitable for outdoor use

• Easy to apply & quick drying

Suitable For

• Marble

• Granite

• Slate

• Sandstone

• Limestone

• Travertine

• Porous tiles (ceramic, vitrified)

• Concrete & cement surfaces

Application Areas

• Countertops

• Bathrooms & wet areas

• Outdoor pathways

• Exterior walls & cladding

• Living room floors

• Commercial stone flooring

How to Apply

1. Clean and dry the surface completely.

2. Apply the sealer evenly using a cloth, brush, or roller.

3. Allow 5–10 minutes for penetration.

4. Wipe off excess sealer.

5. For highly porous surfaces, apply a second coat.

6. Allow full curing for 24 hours

Product Details:

 91 000 74051 An effective cleaner designed for CP Fittings & Sanitary wares. This unique product removes stubborn water stain marks and hard scaling which develops due to hardness of water.

Product Details:

 91 000 74051 A highly effective cleaner designed for everyday maintenance of tiles, marbles & natural stones etc. Suitable as a general purpose cleaner. It is very much safe and less reactive (compared to other cleaners based on Hydrochloric acid) especially on marble surfaces. Designed specially for removal of lime scale & for everyday maintenance of tiles, marbles, natural stones, etc. Ideal for regular maintenance of heavily trafficked areas such as shopping malls, hotels etc.

Product Details:

 91 000 74051 ARDEX ENDURA Power Clean is a high-performance tile and surface cleaner specially formulated to remove tough stains, dirt, grime, and construction residues from various surfaces. It effectively cleans ceramic tiles, vitrified tiles, granite, marble, stones, concrete floors, and industrial surfaces without damaging the substrate.
The advanced formula penetrates deep into the pores, loosening stubborn dirt and restoring the original shine of the surface.

Features

• Powerful cleaning action for deep-seated stains

• Removes cement residues, dust, grease & grime

• Suitable for floors, walls, kitchens & bathrooms

• Non-corrosive when diluted as recommended

• Safe for most tile and stone surfaces

• Easy to apply & quick action formula

Where to Use

• Ceramic & vitrified tiles

• Granite & natural stone (after dilution)

• Bathroom floors/walls

• Industrial floors

• Kitchens, counters & exterior areas

Application

1. Dilute Power Clean with water as per requirement

2. Apply on the surface using brush or mop

3. Allow it to work for a few minutes

4. Scrub gently and rinse with clean water

Product Details:

 91 000 74051 UNDER TILE & STONE PRIMER is a water based primer designed as a barrier to prevent water, alkali and other compounds from reaching the surface and to avoid efflorescence that can cause surface discolouration especially in cement substrates, stones and porous tiles. So the primer acts as an excellent efflorescence resistant.. UNDER TILE & STONE PRIMER forms a strong cohesive film that also provide chemical barrier to the migrating alkali and other chemicals.