Civilize Mart

•  91 000 74051 POWERGROUT NS2 is a cement-based, polymer-enriched, high-performance precision grout, designed for structural/industrial-grade grouting rather than tile-adhesive or joint-grout tasks. 

• It is available in two variants: Flowable and Normal — to suit different site conditions and grouting requirements. 

POWERGROUT NS2 is meant for heavy-duty, load-bearing or structural applications.

•  91 000 74051 Powergrout NS3 is a cement-based, polymer-enriched, non-shrink, non-expanding precision grout designed for structural/industrial-grade applications. 

• It belongs to the “Industrial & Precision Grout” line of UltraTech’s building-products range. 

• It comes in two variants: NS3 Flowable and NS3 Normal — allowing flexibility depending on site needs.

Powergrout NS3 is suited for structural and medium-heavy grouting jobs such as: 

• Grouting micropiles, pile caps, shear-wall bond beams. 

• Fixing and anchoring precast elements, fasteners, rails, structural anchors. Manufacturing high-strength pavers & blocks, and concrete repairs where a strong binder and grout is required.

• 91 000 74051 UltraTech TILEFIXO Sumo CT is a cement-based, polymer-modified tile adhesive designed for fixing ceramic tiles on floors and walls — mostly indoor, dry areas.

• It’s part of the “TileFixo” range by UltraTech, meant to ensure strong bonding between tiles and cementitious substrates (concrete, cement-plaster, screed, etc.)

•  91 000 74051 It’s a cement-based, polymer-modified tile adhesive. It’s a “heavy duty” adhesive intended for fixing ceramic tiles (floors & walls) and small-format natural stones (floors) — but only for indoor, dry areas. 

• It conforms to technical standards: Type 1T (as per IS 15477:2019) and C1TE (per EN 12004 / ISO 13007-1) for thin-bed tile adhesives. 

• Self-curing (so you don’t need extra curing agents). 

• Single-component — you just add water and mix.

• Excellent adhesion to cement-based substrates (concrete, screed, plaster, etc.). 

• 91 000 74051 It’s a cement-based, polymer-modified tile adhesive. 

• Strong adhesion — gives a reliable bond, helping avoid problems like tiles lifting or hollow sound under tiles.

• Water-/dampness-suitable — works even in wet zones, unlike adhesives meant only for dry interiors

• Self-curing and single-component — just mix with water (no extra curing agents needed), and it’s ready for application. 

• No pre-soaking of tiles required — simplifies preparation. 

• High slip resistance — safer for floors (less slippage risk), especially where water might make surfaces slippery. 

• Tiling vitrified tiles, natural stone, or glass-mosaic tiles.

• Installing tiles in wet or damp indoor spaces (bathrooms, kitchens, balconies, etc.).

• Substrate is cement-based (plaster, concrete, screed, etc.).

• You prefer a ready-to-mix, no-fuss adhesive offering good bond and moisture resistance.

• Substrate is not cement-based — for other substrate types check compatibility or use a suitable adhesive.

• You have large-format heavy tiles — for larger/heavier tiles, adhesives designed for “large format / heavy load” may be more suitable.

•  91 000 74051 Aqua Marine VT Plus is a cement-based, polymer-modified tile adhesive, under the “TileFixo” range of UltraTech. 

• It is intended primarily for vitrified tiles, natural stones, and glass-mosaic tiles. 

• It meets the standards Type 2T (as per IS 15477:2019) and C2TE (as per EN 12004 / ISO 13007-1) for thin-bed tile adhesives. 

• For floor and wall tiling — indoors and outdoors — when using vitrified tiles, natural stones or mosaic tiles.

• Suitable for interior and exterior applications — including wet areas and outdoor floors — making it more versatile than adhesives meant only for dry indoor use. 

• Supports tile-on-tile applications (i.e. laying new tile over existing tile, if base substrate is cement-based) under suitable conditions.

• Self-curing and single-component — easy to mix with just water. 

• Excellent adhesion to cement-based substrates (concrete, plaster, screed, etc.), helping ensure a firm bond and reducing chances of hollow spots under tiles. High slip resistance — beneficial especially for wall tiling or vertical surfaces, preventing tiles from sliding before adhesive sets. No need to pre-soak tiles — simplifies and speeds up the tile-laying process. Extended open time — gives more working time to adjust/level tiles before adhesive sets, which helps proper alignment and finish. 

• Durable and water-resistant — suitable for wet zones, exterior floors/walls, and exposures to dampness — unlike many adhesives meant only for dry indoor areas

•  91 000 74051 TileFixo PU 2K is a two-component, polyurethane-based tile & stone adhesive from the TileFixo range. 

• Unlike typical cement-based adhesives, PU 2K is formulated to bond tiles/stones over a broad variety of substrates — including cementitious surfaces, metals, glass, plywood/wood, drywall boards, existing tiles/stones, epoxy/PU surfaces, etc.

• It is suitable for both interior and exterior applications, and for floors and walls — making it one of the most versatile adhesives in the TileFixo lineup.

•  91 000 74051 TileFixo Rapid is a two-component, epoxy-based tile adhesive in the overall TileFixo line.  

TileFixo Rapid is versatile in terms of tile types and surfaces:

• Suitable for all types of tiles and natural stones — ceramic, vitrified, porcelain, stone, glass-based tiles, etc. 

• Can be used on floors, walls, ceilings, vertical surfaces, overhead surfaces, not only traditional cement-based substrates. 

• Substrate range is broader than cement-only adhesives — works on cementitious surfaces, metals, wood/plywood, existing tiles or stones, drywall, PU/epoxy surfaces, etc. 

• Suitable for both interior and approved exterior applications.

Because of this flexibility, TileFixo Rapid is often chosen when you need a strong, reliable bond on non-standard surfaces (like wood, metal, old tiles), or when you want quick setting / fast installation (for vertical, overhead or difficult-to-handle surfaces).

•  91 000 74051 It is a cement-based, polymer-modified tile adhesive from the UltraTech “TileFixo” range. 

• It is designed for medium-format tiles and natural stones — such as granite, marble, vitrified tiles, etc. 

• Classified under Type 3T (as per IS 15477:2019) and C2TE (as per EN 12004 / ISO 13007-1) standards for thin-bed adhesives.

  • Suitable for floors and walls, for both indoor and outdoor applications. 

  • Appropriate when using natural stone tiles, granite/marble, or medium-size vitrified tiles — places where higher bond strength and durability are needed. Can be used in wet or damp zones (bathrooms, balconies, exterior areas) when applied properly — because of its water resistance and strong adhesion. 

  • High bonding strength: Good initial and long-term adhesion, even under water exposure, heat, freeze-thaw cycles. Polymer-modified: Better bonding and flexibility compared to plain cement adhesives — helps stick heavy tiles/ stones securely. 

  • Single-component and self-curing: Simply mix with water (no special additives) and apply; no extra curing agents need

�� What It’s Used For�� Key Features & Strengths

• 91 000 74051 TileFixo Royal NT Plus is a polymer-modified cementitious tile adhesive made by UltraTech, designed for fixing large format tiles and natural stones (like marbles, granites, large-size tiles) on floors and walls.

• It’s suitable for both interior and exterior applications, and works on cement-based substrates such as plaster, concrete, screed, cement boards, bricks, etc.

• Ideal for large tiles / slabs / natural stones on walls and floors, for both indoor and outdoor. 

• Also suitable for wet or damp environments, including submerged areas like swimming pools, water tanks, fountains, terraces, balconies — thanks to its water-resistant properties. 

• Works well for tile-on-tile or new tile installations, over cement surfaces. 

•  91 000 74051 It is a cement-based, polymer-modified tile adhesive from the UltraTech “TileFixo” range. 

• It is designed for medium-format tiles and natural stones — such as granite, marble, vitrified tiles, etc. 

• Suitable for floors and walls, for both indoor and outdoor applications. 

• Appropriate when using natural stone tiles, granite/marble, or medium-size vitrified tiles — places where higher bond strength and durability are needed. Can be used in wet or damp zones (bathrooms, balconies, exterior areas) when applied properly — because of its water resistance and strong adhesion. 

• High bonding strength: Good initial and long-term adhesion, even under water exposure, heat, freeze-thaw cycles. Polymer-modified: Better bonding and flexibility compared to plain cement adhesives — helps stick heavy tiles/ stones securely. 

• Single-component and self-curing: Simply mix with water (no special additives) and apply; no extra curing agents needed

• 91 000 74051 “TileFixo Shine Tile Cleaner” is a tile-cleaning / stain-removal liquid marketed under the TileFixo/UltraTech line — not an adhesive or grout. 

• It’s described as a powerful acid-based tile cleaner meant to clean and restore tiles by removing hard stains, cement / grout haze, rust/mineral deposits, efflorescence, grime — and bringing back the tile’s original shine. Suitable for ceramic tiles, vitrified tiles, glazed tiles, glass-mosaic tiles — basically tile surfaces used in floors or walls. 

• It is typically used for post-construction cleaning (after tile installation — to remove cement/grout residue), or for maintenance cleaning (to remove stains, rust, mineral deposits, efflorescence, general dirt) on tiled surfaces. 

• Comes in liquid form and sold in containers (commonly 1 L or 5 L) as per listing. 

• Effective stain removal and cleaning power — capable of removing tough stains, cement/grout residue, mineral deposits that ordinary water or soap cannot. 

• Restores tile shine — helps bring back the original luster/finish of vitrified/glazed/ceramic tiles after construction or long use. 

• Suitable for variety of tiles — works on ceramic, vitrified, glazed, glass-mosaic tiles — but as with any acid-based cleaner, one must ensure the surface is compatible. 

• Because it’s described as acid-based, it may not be suitable for acid-sensitive surfaces — e.g. unglazed natural stone, marble, terrazzo, some metal finishes, or surfaces that can corrode/etch under acid. This is typical for acid-based tile cleaners (though I couldn’t find a public TDS warning explicitly covering all those cases).

• Always follow instructions: apply as per manufacturer’s directions, ensure adequate dilution (if needed), use gloves/ventilation, and rinse thoroughly after cleaning to avoid residue or damage.

• Test on a small area first — before using on entire floor/wall — to ensure tiles are not discolored, etched or damaged by the cleaner (especially if tiles are glazed, vitrified, or have special finishes).

• 91 000 74051 TileFixo Sumo CT is a cement-based, polymer-modified tile adhesive designed for bonding tiles to floors and walls. 

• It is part of the “TileFixo” range from UltraTech. 

• It is ideal for internal dry areas — think indoor floors and walls. 

• Suitable for thin-bed floor and wall applications of clay & ceramic tiles, especially those of small dimensions.

• The base surface should be cement-based (like plaster, concrete, screed etc.). 

• Excellent adhesion: forms a strong bond between tile and substrate. 

• Polymer-modified for durability: the polymer additive improves bonding strength and longevity compared to plain cement adhesives. 

• Self-curing and single-component: no need for extra curing agents or complicated mixing; just mix with water. 

• Easy mixing and application: requires about 24–27% potable water by weight. Mix for 2–3 min with mechanical stirrer, let sit 2 min, remix before use.

• Prevents hollowness / debonding: the strong bond and formulation reduce the risk of “hollow-sound” beneath tiles, and ensure long-term adhesion.

• Not meant for wet / damp areas — Sumo CT is recommended only for dry indoor areas.

• Surface should be clean (free of dust, oil, laitance) and properly prepared — roughness and cleanliness important for good adhesion

•  91 000 74051 According to a non-official listing, UltraTech describes “TileFixo Ultima Plus” as a “premium, polymer-enriched adhesive for large-format vitrified, porcelain, and natural stone tiles.” It appears to belong to the broader UltraTech “TileFixo” range — meant for tile and marble adhesion. TileFixo adhesives, it likely uses a polymer-modified cementitious formula, which gives stronger adhesion compared to plain cement adhesives. 

• Intended for large-format vitrified/porcelain or natural stone tiles — suggesting it’s designed for heavy, large-size tiles rather than small ceramic tiles. 

• On official UltraTech website (TileFixo product-range page), “Ultima Plus” is currently not listed among the standard variants. 

• There is no publicly available technical data sheet (TDS) specifying coverage, water-to-powder ratio, open-time, adhesion strength etc. — so performance claims cannot be independently verified.

• Confirm with the retailer or seller whether this packaging is genuine and if they have a TDS or batch-certification — especially since it’s not listed on official site.

• Use for large-format vitrified/porcelain or natural stone tiles — as that seems to be its intended purpose.

• Ensure substrate preparation as for any TileFixo adhesive: clean, cement-based surface, free from dust/oil/laitance.

• Because technical specs are unclear, do a small trial patch (if possible) first — check bonding strength after 48–72 hrs, before doing full-scale tiling.

91 000 74051 UltraTech PowerGrout PGM is a premium polymer-modified cementitious tile grout used for filling tile joints in floor and wall applications. It provides strong bonding, smooth finish, and long-lasting performance. The grout is water-resistant, crack-resistant, and helps maintain neat, uniform tile joints. It is ideal for residential as well as commercial tiled areas.

Application Method:
Clean the tile joints thoroughly before application. Mix UltraTech PowerGrout PGM with clean water to obtain a smooth paste. Apply using a rubber float, pressing firmly into the joints. Remove excess grout and clean the tile surface after initial setting.

•  91 000 74051 TileFixo Style 2K Epoxy Grout is a two-component epoxy tile grout from UltraTech, designed to fill joints between tiles, marble, stone, vitrified/ceramic/glass mosaic/metal tiles, and engineered/precast surfaces.

• Suitable for both floors and walls (horizontal and vertical surfaces).

• Works for interior and external areas, including wet/water-exposed zones such as kitchens, bathrooms, balconies/terraces, swimming pools, etc. 

• Recommended for joint widths ~ 2 mm to ~ 15 mm, according to product specifications for internal/external usage. 

• Water-proof & stain-resistant — helps prevent seepage, dampness, and staining of grout joints. Chemical, temperature & UV-resistant — suitable for heavy-duty use, even in outdoor or exposed conditions.

• Crack-resistant, durable and low-shrinkage — provides long-lasting, stable grout joints. 

• Easy to clean & hygienic — anti-fungal/anti-bacterial, traffic-resistant, good for kitchens, bathrooms and high-use areas. Offers a uniform colour finish and aesthetic look — helpful when using premium tiles, glass mosaics or natural stones.

•  91 000 74051 It’s a cement-based, polymer-modified tile adhesive. 

• It is specially formulated for vitrified tiles, natural stones, and glass-mosaic tiles (floor or wall). It complies with relevant technical standards: Type 2T (as per IS 15477:2019) and C2T (as per EN 12004 / ISO 13007‑1). 

• Suitable for interior floors & walls, including wet areas — e.g. bathrooms, kitchens, balconies — because it’s designed to handle moisture/dampness. 

• Works on cement-based substrates such as plastered walls, concrete floors, screed, etc. 

• Also good for tile-on-tile applications (i.e. laying new tiles over old tiles), when the old surface is appropriately prepared. 

• Strong adhesion — gives a reliable bond, helping avoid problems like tiles lifting or hollow sound under tiles.

• Water-/dampness-suitable — works even in wet zones, unlike adhesives meant only for dry interiors

• Self-curing and single-component — just mix with water (no extra curing agents needed), and it’s ready for application. 

• No pre-soaking of tiles required — simplifies preparation. 

• High slip resistance — safer for floors (less slippage risk), especially where water might make surfaces slippery. 

• Tiling vitrified tiles, natural stone, or glass-mosaic tiles.

• Installing tiles in wet or damp indoor spaces (bathrooms, kitchens, balconies, etc.).

• Substrate is cement-based (plaster, concrete, screed, etc.).

• You prefer a ready-to-mix, no-fuss adhesive offering good bond and moisture resistance.

• Substrate is not cement-based — for other substrate types check compatibility or use a suitable adhesive.

• You have large-format heavy tiles — for larger/heavier tiles, adhesives designed for “large format / heavy load” may be more suitable.

• 91 000 74051 TileFixo GROUT CG is a single-component, cement-based, pigmented grout designed for filling joints between tiles, natural stones, marble, granite, etc.

• It is part of the “TileFixo” product range from UltraTech — meant for grout/joint-filling (not tile-adhesive) rather than tile bonding. 

• Suitable for joint filling in tiles, marble, granite, natural stone floors and walls. 

• Works for horizontal (floors) and vertical (walls) applications. 

• Max recommended tile-joint width: up to 6 mm × 6 mm. 

• Cement-based + polymer-modified — gives better bonding strength compared to plain grout. Non-shrink, self-curing grout: minimizes shrinkage, ensures consistent finish over time.