Civilize Mart

An "STP membrane roll" refers to a roll of waterproofing membrane manufactured by STP (likely referring to a company like "STP Ltd"), typically made from a bitumen-based material modified with Atactic Polypropylene (APP) and reinforced with a spun-bonded polyester mat, providing excellent flexibility, weather resistance, and high tensile strength, often used for applications like protected roofing and waterproofing in single or multi-layer systems

SuperThermoLay® is a five layered system with Atactic Polypropylene (APP) modified non-woven polyester reinforced weighing 140 gm / m2 bituminous membrane (2, 3, 4 & 5 mm) for superior waterproofing. The torch side of the membrane is covered with polyethylene film for protection of the membrane. The polymer modification of bitumen with APP results in an excellent resistance to hot and cold temperatures.SuperThermoLay® is supplied in following variants:• Plain finish with thermo-fusible polyethylene film on both surfaces.• Mineral / natural grey slate finish with thermo-fusible polyethylene film on one surface, and mineral / natural gray slate on the other surface

 91 000 74051 Dr. Fixit Flexi PU 270(I) A high-performance, solvent-based, one-component, polyurethane waterproofing membrane. It is liquid-applied, cures upon contact with air moisture, and forms a highly flexible, seamless, and elastic protective layer.
Primary Function: To provide a durable, long-lasting, and root-resistant waterproofing barrier for a wide variety of structures, capable of bridging cracks and withstanding significant structural movement.
Key Features & Benefits (from TDS):
Highly Elastic & Flexible: Exceptional elongation (400%) to bridge cracks up to 2mm and accommodate movement.Seamless Membrane: Forms a continuous, joint-free layer, eliminating weak points.Excellent Adhesion: Bonds strongly to most substrates (concrete, metal, asbestos, etc.).Breathable: Allows water vapour to escape from the structure (permeable).Durable: Resistant to water, frost, chemicals, oils, detergents, and plant roots.Wide Temperature Range: Maintains properties from -40°C to +80°C.Root Resistant: Certified as resistant to plant roots (EN 13948), making it ideal for roof gardens.
Q1: How is this product applied?A: It is typically applied in 2 or 3 coats by roller, brush, or airless spray.Surface Prep: Surface must be clean, sound, and absolutely dry (<5% moisture). New concrete must cure for 28 days.Priming: Absorbent surfaces must be primed with Dr. Fixit Primer PU or Dr. Fixit Pidipoxy MIFP.Application: Apply the first coat. Apply the second coat after 12-18 hours (but within 48 hours).Reinforcement: Reinforce critical areas (corners, joints, pipes) with Geotextile Fabric embedded in the wet coating.Q2: What is the coverage area?A: The total consumption is approximately 1.2 – 1.5 kg per square meter for a 2 or 3-coat system. Actual consumption depends on surface porosity and application method.Q3: How long does it take to cure?A:Tack-free: 5-6 hours (at 20°C, 50% RH)Light foot traffic: 24 hoursFinal cure: 7 daysQ4: Does it need a protective layer?A: Yes, protection is mandatory.For terraces: Protect with a 40-50mm concrete screed (M20 grade) laid over a geotextile separation layer.For roof gardens: Follow the screed with finishing layers (brickbat coba, tiles, etc.).Alternatively, it can be finished with Dr. Fixit PUTC (polyurethane top coat) for UV stability and colour.Q5: Can it be applied on wet surfaces?A: No. Absolutely not. The surface must be completely dry (<5% moisture content). The TDS explicitly warns: "Do not wash surface with water." before application.Q6: What is the shelf life?A: 9 months from the date of manufacture when stored in its original, unopened container in a dry, cool place (5°C to 30°C), protected from moisture and direct sunlight.Q7: Is it safe? What precautions are needed?A: Caution Required. The product contains isocyanates. During application, you must wear:Protective clothingChemical-resistant glovesEye gogglesAvoid contact with skin and eyes. Ensure adequate ventilation. Always refer to the Material Safety Data Sheet (MSDS) before use.Q8: How does it handle cracks?A: It has excellent crack-bridging capabilities:It can bridge dynamic cracks up to 2mm wide.Larger cracks and joints must be pre-sealed with Dr. Fixit PU Sealant and reinforced with geotextile fabric before the general membrane application.

 91 000 74051 SikaShield® P24 PE IN 3 mm is an APP modified bituminous waterproofing membrane with a thickness of 3 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with polyethylene foil, which ensures the bond of the overlying layer. The underside of the product has a burn-off film for easy torch-application

 91 000 74051 SikaShield® P24 PE IN 3 mm is an APP modified bituminous waterproofing membrane with a thickness of 3 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with polyethylene foil, which ensures the bond of the overlying layer. The underside of the product has a burn-off film for easy torch-application

 91 000 74051 Tar Felt is a high-performance bitumen-based waterproofing membrane designed to provide long-lasting protection against water ingress, dampness, and moisture penetration in residential, commercial, and industrial structures. It is manufactured by impregnating and coating a strong base material such as felt, hessian, fiberglass, or polyester with refined bitumen, ensuring superior durability and adhesion.

Product Characteristics:

• Factory-coated with high-quality bitumen for enhanced waterproofing

• Supplied in roll form for easy handling and installation

• Excellent bonding with concrete, brickwork, and masonry surfaces

• Resistant to water, moisture, and varying weather conditions

Applications:

• Terrace and roof waterproofing systems

• Basement walls and foundation protection

• Bathrooms, toilets, and wet areas

• Industrial sheds, warehouses, and podium slabs

• Damp-proof courses (DPC) in masonry works

Types Available:

• Plain Tar Felt

• Hessian / Felt Base Tar Felt

• Fiberglass or Polyester Reinforced Tar Felt

• APP / SBS Modified Bitumen Tar Felt

Installation Method:

Tar Felt is applied on a clean, dry, and prepared surface using hot bitumen bonding or torch-on application. Sheets are laid with adequate overlaps to ensure seamless waterproofing. A protective layer such as cement screed, tiles, or reflective coating is recommended for extended service life.

Advantages:

• Proven and economical waterproofing solution

• High tensile strength and durability

• Effective barrier against leakage and dampness

• Suitable for both new construction and repair works

This product is ideal for projects requiring reliable, professional-grade waterproofing performance.

 91 000 74051 Premium Sheet Waterproofing for Strong, Leak-Free RoofsCivilizeMart offers high-quality APP Membrane Roofing Services to protect terraces, roofs, and wet areas from long-term water leakage. APP (Atactic Polypropylene) membranes are durable, flexible, and heat-resistant waterproofing rolls that provide a seamless shield over concrete surfaces.
✅ Why Choose APP Membrane?�� 100% Waterproof Layer – Ideal for flat and sloped roofs
�� Heat & UV Resistant – Withstands high temperatures
�� Flexible & Crack Bridging – Adapts to structural movement
��️ Long Lifespan – Durable and low maintenance
�� Root Resistant (for gardens) – Good for planter boxes & green roofs
�� Perfect for:RCC Roofs & Slabs
Residential & Commercial Terraces
Industrial Roofs
Bathrooms & Balconies
Podiums and Water Retaining Structures
��️ APP Membrane Application Process:Surface Cleaning & Leveling
Primer Coating Application
Heating & Laying of APP Membrane with Torch
Overlap Sealing & Edge Detailing
Final Protection Screed or Tiling (optional)
�� Available in:Thickness: 2mm, 3mm, and 4mm
Types: Plain finish / Sand finish / Mineral finish
Reinforced with polyester for extra strength
��️ “Tough on leaks. Trusted by professionals.”APP Membrane – The smart choice for long-lasting roof protection.

Dr. Fixit Samshield P SBS modified self adhesive waterproofing membrane consists of a self adhesive polymer modified bitumen layer coated on to a tough high density polyethylene film and protected on the other side by a silicone release film. 

VT PREBOND SCM1.5 - Sand Coated HDPE Membrane is a unique, high performance, flexible High-Density Polyethylene (HDPE) sheet with pre-applied pressure sensitive adhesive and a reactive inorganic fine granule layer on it, manufactured & supplied in thickness of 1.5 mm, designed for waterproofing basements & podiums of new buildings. The membrane is designed for adhesion to poured concrete for easy application below rafts & reinforcements.Based on advanced polymer chemistry, the membrane has excellent resistance to chemical acids, bases, alkalis, salts and other corrosive materials, while providing a barrier to water seepage from below ground. The sheet remains flexible over years, maintaining its integrity and continuing to provide protectionHigh mechanical properties of the membrane ensure superior puncture resistance and tensile strength, while enabling excellent bond along the edges.

We take pleasure in introducing ourselves as leading firm by offering Dr Fixit Torchshield.
APP/ SBS modified bitumen based membranes for waterproofing of roofs & basements:
Recommended for waterproofing of building roofs of all types, basement, foundations and water retaining structures like swimming pools and for bridges & tunnels. Highly suitable for both existing as well as new roofs.
Benefit:
Self-finished membrane provides joint less monolithic surface provides an excellent watertight solutionHigh tensile strength, tear & puncture resistance properties make it highly flexible & durableIt is an impermeable membrane with less water absorption properties, hence protects the structure from weatheringWithstands thermal & structural stresses effectively without any fatigue, improves performance
Note:
For roofs subject to foot traffic, need concrete screed or tiling overlay. For roofs not subject to foot traffic, needs to be coated with aluminium paint for protection against UV attack

Asian Paints SmartCare Waterproofing Membrane is an APP polymer-modified sheet reinforced bituminous membrane for superior waterproofing.

AquaArm SBS 3000X is high performance, cold applied, flexible, preformed membrane with cross laminated HDPE filmwhich has a high chemical, puncture resistance. AquaArm SBS 3000X is a vapor, hazardous gas & waterproof membranefor water excluding structures. It protects structure from aggressive chemicals. Confirms type 2,3, &4 grade basement as per BS 8102: 2009, Type A waterproofing Product Confirms IS 16471: 2017, Type A waterproofing Product, Complies BRE 211 guideline.

Asian Paints SmartCare self-adhesive SBS membrane with HDPE lining is a cold applied self-adhesive waterproofing membrane based on SBS modified bitumen. The bitumen compound is laminated onto an impervious, non-perforated, high performance cross laminated HDPE film. The membrane is protected on the self-adhesive side with a release film. This membrane is used as waterproofing/ damp proofing layer over hardenconcrete by using bitumen primer. It may be used for horizontal and vertical application and as a damp proofing course for tanking below ground structures, subways and retaining walls, tunnel, Cave and other underground constructionsAREA OF APPLICATION: It may be used for horizontal and vertical application and as a damp proofing course for tanking below ground structures, subways and retaining walls,tunnel, Cave and other underground constructions

VT PREBOND SCM1.5 - Sand Coated HDPE Membrane is a unique, high performance, flexible High-Density Polyethylene (HDPE) sheet with pre-applied pressure sensitive adhesive and a reactive inorganic fine granule layer on it, manufactured & supplied in thickness of 1.5 mm, designed for waterproofing basements & podiums of new buildings. The membrane is designed for adhesion to poured concrete for easy application below rafts & reinforcements.Based on advanced polymer chemistry, the membrane has excellent resistance to chemical acids, bases, alkalis, salts and other corrosive materials, while providing a barrier to water seepage from below ground. The sheet remains flexible over years, maintaining its integrity and continuing to provide protectionHigh mechanical properties of the membrane ensure superior puncture resistance and tensile strength, while enabling excellent bond along the edges.

 91 000 74051 SmartCare Damp Proof Ultra is a fiber-reinforced elastomeric liquid-applied waterproofing membrane from Asian Paints. It is formulated with PU hybrid polymers and reinforcing acrylic fibers. On curing, it forms a seamless, durable, crack-bridging waterproofing film that protects terraces, roofs, parapets, and exterior walls against water ingress, UV rays, and fungal growth.
Key Features & Benefits
Waterproofing Strength – Resists positive hydrostatic pressure up to 10 barsCrack-Bridging – Effectively bridges cracks up to 2.5 mmThermal Comfort – Reduces surface temperature up to 10°CFiber Reinforced – Improves strength, mechanical properties & abrasion resistanceUV, Anti-Fungal & Anti-Algal – Long-term resistance against sunlight and microbial growthAnti-Carbonation – Acts as a barrier to CO₂, prolonging structural lifeWarranty – Comes with 10 years waterproofing warranty on terraces & verticals (with topcoat)
⚙️ Technical SpecificationsForm: Ready-to-use viscous liquidColor: WhiteApplication Temperature: 5°C – 35°CSpecific Gravity: ~1.15 g/ccSolids by Weight: 50.5% – 55.9%Viscosity: 124–138 KUTensile Strength: 2.90 MPaElongation: up to 350%Water Resistance: Excellent (10 rating)Alkali Resistance: 8 ratingDrying Time (Touch Dry): 4–6 hoursRecoating Interval: 4–6 hoursShelf Life: 3 years (sealed containers)Packs Available: 4 L & 20 L
FAQ (Questions & Answers)Q1. What is the coverage of SmartCare Damp Proof Ultra?Horizontal (terrace): ~10 sq. ft per liter (2 coats)Vertical (fresh painting): ~25 sq. ft per literVertical (repainting): ~35–40 sq. ft per literQ2. Can it be applied on old waterproofing layers?Yes, if the old IPS/brick-bat coba/cementitious layer is sound and cleaned.Q3. How many coats are required?Typically 2 coats of Damp Proof Ultra are applied, plus a topcoat of Apex / Ultima for durability.Q4. What is its crack bridging capacity?Bridges cracks up to 2.5 mm.Q5. What is the warranty?10 years waterproofing warranty on terraces & walls (with Asian Paints topcoat).Q6. What is the shelf life?3 years in unopened, tightly sealed containers stored in a cool, dry place.Q7. What is the approx. price?Market price ranges from ₹4,500 – ₹5,200 per 20 L drum (varies by city & dealer).

91 000 74051 What it is: A high-quality, liquid polymer additive for cement, concrete, and plaster. It is designed to provide integral waterproofing and significantly enhance strength and durability.Key Advantages:Complete Waterproofing: Penetrates the mix to block water seepage from within, making structures like terraces and basements watertight.Strong Bonding: Excellent for repair work as it creates a powerful bond between old and new concrete surfaces.Crack Resistance: Improves flexibility, allowing the concrete to handle minor movements and temperature changes without cracking.Durability: Protects against weathering, corrosion, and chemical damage, increasing the structure's life.Easy Application: Simply add the liquid to your mixing water. No complex steps are required.
Ideal For:Waterproofing terraces, bathrooms, basements, swimming pools, and water tanks.Concrete repair and plastering work.Fixing leaking roofs and walls.Available in: 1 Ltr, 5 Ltr, and 20Ltr containers.
Questions & Answers (Q&A)Q1: What is the exact mixing ratio for a 50kg bag of cement?A: For a 50kg cement bag, use about 2.5 litres of Dr. Fixit 301 URP mixed with 10 litres of water. This replaces all the plain mixing water.Q2: Can I use it on an old, leaking terrace? How?A: Yes. First, remove any loose material and clean the surface. Then, apply a fresh layer of plaster or mortar that has been mixed with Dr. Fixit 301 URP. This will create a strong, waterproof barrier.Q3: Is it safe for drinking water tanks?A: Absolutely. Once the concrete or mortar has fully cured (after 28 days), it is completely non-toxic and safe for potable water.Q4: How is this better than a waterproof paint or coating?A: Paint sits on the surface and can peel or wear off. Dr. Fixit 301 URP waterproofs the entire concrete mix from the inside, making the protection permanent and more reliable.Q5: What is the shelf life?A: The product has a shelf life of 18 months from the date of manufacture if stored in a cool, dry place in its original sealed container.Q6: Are you an authorized dealer?A: Yes, we are an authorized distributor for Dr. Fixit products, ensuring you receive 100% genuine and fresh material.Q7: What are the payment and delivery terms?A: We accept all major online payment modes. We offer pan-India shipping. Delivery cost and time depend on your location and order size. Please message us for a precise quote.

 91 000 74051 SikaShield® P24 PE IN 3 mm is an APP modified bituminous waterproofing membrane with a thickness of 3 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with polyethylene foil, which ensures the bond of the overlying layer. The underside of the product has a burn-off film for easy torch-application

 91 000 74051 Tar Felt is a high-performance bitumen-based waterproofing membrane designed to provide long-lasting protection against water ingress, dampness, and moisture penetration in residential, commercial, and industrial structures. It is manufactured by impregnating and coating a strong base material such as felt, hessian, fiberglass, or polyester with refined bitumen, ensuring superior durability and adhesion.

Product Characteristics:

• Factory-coated with high-quality bitumen for enhanced waterproofing

• Supplied in roll form for easy handling and installation

• Excellent bonding with concrete, brickwork, and masonry surfaces

• Resistant to water, moisture, and varying weather conditions

Applications:

• Terrace and roof waterproofing systems

• Basement walls and foundation protection

• Bathrooms, toilets, and wet areas

• Industrial sheds, warehouses, and podium slabs

• Damp-proof courses (DPC) in masonry works

Types Available:

• Plain Tar Felt

• Hessian / Felt Base Tar Felt

• Fiberglass or Polyester Reinforced Tar Felt

• APP / SBS Modified Bitumen Tar Felt

Installation Method:

Tar Felt is applied on a clean, dry, and prepared surface using hot bitumen bonding or torch-on application. Sheets are laid with adequate overlaps to ensure seamless waterproofing. A protective layer such as cement screed, tiles, or reflective coating is recommended for extended service life.

Advantages:

• Proven and economical waterproofing solution

• High tensile strength and durability

• Effective barrier against leakage and dampness

• Suitable for both new construction and repair works

This product is ideal for projects requiring reliable, professional-grade waterproofing performance.

 91 000 74051 Tar Felt is a high-performance bitumen-based waterproofing membrane designed to provide long-lasting protection against water ingress, dampness, and moisture penetration in residential, commercial, and industrial structures. It is manufactured by impregnating and coating a strong base material such as felt, hessian, fiberglass, or polyester with refined bitumen, ensuring superior durability and adhesion.

Product Characteristics:

• Factory-coated with high-quality bitumen for enhanced waterproofing

• Supplied in roll form for easy handling and installation

• Excellent bonding with concrete, brickwork, and masonry surfaces

• Resistant to water, moisture, and varying weather conditions

Applications:

• Terrace and roof waterproofing systems

• Basement walls and foundation protection

• Bathrooms, toilets, and wet areas

• Industrial sheds, warehouses, and podium slabs

• Damp-proof courses (DPC) in masonry works

Types Available:

• Plain Tar Felt

• Hessian / Felt Base Tar Felt

• Fiberglass or Polyester Reinforced Tar Felt

• APP / SBS Modified Bitumen Tar Felt

Installation Method:

Tar Felt is applied on a clean, dry, and prepared surface using hot bitumen bonding or torch-on application. Sheets are laid with adequate overlaps to ensure seamless waterproofing. A protective layer such as cement screed, tiles, or reflective coating is recommended for extended service life.

Advantages:

• Proven and economical waterproofing solution

• High tensile strength and durability

• Effective barrier against leakage and dampness

• Suitable for both new construction and repair works

This product is ideal for projects requiring reliable, professional-grade waterproofing performance.

Tar Felt is a high-performance bitumen-based waterproofing membrane designed to provide long-lasting protection against water ingress, dampness, and moisture penetration in residential, commercial, and industrial structures. It is manufactured by impregnating and coating a strong base material such as felt, hessian, fiberglass, or polyester with refined bitumen, ensuring superior durability and adhesion.

Product Characteristics:

• Factory-coated with high-quality bitumen for enhanced waterproofing

• Supplied in roll form for easy handling and installation

• Excellent bonding with concrete, brickwork, and masonry surfaces

• Resistant to water, moisture, and varying weather conditions

Applications:

• Terrace and roof waterproofing systems

• Basement walls and foundation protection

• Bathrooms, toilets, and wet areas

• Industrial sheds, warehouses, and podium slabs

• Damp-proof courses (DPC) in masonry works

Types Available:

• Plain Tar Felt

• Hessian / Felt Base Tar Felt

• Fiberglass or Polyester Reinforced Tar Felt

• APP / SBS Modified Bitumen Tar Felt

Installation Method:

Tar Felt is applied on a clean, dry, and prepared surface using hot bitumen bonding or torch-on application. Sheets are laid with adequate overlaps to ensure seamless waterproofing. A protective layer such as cement screed, tiles, or reflective coating is recommended for extended service life.

Advantages:

• Proven and economical waterproofing solution

• High tensile strength and durability

• Effective barrier against leakage and dampness

• Suitable for both new construction and repair works

This product is ideal for projects requiring reliable, professional-grade waterproofing performance.

 91 000 74051 SikaShield® P24 PE IN 3 mm is an APP modified bituminous waterproofing membrane with a thickness of 3 mm. It is reinforced with a non-woven polyester fabric and is flexible at -2 °C. The top surface is coated with polyethylene foil, which ensures the bond of the overlying layer. The underside of the product has a burn-off film for easy torch-application

91 000 74051 Ultra-Durable Waterproofing for Flat Roofs & Terraces

CivilizeMart offers high-performance EPDM Rubber Membrane Roofing Solutions for structures that demand long-term, flexible, and weather-resistant protection. EPDM (Ethylene Propylene Diene Monomer) is a premium synthetic rubber sheet known for its exceptional waterproofing, UV resistance, and long life span.

✅ Why Choose EPDM Roofing?

•  100% Leak-Proof – Ideal for flat roofs and terraces

• Superior UV & Weather Resistance – Withstands harsh sun and rain

•  Eco-Friendly & Low Maintenance – Sustainable material with long service life

•  Heat & Cold Resistant – Performs well in extreme climates

•  Flexible & Durable – Accommodates thermal movement and cracks

 Best Suited For:

• Commercial & industrial rooftops

• Villas, apartments, and high-rise terraces

• Solar panel installation rooftops

• Warehouses & podium decks

• Exposed RCC slabs

 Our EPDM Installation Process:

1. Surface Cleaning & Slope Check

2. Primer Application (if required)

3. Laying of EPDM Membrane

4. Edge Detailing & Joint Sealing with Adhesive or Tapes

5. Leak Test & Final Quality Check

Available Thickness Options:

• 1.0 mm, 1.2 mm, 1.5 mm, and 2 mm membranes

• Available in single-ply rolls for fast and effective coverage

 “Built for decades. Trusted for protection.”
Go for EPDM – the gold standard in roof waterproofing.

 91 000 74051 Drainage cells are lightweight, interlocking modular units, typically made from recycled polypropylene, designed to create a crucial void space beneath surfaces for efficient sub-surface water management. This interconnected network allows water to flow horizontally towards drainage outlets, preventing waterlogging in green spaces, reducing hydrostatic pressure against structures like retaining walls and basements, and facilitating stormwater runoff in paved areas. Their high compressive strength supports overlying layers, while their ease of installation and environmental benefits, such as the use of recycled materials and contribution to sustainable drainage systems, make them a versatile and valuable component in various landscaping and construction applications.