Civilize Mart

 91 000 74051 Dr. Fixit Bathseal Select White is a single-component, ready-to-use acrylic-based flexible waterproofing coating specially formulated for bathrooms, wet zones, terraces, and internal & external walls. It has high elasticity with crack-bridging ability up to ~3 mm, excellent adhesion, durable waterproof membrane, and is applied directly with brush or roller. It protects surfaces from water seepage, dampness, and forms a seamless, white protective layer.
Key Features & BenefitsSingle component, saves time—no mixing of parts. Flexible acrylic membrane with high elongation (≈ 250 %) and crack-bridging up to ~3 mm. Low VOC content (environmentally better). Waterproof — prevents water infiltration in wet areas (bathrooms, terraces). White finish—good aesthetic, can brighten small areas.
Q1. Where is Bathseal Select White used?Bathrooms, wet zones, internal & external walls, terraces, places prone to dampness and water splash.Often used in sealing basements or on walls retained behind bathrooms.Q2. How many coats are needed and how to apply?Two coats are recommended. First coat allowed to dry, then apply second. Apply with brush/roller over clean, prepared surface.Q3. What crack width can it bridge?Up to around 3 mm crack-bridging capacity. Q4. Is it safe / what are the odor / VOC issues?Low VOC content. Single component formulation helps with ease of use.Q5. Approximate price?PLEASE VISIT CIVILIZEMART OR CONTACTQ6. What surface prep is required?Surfaces should be clean, free of loose particles, oil, mildew, dust.Repair large cracks first. Maybe prime if the substrate is very porous.

 91 000 74051 We have marked a remarkable position in the market by offering the best quality array of products to our clients.

 91 000 74051 Dr. Fixit Roofseal Classic Grey is a single-component, elastomeric waterproofing coating based on PU-Acrylic hybrid emulsion, reinforced with nano-fibers. Designed to form a seamless flexible membrane that protects roof surfaces from water seepage, heat, UV degradation, and structural micro-movement. Ideal for both new & old roofs, terraces, screeds, tile & mosaic surfaces, and provides a combination of waterproofing and heat insulation benefits.
Q1. Can I use Roofseal Classic Grey over an existing waterproofing layer?Yes, provided the existing layer is sound, clean, free of loose particles, moss/algae removed, and surface properly prepared. Minor cracks should be filled first. Q2. How many coats and how thick should each coat be?Typically two coats. The first coat is applied and allowed to dry (~4-6 hrs), then the second coat perpendicular to the first. Total dry film thickness (DFT) ~450-500 microns. Q3. How soon after application can I expose it to rainfall?Avoid rain for at least 48 hours after application to allow proper setting / curing. Surface temperature should be between ~10-35 °C during application. Q4. Is Roofseal Classic Grey suitable for heavy foot traffic?It is suitable for light foot traffic; for heavy traffic, protective screeds or foot-paths should be added. Q5. What is the approximate price for Gallon / Bucket SKU?For 20 L buckets, price is around Please visit CIVILIZEMART

 91 000 74051  Dr. Fixit Cipoxy 16D is a solventless, medium viscous, epoxy primer. Typical Application Cipoxy 16D is used as primer / sealer in conjunction with epoxy, PU and polyurea coating system.
 Features & Benefits   Ease of application: Easy to mix & apply by brush.  Penetration: Low viscosity penetrates into concrete surfaces.  Excellent Bonding: Bonds strongly to damp concrete surfaces moisture content up to 7% User friendly: Does not blister on curing.  Multipurpose : The most suitable epoxy primer for PU, polyurea and top coats Method of Application

 91 000 74051 Dr. Fixit Piditop 333 - Cementitious Floor Hardener is a high-performance, non-metallic floor hardener in dry powder form. It is applied to fresh concrete surfaces to create an extremely durable, dust-proof, and abrasion-resistant floor. Ideal for industrial areas, warehouses, parking garages, and ramps that face heavy vehicle traffic.
Key Benefits:
Extreme Durability: Creates a hard surface resistant to abrasion, scratches, and impacts.Resists Oil & Grease: Provides good resistance against oil and grease spills.Cost-Effective: Extends the life of concrete floors, reducing long-term maintenance costs.Dust-Proof: Eliminates surface dusting.Available in Colors: Comes in Natural, Light Grey, Dark Grey, and Green.Approximate Market Price: ₹399 - ₹499 per 25 kg bag (Please contact CIVILIZEMART for bulk pricing!)
Questions and Answers:Q1: What is Piditop 333 used for?A: It is used to harden and protect new concrete floors in areas with heavy traffic, such as warehouses, loading docks, parking garages, truck lanes, and industrial workshops.Q2: How is it applied?A: It is broadcast (sprinkled) evenly onto the surface of fresh concrete in two stages. After each application, the powder is worked into the surface using a power float or hand float to create a seamless, hardened top layer.Q3: How much product is needed per square meter?A: The dosage depends on traffic:Medium Traffic: 3-5 kg per square meterHeavy Traffic: 5-7 kg per square meterQ4: What is the approximate price?A: The approximate price for a 25kg bag is 399-499RS Contact us for the best rate, especially for larger projects.Q5: What are the main advantages over a plain concrete floor?A: It significantly increases the floor's surface hardness (Mohs scale 8-9), making it highly resistant to wear, abrasion, and dusting. It also offers better resistance to oils and grease.Q6: Is it available in colors?A: Yes, it is available in four colors: Natural, Light Grey, Dark Grey, and Green. This allows for both functional and decorative finishes.Q7: What is the shelf life?A: When stored in a sealed bag, away from direct sunlight, it has a shelf life of 12 months.Q8: What precautions should be taken during application?A:Apply in shaded conditions to prevent the concrete from drying too quickly.Control joints (grooves) must be cut into the floor after hardening to control cracking.Proper curing with water or a curing compound is essential for strength.Q9: Can it be applied on old concrete?A: No, Dr. Fixit Piditop 333 is designed to be applied only on fresh, wet concrete so it can integrate and cure as a single monolithic layer.

•  91 000 74051 It’s a polymer-modified tile adhesive (cementitious mortar), designed to fix tiles or natural stone on floors and walls — both interior and exterior. 

• It’s especially suited for large-format tiles, heavy tiles, porcelain, natural stone, and even tile-on-tile applications. 

�� Key Features & Benefits

• Highly deformable / flexible: can absorb structural movements or thermal expansions without cracking — useful in buildings where there may be shifts or vibrations. 

• Strong bond strength: good shear and tensile adhesion, ensuring tiles stay fixed firmly even on demanding surfaces. 

• Versatile surfaces: works over concrete, cement mortar, plaster, existing tile/stone surfaces, etc. Thin-bed to medium-bed applications: you can apply from thin to modest bed thickness (typical up to ~15 mm). 

• Usable in wet areas: suitable for bathrooms, balconies, even swimming-pool areas (for appropriate tiles/stones), since it has good water- and moisture-resistance once cured.

�� Typical Use Cases

• Laying ceramic, vitrified, or porcelain tiles — on floors or walls.

• Installing natural stone tiles or large-format tiles (where regular thin-set mortars may crack).

• Renovation work where you may want to tile over existing tiles or stones.

• Wet-area flooring/walls (bathrooms, balconies, terraces) or high-traffic areas (lobbies, kitchens, external facades) — because of its strong adhesion and flexibility

 91 000 74051 Dr. Fixit Bathseal Select White is a single-component, ready-to-use acrylic-based flexible waterproofing coating specially formulated for bathrooms, wet zones, terraces, and internal & external walls. It has high elasticity with crack-bridging ability up to ~3 mm, excellent adhesion, durable waterproof membrane, and is applied directly with brush or roller. It protects surfaces from water seepage, dampness, and forms a seamless, white protective layer.
Key Features & BenefitsSingle component, saves time—no mixing of parts. Flexible acrylic membrane with high elongation (≈ 250 %) and crack-bridging up to ~3 mm. Low VOC content (environmentally better). Waterproof — prevents water infiltration in wet areas (bathrooms, terraces). White finish—good aesthetic, can brighten small areas.
Q1. Where is Bathseal Select White used?Bathrooms, wet zones, internal & external walls, terraces, places prone to dampness and water splash.Often used in sealing basements or on walls retained behind bathrooms.Q2. How many coats are needed and how to apply?Two coats are recommended. First coat allowed to dry, then apply second. Apply with brush/roller over clean, prepared surface.Q3. What crack width can it bridge?Up to around 3 mm crack-bridging capacity. Q4. Is it safe / what are the odor / VOC issues?Low VOC content. Single component formulation helps with ease of use.Q5. Approximate price?PLEASE VISIT CIVILIZEMART OR CONTACTQ6. What surface prep is required?Surfaces should be clean, free of loose particles, oil, mildew, dust.Repair large cracks first. Maybe prime if the substrate is very porous.

 91 000 74051 Dr. Fixit Bathseal Select White is a single-component, ready-to-use acrylic-based flexible waterproofing coating specially formulated for bathrooms, wet zones, terraces, and internal & external walls. It has high elasticity with crack-bridging ability up to ~3 mm, excellent adhesion, durable waterproof membrane, and is applied directly with brush or roller. It protects surfaces from water seepage, dampness, and forms a seamless, white protective layer.
Key Features & BenefitsSingle component, saves time—no mixing of parts. Flexible acrylic membrane with high elongation (≈ 250 %) and crack-bridging up to ~3 mm. Low VOC content (environmentally better). Waterproof — prevents water infiltration in wet areas (bathrooms, terraces). White finish—good aesthetic, can brighten small areas.
Q1. Where is Bathseal Select White used?Bathrooms, wet zones, internal & external walls, terraces, places prone to dampness and water splash.Often used in sealing basements or on walls retained behind bathrooms.Q2. How many coats are needed and how to apply?Two coats are recommended. First coat allowed to dry, then apply second. Apply with brush/roller over clean, prepared surface.Q3. What crack width can it bridge?Up to around 3 mm crack-bridging capacity. Q4. Is it safe / what are the odor / VOC issues?Low VOC content. Single component formulation helps with ease of use.Q5. Approximate price?PLEASE VISIT CIVILIZEMART OR CONTACTQ6. What surface prep is required?Surfaces should be clean, free of loose particles, oil, mildew, dust.Repair large cracks first. Maybe prime if the substrate is very porous.

SUNPRUFE PU1K is a single component, liquid applied, moisturecured, polyurethane elastomeric membrane for waterproofing andsealing of various kinds of surfaces. The product cures to a rubber likefinish with excellent flexibility and chemical resistance properties.

 91 000 74051 Injection packers are ports or fittings inserted into drilled holes in concrete, masonry or other structural elements so that injection materials (epoxy, polyurethane, acrylate gels etc.) can be pumped into cracks, voids, or joints. They act as sealed access points so the injection grout or resin enters the structure under pressure without escaping.
Important Specifications / What to ChooseDiameter of packer: depends on how much flow you need and what crack size / pressure. Common diameters ~ 6 mm, 10 mm, 13 mm, 16 mm etc. Length / Shaft length: Longer packers help in weak or deteriorated concrete so they grip well in the hole without blowing out. Short ones are fine for shallow cracks. Valve type / fitting type: Zerk type vs Button-Head vs Anti-Return Valve. Anti-return valves help prevent backflow and ease multiple injections. Button-head or flat-head help with fast hose connection. Material strength & corrosion resistance: Steel gives high strength and good pressure resistance; aluminum/brass cheaper; plastic lighter. Choose depending on environment and pressure.
Q. What diameter should I choose? Depends on volume / flow and crack/void size; 10-13 mm common for concrete crack injection.Q. Can these packers be reused? Some metal packers may be reusable; plastic ones often single use.Q. What injection materials can be used? Epoxy, PU, acrylate, silicate etc. Check compatibility with valve and packer material.Q. How to finish after injection? Pull out or break off the packer stem if needed, seal hole with patch repair mortar.

91 000 74051 Dr. Fixit Corner Joint Tape is a specially coated 3-ply elastic tape with high extension in cross direction and rigid lengthwise, thin, high tenacity system component which when used in combination with Dr. Fixit® waterproofing products reduces the risk of leaks through potential cracking locations at wall corners, floor-to-wall connections, pipe entries etc.

 91 000 74051 Dr.Fixit RepairPro Rust Remover is a ready-to-use, chloride-free aqueous solution designed to effectively dissolve rust and corrosion from steel surfaces. Ideal for minor to moderate corrosion on steel rebars and mild-steel structures, it ensures a clean, firm surface before further treatment or coating.
Key Advantages:Convenient & ready-to-use—applies easily with a brush or swabDeep penetration, even in hard-to-reach areasChloride-free formula prevents further corrosionEconomical coverage—approximately 15–20 m² per litre
Q1. Where is this rust remover typically used?Primarily on rusted steel rebars, construction shuttering plates, pipelines, tanks, and other corroded mild-steel surfaces.Q2. How should it be applied?Remove loose rust via wire brusher steel brush or grinding.Apply the liquid with a brush or cotton swab and let it react for 15–30 minutes.Wipe off dissolved rust.Rinse thoroughly with water to remove acidic residue.Q3. Why is a chloride-free formulation important?Chloride causes corrosion of steel reinforcement. A chloride-free formula removes rust safely without compromising future structural integrity.Q4. What coverage can be expected?You'll get around 15–20 m² per litre, depending on the substrate surface.Q5. Shelf life and storage conditions?Shelf life is 24 months when kept sealed and stored in a cool, dry place.Q6. Packaging and purity?Available in 1 L bottles (some suppliers offer 500 ml), with 98–99% purity typical to industrial-grade formulations.Q7. What’s the price range?Prices vary by pack size and location—contact CivilizeMart for best bulk pricing.

91 000 74051 Sikagard®-67 is a water based, solvent free, odourless, epoxy resin protective coating.

 91 000 74051  SikaTop®-107 Seal IN is a two part, acrylic polymer modified cementitious liquid applied waterproofing coating system. It comprises of a liquid polymer and a cement based mix incorporating special admixtures. It is applied to concrete and mortar to prevent water in filtration.

 91 000 74051 Dr. Fixit Flexi PU 270(I) A high-performance, solvent-based, one-component, polyurethane waterproofing membrane. It is liquid-applied, cures upon contact with air moisture, and forms a highly flexible, seamless, and elastic protective layer.
 AquaArm C-35 is a powder based integral crystalline water proofing system. It consists of Cement and various active chemicals. These active chemicals react with water and bye products of cement hydration which cause a catalytic reaction to form non soluble crystals. These crystals block the pore and capillaries of the concrete and thus concrete becomes permanently sealed from penetration of water. It conforms to ACI-212 3R-10 PRAH Category, BS 8102, IS 16471 Type-B Water Proofing System

 SUNPLEX is an admixture in a powder form which compensates shrinkage in cement based mixes like grout, mortar and concrete. The stabilizer of the admixture provides homogeneity, counteracts intrinsic shrinkage and settling characteristics while the plasticiser helps to achieve high workability.

 91 000 74051 CivilizeMart offers advanced waterproofing solutions to eliminate damp walls caused by moisture seepage, capillary action, and surface cracks. Using high-performance polymer coatings, anti-damp sealants, and penetrating primers, we treat the root cause of dampness and create a strong moisture-resistant barrier. Our experts inspect the wall, repair cracks, and apply multi-layer protection to stop water absorption and prevent future damage.With precise application techniques and long-lasting materials, CivilizeMart ensures clean, dry, and fungus-free walls throughout the year. Our damp wall waterproofing improves wall strength, prevents paint peeling, and enhances indoor air quality. Choose CivilizeMart for a durable, effective solution that keeps your walls fresh and moisture-free for years.
1. What causes damp walls?Damp walls are caused by moisture seepage, cracks, poor drainage, and rising damp from the ground.
2. How does CivilizeMart fix damp walls?CivilizeMart uses anti-damp sealants, polymer coatings, and crack treatments to block moisture at the source.
3. Is damp wall waterproofing long-lasting?Yes, CivilizeMart’s treatment lasts 5–8 years, depending on wall exposure and maintenance.
4. Can damp walls be repaired without breaking the plaster?Yes, many CivilizeMart treatments are surface-based and do not require major breakage.
5. How long does the waterproofing process take?Most damp wall waterproofing work is completed within 1 day, depending on the area size.
6. Does the treatment stop fungus and peeling paint?Yes, CivilizeMart’s waterproofing prevents moisture entry, stopping fungus growth and paint damage.

 91 000 74051 Mapei Idrostop Mastic A one-component, thixotropic, solvent-free adhesive made from silliated polymers. It is specifically designed for bonding Mapei Idrostop hydrophilic expanding rubber waterstop profiles.Primary Function: To provide a high-tack, rapid-hardening bond for installing Idrostop waterstop strips in concrete construction joints, ensuring a perfect and permanent seal against water ingress.
Key Features & Benefits (from TDS):High Initial Tack: Holds the Idrostop profile in place immediately after application.Rapid Hardening: Sets by reacting with air moisture, achieving initial hardening in 25 min - 1.5 hrs.Thixotropic: Perfect for application on both horizontal and vertical surfaces without sagging.Solvent-Free & Low VOC: Does not give off unpleasant smells and is certified EC1 Plus for very low emissions.Versatile Adhesion: Bonds to concrete, metal, and plastic surfaces.
Q1: What is this product specifically used for?A: It is used exclusively for bonding Mapei Idrostop hydrophilic waterstop strips in concrete construction joints to create a permanent waterproof seal. It is not a general-purpose adhesive.Q2: How is it applied?A:Prepare Surface: Ensure the concrete/metal/plastic surface is clean, sound, and free of oil, grease, or laitance.Load Cartridge: Use a standard sealant gun with the 300ml cartridge and provided nozzle.Apply Bead: Extrude a continuous bead of mastic onto the substrate.Place Idrostop: Immediately press the Idrostop profile onto the mastic, moving it slightly to ensure full contact and adhesion.Concrete Pouring: Concrete can be poured after 24 hours.Q3: What is the coverage or consumption?A: Consumption is approximately 300 ml of mastic for every 5 meters of Idrostop profile.Q4: What are the key setting times?A (at +23°C & 50% RH):Dust Dry: 10 minutesAdjustment Time: 5 minutesInitial Hardening: 25 minutes (on damp substrates) to 1.5 hours (on dry substrates)Final Hardening: 24 hoursQ5: What is the temperature range for application?A: It can only be applied when the temperature is between +5°C and +35°C.Q6: What is the shelf life?A: 18 months from the date of manufacture when stored in its original, unopened packaging in a dry, cool place.Q7: Is it safe to use?A: It is solvent-free and not classified as hazardous. However, as a professional product, it is recommended to wear protective gloves and goggles during handling. Always refer to the latest Safety Data Sheet (SDS).Q8: How do I clean tools?A: Clean wet mastic with solvents like ethyl acetate, petrol, or toluene. Once hardened, it can only be removed mechanically.

 91 000 74051  CivilizeMart delivers premium wall waterproofing solutions using advanced polymer-bonded and elastomeric coatings engineered to block moisture, seal micro-cracks, and prevent structural deterioration.  Our team applies high-performance chemicals with nano-shield technology, ensuring superior adhesion and long-lasting resistance against seepage, damp patches, and fungal growth. With precision surface preparation and fast, efficient application, CivilizeMart guarantees a durable, leak-proof finish for both interior and exterior walls.  Choose our expert waterproofing service to strengthen your walls, extend their lifespan, and keep your space fresh, clean, and protected throughout the year
1. What is wall waterproofing?Wall waterproofing is a protective treatment applied to interior or exterior walls to prevent moisture, seepage, dampness, and fungal growth. It strengthens the wall surface and increases durability.
2. Why is waterproofing important for my home or building?
Waterproofing stops water penetration that can weaken walls, cause cracks, and create unhealthy damp patches. It also helps maintain structural strength and improves the overall life of the property.
3. How does CivilizeMart waterproof walls?
CivilizeMart uses advanced polymer-based coatings, elastomeric chemicals, and crack-sealants. Our experts prepare the surface, fill cracks, and apply multiple protective layers for a long-lasting, leak-proof finish.
4. How long does the waterproofing process take?
Depending on the wall condition, the process usually takes 1–2 days, including inspection, preparation, coating, and drying time.
5. How long will the waterproofing last?
With proper application and quality materials, CivilizeMart waterproofing typically lasts 5–8 years, depending on weather conditions and wall exposure.
6. Can waterproofing be applied to already damp or damaged walls?
Yes. CivilizeMart professionals first treat the dampness, repair the damage, and then apply waterproof coatings to ensure strong adhesion and long-term protection.

 91 000 74051 Sunanda Sunkote WP+ is a single-component, elastomeric, water-based acrylic waterproof coating that forms a robust, elastic membrane capable of resisting water ingress, UV damage, and microbial growth. Designed for diverse RCC surfaces, it bridges cracks up to 2 mm while allowing the substrate to breathe.
Key Features:High-build, elastomeric liquid-applied membrane with excellent crack-bridging capabilityUV-resistant, anti-fungal, and breathable coatingHigh tensile strength, tear resistance, and exceptional substrate adhesionNon-toxic and environmentally friendly
Ideal For:Roofs (flat or sloping), chajjas, parapet and external walls, sunken areas, toiletsBoth new and existing concrete surfaces
Application Method:
Thoroughly clean and prepare the surface—remove dust, oil, loose particles, and repair defects.Apply a primer if specified (e.g., Polyalk WP or Sunprime WP).Apply two coats of Sunkote WP+, with the second coat perpendicular to the first for uniform coverage.Allow 24–48 hours curing before any protective screed.
Q1. What is Sunkote WP+ ideal for?It’s a single-component acrylic waterproofing membrane suited for RCC surfaces like roofs, parapet walls, balconies, and sunken areas—bridging up to 2 mm cracks.Q2. How is it applied?Ensure the surface is clean and primed if needed. Apply two coats with a brush, roller, or spray, ensuring the second coat is perpendicular to the first, for even coverage.Q3. What makes it durable?It’s UV-resistant, anti-fungal, elastomeric, and breathable, providing long-term waterproof protection and crack-bridging flexibility.Q4. What are pack sizes and shelf life?Packaging: ~20 kg per bucketShelf Life: ~12 months when stored sealedQ5. What is its approximate price?Roughly ₹5,550–₹6,287 per litre (20 kg) depending on supplier and region.Q6. Any special advantages?In addition to being a breathable, non-toxic coating, it allows the substrate to safely release moisture while providing strong adhesion and protection against environmental wear.

91 000 74051 SmartCare Epoxy TriBlock - Food Grade Epoxy Waterproofing Coating is a high-performance, three-component epoxy-cement coating designed for permanent waterproofing of water storage structures. It is certified safe for potable (drinking) water, making it ideal for overhead tanks, sumps, and swimming pools. It provides a seamless, strong, and microbial-resistant barrier.
Key Benefits:Safe for Drinking Water: Certified food-grade by CFTRI, safe for overhead and underground water tanks.Superior Adhesion: Excellent bond to concrete and cementitious surfaces.Strong Waterproofing: Withstands high water pressure (up to 4 bars).Durable & Microbial Resistant: Creates a tough, long-lasting coating that resists microbial growth.2-Year Warranty: Backed by a warranty for cementitious water-retaining structures.
Approximate Market Price: 1599 - 3000 per 5 kg kit (Please contact CIVILIZEMART for the best price!)
Questions and Answers-:Q1: What is the main use of Epoxy TriBlock?A: It is specifically designed for waterproofing structures that store water. Its primary uses are for drinking water tanks (overhead and underground), sumps, and swimming pools.Q2: Is it safe for drinking water tanks?A: Yes, absolutely. A key feature is its food-grade certification from CFTRI (a government lab), making it perfectly safe for storing potable water.Q3: How many components does it have and how is it mixed?A: It is a three-component system (Base, Hardener, Filler). The mixing ratio by weight is Base : Hardener : Filler : Water = 17 : 18 : 65 : 20. You must mix all components thoroughly as per instructions.Q4: What is the coverage area?A: For two coats, the coverage is approximately 28 square feet per kilogram. A standard 4.2 kg kit will cover about 15-20 square feet with two coats, depending on surface roughness.Q5: What is the approximate price?A: The approximate price for a 5 kg kit is 1599 TO 3000. Please contact us CIVILIZEMART for the exact price and availability.Q6: How long does it take to dry?A: The surface dries in about 4-6 hours. You can apply the second coat after 4-5 hours. The mixed product has a pot life of 60 minutes.Q7: Can it be applied on a damp surface?A: Yes, it is recommended that the surface be in a Saturated Surface Dry (SSD) condition—damp but without any standing water.Q8: What is the warranty?A: The product comes with a 2-year warranty for cementitious water-retaining structures when applied as per guidelines.Q9: What precautions should be taken during application?A:Do not mix partial quantities; always mix the full pack.Wear gloves and eye protection.Ensure the surface is clean, sound, and free from old paint or coatings.

91 000 74051Advanced Waterproofing for Long-Lasting Terrace Protection CivilizeMart offers high-performance Polyurethane (PU) Terrace Waterproofing Services for homes, apartments, and commercial buildings. PU coatings are known for their flexibility, seamless finish, and superior water resistance, making them ideal for exposed terraces and rooftops.
✅ Why Choose PU Waterproofing?100% Seamless Waterproof Layer – No cracks, no gaps, no seepage
Flexible & Crack-Resistant – Expands and contracts with the surface
UV-Resistant – Withstands sun exposure without damage
 Durable & Long-Lasting – Up to 10 years of protection
 Ideal for Any Terrace Surface – RCC, screed, tiled, or metal terraces
 Where It’s Used:Open terraces
Balconies & podium decks
Roof slabs
Utility/service areas
Commercial and industrial rooftops
 Our PU Waterproofing Process:Site Inspection & Cleaning
Crack Filling & Surface Preparation
Primer Application
PU Waterproofing Membrane Coating (2–3 coats)
UV Protection Layer or Screeding (optional)
Leak Test & Handover
 What Problems It Solves:Water leakage into ceilings
Hairline cracks on terrace surface
Fungal growth or dampness
UV and weather-related surface damage
“Smart waterproofing for modern structures—PU keeps your terrace dry and durable.

 91 000 74051 SmartCare CemBoost 200 is an integral liquid waterproofing compound and cement modifier designed to enhance the performance of cement, mortar, plaster, and concrete mixes. It strengthens the mix, increases durability, and provides improved water resistance — making it ideal for both structural waterproofing and enhanced concrete performance. 

�� Key Features

• Integral Waterproofing: Reduces water permeability of cement and concrete, protecting structures against moisture ingress. 

• Improves Strength: Enhances compressive strength even beyond standard mix performance.  

• Better Workability: Adds cohesion and plasticizing action to fresh concrete/mortar mixes, making them easier to work with. 

• Controls Shrinkage: Helps resist cracking from drying shrinkage. 

• Compatible: Suitable for concrete, mortar, plaster, brickwork, screeds, and more. 

• Corrosion Resistance: Reduces risk of reinforcement corrosion by limiting water and chloride penetration. 

��️ Recommended Uses

• Waterproofing water-retaining structures like tanks and sumps. 

• Basements, roofs, and slabs to prevent moisture ingress.  

• Bathroom & wet area waterproofing in plaster or mortar layers. 

• Bricklaying mortar to enhance water resistance and strength. 

• Structural concrete mixes and plasters needing improved durability. 

�� Packaging Options

• Smartcare Cemboost 200 5 L – smaller pack for site use

• 10 L Asian Paints Smartcare Cemboost 200 – medium work projects

• 20 L Asian Paints Smartcare Cemboost 200 – most common contractor size

• Smartcare Cemboost 200 Bulk Pack – larger bulk supply

• 1 Tons 20 L Asian Paints Smartcare Cemboost 200 – for high-volume requirements

�� How It’s Used

1. Mixing: Add the recommended dose of CemBoost 200 into mixing water before adding cement and aggregates.

2. Concrete & Mortar: Use in concrete, plaster, or mortar mixes where enhanced waterproofing and strength are desired. 

3. Curing: Follow standard curing practices after placement to develop full strength and waterproofing benefits. 

��️ Benefits at a Glance

 91 000 74051 Dr. Fixit Primeseal is water-based primer composed of acrylic emulsion polymer, properly selected fine fillers, white pigments & additives in water as a medium. It is used as primer over exterior & interior building walls before application of water based paints.

 91 000 74051 Dr. Fixit Piditop 333 - Cementitious Floor Hardener is a high-performance, non-metallic floor hardener in dry powder form. It is applied to fresh concrete surfaces to create an extremely durable, dust-proof, and abrasion-resistant floor. Ideal for industrial areas, warehouses, parking garages, and ramps that face heavy vehicle traffic.
Key Benefits:
Extreme Durability: Creates a hard surface resistant to abrasion, scratches, and impacts.Resists Oil & Grease: Provides good resistance against oil and grease spills.Cost-Effective: Extends the life of concrete floors, reducing long-term maintenance costs.Dust-Proof: Eliminates surface dusting.Available in Colors: Comes in Natural, Light Grey, Dark Grey, and Green.Approximate Market Price: ₹399 - ₹499 per 25 kg bag (Please contact CIVILIZEMART for bulk pricing!)
Questions and Answers:Q1: What is Piditop 333 used for?A: It is used to harden and protect new concrete floors in areas with heavy traffic, such as warehouses, loading docks, parking garages, truck lanes, and industrial workshops.Q2: How is it applied?A: It is broadcast (sprinkled) evenly onto the surface of fresh concrete in two stages. After each application, the powder is worked into the surface using a power float or hand float to create a seamless, hardened top layer.Q3: How much product is needed per square meter?A: The dosage depends on traffic:Medium Traffic: 3-5 kg per square meterHeavy Traffic: 5-7 kg per square meterQ4: What is the approximate price?A: The approximate price for a 25kg bag is 399-499RS Contact us for the best rate, especially for larger projects.Q5: What are the main advantages over a plain concrete floor?A: It significantly increases the floor's surface hardness (Mohs scale 8-9), making it highly resistant to wear, abrasion, and dusting. It also offers better resistance to oils and grease.Q6: Is it available in colors?A: Yes, it is available in four colors: Natural, Light Grey, Dark Grey, and Green. This allows for both functional and decorative finishes.Q7: What is the shelf life?A: When stored in a sealed bag, away from direct sunlight, it has a shelf life of 12 months.Q8: What precautions should be taken during application?A:Apply in shaded conditions to prevent the concrete from drying too quickly.Control joints (grooves) must be cut into the floor after hardening to control cracking.Proper curing with water or a curing compound is essential for strength.Q9: Can it be applied on old concrete?A: No, Dr. Fixit Piditop 333 is designed to be applied only on fresh, wet concrete so it can integrate and cure as a single monolithic layer.

 91 000 74051 Dr. Fixit Pidigrout 10M - High-Strength, Non-Shrink Grout is a ready-to-use, free-flowing cementitious grout that provides very high strength and does not shrink after setting. It is specially designed for heavy-duty applications where a strong, stable, and reliable foundation is critical, such as under heavy machinery, bridge bearings, and structural columns.
Key Benefits:
High Strength: Achieves compressive strength of over 800 ksc (approx. 80 MPa) in 28 days.Non-Shrink: Expands slightly upon setting to ensure a perfect, full-contact bond with the base.Free-Flowing: Easily flows into tight spaces and under base plates without needing vibration.Ready-to-Use: Just add water and mix for easy application.Heavy-Duty: Ideal for machinery foundations, precast structures, and turbine bases.Approximate Market Price: 399 - 499 per 25 kg bag (Please contact for the best bulk price!)
Questions and Answers:Q1: What is Pidigrout 10M used for?A: It is used for grouting applications that require high strength and stability. Common uses include fixing heavy machinery bases, bridge bearing pads, boiler foundations, turbine generator plates, and structural columns.Q2: How much water should be added to a 25kg bag?A: For a free-flowing consistency, add 4.0 to 4.5 liters of clean water per 25kg bag. For a drier, trowelable mix, use 3.25 to 3.5 liters of water. Never add extra water.Q3: What is the coverage or yield from one bag?A: One 25kg bag mixed with water yields approximately 12.5 liters of grout.Q4: What is the approximate price?A: The approximate price for a 25kg bag is 499 TO 518. Contact CIVILIZEMART us for a precise quote, especially for bulk orders.Q5: How strong is this grout?A: It is very high-strength. It achieves over 350 ksc in 24 hours and reaches a final compressive strength of over 800 ksc (80 MPa) in 28 days.Q6: Does it shrink or expand?A: It is a non-shrink grout. It undergoes a slight controlled expansion during setting to compensate for any shrinkage, ensuring a tight, void-free fill under the base plate.Q7: What is the shelf life?A: When stored in a sealed container in a shaded area, it has a shelf life of up to 1 year.Q8: Can it be used for deep fills?A: Yes, for fills deeper than 75mm, you can add approximately 10 kg of clean, washed 10mm crushed aggregates to each 25kg bag of grout to reduce heat generation and cost.Q9: What precautions should be taken during application?A:Soak the base surface with water for 24 hours before grouting.Ensure the shuttering (formwork) is completely leak-proof.Do not add extra water to the mix.Cure the grout after placement by covering it with wet jute bags or using a curing compound.

 91 000 74051 Waterproofing Powder Products are high-performance waterproofing solutions designed to provide long-lasting protection against water leakage, seepage, dampness, and moisture. These products are manufactured using advanced chemical technology to ensure superior bonding, flexibility, and durability.

They are suitable for residential, commercial, and industrial applications, offering excellent resistance to water pressure, UV exposure, cracks, and weather changes.

��️ Applications / Uses:

• Roof & Terrace Waterproofing

• Bathrooms & Toilets

• Balconies & Podiums

• Basements & Foundations

• Water Tanks & Swimming Pools

• Parking Decks & Industrial Floors

• Expansion Joints & Structural Cracks

⭐ Key Features:

✔ High waterproofing efficiency
✔ Excellent adhesion on concrete & masonry
✔ Crack-bridging and flexible performance
✔ UV & weather resistant
✔ Long service life
✔ Suitable for positive & negative water pressure
✔ Easy application & low maintenance

�� Available Types:

• Cementitious Waterproofing Coatings

• Liquid Waterproofing Membranes (Acrylic / PU)

• Bituminous Waterproofing Systems

• Crystalline Waterproofing

• PU & MS Polymer Sealants

• Epoxy Grouts & Heavy-Duty Waterproofing Systems

�� Recommended Areas:

Residential Buildings, Commercial Complexes, Hospitals, Hotels, Shopping Malls, Industrial Structures, Warehouses.

�� Packaging:

Available in multiple packing sizes as per requirement.

�� Supply Ability:

Pan India Delivery Available

�� Price:

Best Market Price | Bulk Quantity Available

�� Tags for Indiamart (SEO):
Waterproofing Chemicals, Waterproofing Power Products, Roof Waterproofing, Terrace Waterproofing, Basement Waterproofing, Industrial Waterproofing, Waterproofing Solutions

 91 000 74051 Dr. Fixit Piditop 333 - Cementitious Floor Hardener is a high-performance, non-metallic floor hardener in dry powder form. It is applied to fresh concrete surfaces to create an extremely durable, dust-proof, and abrasion-resistant floor. Ideal for industrial areas, warehouses, parking garages, and ramps that face heavy vehicle traffic.
Key Benefits:
Extreme Durability: Creates a hard surface resistant to abrasion, scratches, and impacts.Resists Oil & Grease: Provides good resistance against oil and grease spills.Cost-Effective: Extends the life of concrete floors, reducing long-term maintenance costs.Dust-Proof: Eliminates surface dusting.Available in Colors: Comes in Natural, Light Grey, Dark Grey, and Green.Approximate Market Price: ₹399 - ₹499 per 25 kg bag (Please contact CIVILIZEMART for bulk pricing!)
Questions and Answers:Q1: What is Piditop 333 used for?A: It is used to harden and protect new concrete floors in areas with heavy traffic, such as warehouses, loading docks, parking garages, truck lanes, and industrial workshops.Q2: How is it applied?A: It is broadcast (sprinkled) evenly onto the surface of fresh concrete in two stages. After each application, the powder is worked into the surface using a power float or hand float to create a seamless, hardened top layer.Q3: How much product is needed per square meter?A: The dosage depends on traffic:Medium Traffic: 3-5 kg per square meterHeavy Traffic: 5-7 kg per square meterQ4: What is the approximate price?A: The approximate price for a 25kg bag is 399-499RS Contact us for the best rate, especially for larger projects.Q5: What are the main advantages over a plain concrete floor?A: It significantly increases the floor's surface hardness (Mohs scale 8-9), making it highly resistant to wear, abrasion, and dusting. It also offers better resistance to oils and grease.Q6: Is it available in colors?A: Yes, it is available in four colors: Natural, Light Grey, Dark Grey, and Green. This allows for both functional and decorative finishes.Q7: What is the shelf life?A: When stored in a sealed bag, away from direct sunlight, it has a shelf life of 12 months.Q8: What precautions should be taken during application?A:Apply in shaded conditions to prevent the concrete from drying too quickly.Control joints (grooves) must be cut into the floor after hardening to control cracking.Proper curing with water or a curing compound is essential for strength.Q9: Can it be applied on old concrete?A: No, Dr. Fixit Piditop 333 is designed to be applied only on fresh, wet concrete so it can integrate and cure as a single monolithic layer.

 91 000 74051 Dr. Fixit Piditop 333 - Cementitious Floor Hardener is a high-performance, non-metallic floor hardener in dry powder form. It is applied to fresh concrete surfaces to create an extremely durable, dust-proof, and abrasion-resistant floor. Ideal for industrial areas, warehouses, parking garages, and ramps that face heavy vehicle traffic.
Key Benefits:
Extreme Durability: Creates a hard surface resistant to abrasion, scratches, and impacts.Resists Oil & Grease: Provides good resistance against oil and grease spills.Cost-Effective: Extends the life of concrete floors, reducing long-term maintenance costs.Dust-Proof: Eliminates surface dusting.Available in Colors: Comes in Natural, Light Grey, Dark Grey, and Green.Approximate Market Price: ₹399 - ₹499 per 25 kg bag (Please contact CIVILIZEMART for bulk pricing!)
Questions and Answers:Q1: What is Piditop 333 used for?A: It is used to harden and protect new concrete floors in areas with heavy traffic, such as warehouses, loading docks, parking garages, truck lanes, and industrial workshops.Q2: How is it applied?A: It is broadcast (sprinkled) evenly onto the surface of fresh concrete in two stages. After each application, the powder is worked into the surface using a power float or hand float to create a seamless, hardened top layer.Q3: How much product is needed per square meter?A: The dosage depends on traffic:Medium Traffic: 3-5 kg per square meterHeavy Traffic: 5-7 kg per square meterQ4: What is the approximate price?A: The approximate price for a 25kg bag is 399-499RS Contact us for the best rate, especially for larger projects.Q5: What are the main advantages over a plain concrete floor?A: It significantly increases the floor's surface hardness (Mohs scale 8-9), making it highly resistant to wear, abrasion, and dusting. It also offers better resistance to oils and grease.Q6: Is it available in colors?A: Yes, it is available in four colors: Natural, Light Grey, Dark Grey, and Green. This allows for both functional and decorative finishes.Q7: What is the shelf life?A: When stored in a sealed bag, away from direct sunlight, it has a shelf life of 12 months.Q8: What precautions should be taken during application?A:Apply in shaded conditions to prevent the concrete from drying too quickly.Control joints (grooves) must be cut into the floor after hardening to control cracking.Proper curing with water or a curing compound is essential for strength.Q9: Can it be applied on old concrete?A: No, Dr. Fixit Piditop 333 is designed to be applied only on fresh, wet concrete so it can integrate and cure as a single monolithic layer.

 91 000 74051 Dr. Fixit Fastflex is a two component acrylic cementitious coating system for waterproofing of wet areas and any water retaining structures such as swimming pools and water features. It provides strong bonding and excellent resistant to hydrostatic water pressure by forming highly elastic seamless coating over the applied concrete surfaces.

 91 000 74051 SmartCare CemBoost 200 is an integral liquid waterproofing compound and cement modifier designed to enhance the performance of cement, mortar, plaster, and concrete mixes. It strengthens the mix, increases durability, and provides improved water resistance — making it ideal for both structural waterproofing and enhanced concrete performance. 

�� Key Features

• Integral Waterproofing: Reduces water permeability of cement and concrete, protecting structures against moisture ingress. 

• Improves Strength: Enhances compressive strength even beyond standard mix performance.  

• Better Workability: Adds cohesion and plasticizing action to fresh concrete/mortar mixes, making them easier to work with. 

• Controls Shrinkage: Helps resist cracking from drying shrinkage. 

• Compatible: Suitable for concrete, mortar, plaster, brickwork, screeds, and more. 

• Corrosion Resistance: Reduces risk of reinforcement corrosion by limiting water and chloride penetration. 

��️ Recommended Uses

• Waterproofing water-retaining structures like tanks and sumps. 

• Basements, roofs, and slabs to prevent moisture ingress.  

• Bathroom & wet area waterproofing in plaster or mortar layers. 

• Bricklaying mortar to enhance water resistance and strength. 

• Structural concrete mixes and plasters needing improved durability. 

�� Packaging Options

• Smartcare Cemboost 200 5 L – smaller pack for site use

• 10 L Asian Paints Smartcare Cemboost 200 – medium work projects

• 20 L Asian Paints Smartcare Cemboost 200 – most common contractor size

• Smartcare Cemboost 200 Bulk Pack – larger bulk supply

• 1 Tons 20 L Asian Paints Smartcare Cemboost 200 – for high-volume requirements

�� How It’s Used

1. Mixing: Add the recommended dose of CemBoost 200 into mixing water before adding cement and aggregates.

2. Concrete & Mortar: Use in concrete, plaster, or mortar mixes where enhanced waterproofing and strength are desired. 

3. Curing: Follow standard curing practices after placement to develop full strength and waterproofing benefits. 

��️ Benefits at a Glance

 91 000 74051 Dr. Fixit Piditop 333 - Cementitious Floor Hardener is a high-performance, non-metallic floor hardener in dry powder form. It is applied to fresh concrete surfaces to create an extremely durable, dust-proof, and abrasion-resistant floor. Ideal for industrial areas, warehouses, parking garages, and ramps that face heavy vehicle traffic.
Key Benefits:
Extreme Durability: Creates a hard surface resistant to abrasion, scratches, and impacts.Resists Oil & Grease: Provides good resistance against oil and grease spills.Cost-Effective: Extends the life of concrete floors, reducing long-term maintenance costs.Dust-Proof: Eliminates surface dusting.Available in Colors: Comes in Natural, Light Grey, Dark Grey, and Green.Approximate Market Price: ₹399 - ₹499 per 25 kg bag (Please contact CIVILIZEMART for bulk pricing!)
Questions and Answers:Q1: What is Piditop 333 used for?A: It is used to harden and protect new concrete floors in areas with heavy traffic, such as warehouses, loading docks, parking garages, truck lanes, and industrial workshops.Q2: How is it applied?A: It is broadcast (sprinkled) evenly onto the surface of fresh concrete in two stages. After each application, the powder is worked into the surface using a power float or hand float to create a seamless, hardened top layer.Q3: How much product is needed per square meter?A: The dosage depends on traffic:Medium Traffic: 3-5 kg per square meterHeavy Traffic: 5-7 kg per square meterQ4: What is the approximate price?A: The approximate price for a 25kg bag is 399-499RS Contact us for the best rate, especially for larger projects.Q5: What are the main advantages over a plain concrete floor?A: It significantly increases the floor's surface hardness (Mohs scale 8-9), making it highly resistant to wear, abrasion, and dusting. It also offers better resistance to oils and grease.Q6: Is it available in colors?A: Yes, it is available in four colors: Natural, Light Grey, Dark Grey, and Green. This allows for both functional and decorative finishes.Q7: What is the shelf life?A: When stored in a sealed bag, away from direct sunlight, it has a shelf life of 12 months.Q8: What precautions should be taken during application?A:Apply in shaded conditions to prevent the concrete from drying too quickly.Control joints (grooves) must be cut into the floor after hardening to control cracking.Proper curing with water or a curing compound is essential for strength.Q9: Can it be applied on old concrete?A: No, Dr. Fixit Piditop 333 is designed to be applied only on fresh, wet concrete so it can integrate and cure as a single monolithic layer.

 91 00074051 MYK ReArm Crete RM - Polymer Modified Repair Mortar  is a ready-to-use, cement-based repair mortar fortified with polymers. It is designed for fixing cracks, holes, and damaged areas on concrete walls and ceilings, both indoors and outdoors. It offers easy application, high strength, and excellent adhesion, making it ideal for restoring concrete surfaces.
Key Benefits:
High Strength: Achieves high compressive strength quickly (10 N/mm² in 1 day).Easy to Use: Just mix with water; suitable for both hand and machine application.Excellent Adhesion: Bonds strongly to existing concrete surfaces.Shrinkage Compensated: Minimizes cracking after application.Versatile: For interior and exterior repair work on concrete and precast elements.Approximate Market Price: 550 - 750 per 25 kg bag (Contact CIVILIZEMART for best price!)
Questions and Answers:Q1: What is ReArm Crete RM used for?A: It is used for repairing cracks, spalls, and damaged areas on concrete walls, ceilings, and precast elements. It is suitable for both indoor and outdoor use.Q2: How is it mixed and applied?A: Simply add the powder to clean water and mix to a smooth, paste-like consistency. It can be applied by trowel or smoothing tool. The maximum recommended layer thickness is 20mm.Q3: What is the coverage area?A: Coverage depends on the repair depth. As a guide, a 25kg bag will cover approximately 0.5 to 1 square meter at a 20mm thickness.Q4: What is the approximate price?A: The approximate price for a 25kg bag is 550 TO 750. Please contact CIVILIZEMART us for the exact price and bulk order discounts.Q5: How strong is this repair mortar?A: It is very strong, achieving over 10 MPa (N/mm²) in 1 day and over 25 MPa after 28 days, ensuring a durable repair.Q6: What is the working time after mixing?A: The pot life is approximately 30 minutes at 18-20°C. Higher temperatures will shorten this time, so mix only as much as you can use within this period.Q7: Can it be used on exterior walls?A: Yes, it is suitable for both interior and exterior repair applications.Q8: What is the shelf life?A: It has a shelf life of 6 months from the date of production when stored in a cool, dry place in its original, unopened packaging.Q9: What safety precautions should be taken?A: Wear gloves and safety glasses. The product can be irritating to skin and eyes. Refer to the Material Safety Data Sheet (MSDS) for detailed safety information.

 91 000 74051 RUSTICIDE is a single component sulphate and chloride free liquid, which in one operation removes rust and prevents further rusting of steel. 

 91 000 74051 MYK ReArm Fix 10S - Instant Leak Stopping Cement (Fast Setting) is a chloride-free, rapid-setting cement that hardens instantly upon contact with water. It is specifically designed for emergency leak sealing in pipes, manholes, tunnels, and concrete structures. It can be used in its dry form or as a paste to plug active leaks quickly and effectively.
Key Benefits:
Instantly Stops Leaks: Sets immediately to plug running water leaks.Easy to Use: Can be applied directly as a dry powder or mixed into a paste.Chloride-Free: Safe for reinforced concrete, prevents corrosion.Versatile: Ideal for pipes, basements, manholes, and water tanks.Portable Packaging: Available in convenient 1kg and 12kg packs.
Approximate Market Price:12 kg Bag: 550 TO 790(Contact CIVILIZEMART for exact pricing!)
Questions and Answers: Q1: What is the primary use of ReArm Fix 10S?A: Its main use is for emergency leak sealing. It is perfect for instantly stopping active water leaks from burst pipes, in manholes, tunnels, and concrete walls.Q2: How do you use it to stop a leak?A: For active leaks, you can press the dry powder directly into the leak point. Alternatively, mix it with a little water to form a stiff paste; as soon as the mix feels hot, press and hold it firmly against the leak for 1-2 minutes until it sets.Q3: Does it work on active, flowing water leaks?A: Yes, that is its specialty. It is designed to set and harden even in the presence of water, making it highly effective for plugging active leaks.Q4: What is the approximate price?A:The approximate price for a 12 kg bag is 550 TO 790.Please message CIVILIZEMART us for the best price.Q5: Is it safe for concrete with steel reinforcement?A: Yes, it is chloride-free, which means it will not cause corrosion to steel reinforcement bars within the concrete.Q6: How fast does it set?A: It is an instant-setting product. It begins to harden within seconds to minutes upon contact with water.Q7: What pack sizes are available?A: It is available in convenient sizes: a small 1 kg pouch for minor repairs and a larger 12 kg bag for bigger jobs.Q8: What is the shelf life?A: It has a shelf life of 12 months from the date of manufacture when stored in a cool, dry place.Q9: What safety precautions should be taken?A: Always wear protective gloves and safety glasses. The product contains cement and can cause skin and eye irritation. Wash immediately with plenty of water if contact occurs.

 91 000 74051 Sika Chapdur (IN) is a one-part, premixed, coloured mineral dry-shake hardener used for concrete floors. When broadcast and worked into fresh concrete, it creates an extremely hard-wearing, abrasion-resistant, dust-proof surface. Ideal for areas subject to heavy mechanical wear like warehouses, parking lots, factories, service stations, public floors, and more. 
Key Features & BenefitsReady to use; simple application method. High wear resistance & impact resistance. Dust-proof surface; easy to clean. Non-metallic, rust-free formula. Increased resistance to oils and grease.
Q1. What is the coverage of one 30 kg bag?A: For heavy duty (~5.5-6.0 kg/m²), one 30 kg bag will cover approximately 5 to 5.5 m². For lighter duty, higher coverage.Q2. Can I apply this on any concrete/slab?A: The substrate concrete must be good quality, fully compacted, with slump in the range ~75-110 mm. Compressive strength of the concrete should be at least ~20 N/mm². Surface should be clean and free of weak laitance. Q3. How long before the floor can be used?A: Foot traffic after ~72 hours; full service (heavier loads) after ~7 days, when fully cured. Q4. Is this product suitable where oil / grease / chemical spillage happens?A: Yes — the product has increased resistance to oils and grease. However, frequent cleaning and maintenance are needed.Q5. What precautions should I take during application?A:Do not apply in strong wind or excessively dry air.Do not add water over the dry shake once applied.Spread in two stages for better blending: first ~60% then ~40%.Use proper finishing tools (trowels, power trowels) to compact and smooth.Cure immediately after finishing, protect from rain or contamination.

 91 000 74051 Product Name: ReArm Rust C (Formerly MYK Rust Convertor)What it is: A single-component, ready-to-use chemical solution designed to treat and convert stubborn rust on iron and steel surfaces into a stable, protective layer. It transforms rust (iron oxide) into an organo-complex compound, sealing the surface and preventing further corrosion.Primary Function: To provide a simple, effective solution for rust treatment without the need for expensive sandblasting or extensive surface preparation. It creates a moisture-repelling, abrasion-resistant coating that serves as an ideal base for topcoats of paint.
Key Features & Benefits (from TDS):Converts Rust: Chemically changes rust into a stable, protective black layer.Excellent Adhesion: Provides a strong bond for subsequent paint layers.Moisture Repellent: Forms a non-porous barrier that prevents moisture from reactivating the corrosion process.Abrasion Resistant: The converted layer has good mechanical stability.Cost-Effective: Eliminates the need for sandblasting in many cases.Easy Application: Simply brush or roll on after basic surface prep.
Q1: Do I need to sandblast the surface before applying ReArm Rust C?A: No. A key benefit of this product is that it eliminates the need for sandblasting. However, all loose and flaking rust must be removed using a stiff wire brush. The surface should be cleaned and degreased for the product to work effectively.Q2: How do I apply it?A:Prepare Surface: Remove loose rust with a wire brush. Clean and degrease the surface.Apply Product: Apply ReArm Rust C generously using a brush or roller.Drying/Curing: It dries to touch in 20 minutes but requires 24 hours to fully cure and complete the rust conversion process.Second Coat: For best results, a second coat is recommended.Topcoat: If applying an oil-based paint, wait 48 hours after the last coat of ReArm Rust C.Q3: What does it do to the rust?A: It does not remove the rust. Instead, it chemically converts the rust (iron oxide) into a stable, black, organo-complex compound that is moisture-repelling and acts as a protective layer.Q4: Can I paint over it?A: Yes. In fact, it is designed to be an ideal base for paint. Once fully cured (after 24-48 hours), you can apply most standard topcoats for additional protection and aesthetics.Q5: What is the shelf life?A: The product has a shelf life of 36 months (3 years) from the date of manufacture when stored in its original, sealed container in a cool, dry, shaded place.Q6: Is it safe to use?A: Caution Required. The product is corrosive and has a low pH (2 - 3.5). You must wear appropriate Personal Protective Equipment (PPE) including a face mask and rubber gloves. Avoid contact with skin and eyes. In case of contact, flush immediately with plenty of water and seek medical attention if necessary.Q7: What is the coverage area?A: The datasheet does not specify a coverage rate as it depends entirely on the rust profile and surface porosity. Heavily rusted, porous surfaces will require more product than lightly rusted, smooth surfaces.

 91 000 74051 Bostik Boscocem SBR – Styrene Butadiene Rubber (SBR) Latex Emulsion Additive designed for use with cement-based products like mortars, screeds, renders, and tile adhesives. It improves bond strength, flexural strength, durability, and waterproofing. When used in bonding slurries or polymer-modified mortars, it ensures long-lasting adhesion and reduced cracking in construction and repair applications.
Key Features & BenefitsImproves Bond Strength – Excellent adhesion for mortars, screeds, and tilesWaterproofing Additive – Reduces water absorption of cementitious mixesDurable & Flexible – Enhances tensile & flexural strength, resists shrinkage cracksChemical & Abrasion Resistance – Resists mild chemicals, wear, and freeze-thaw cyclesImproves Workability – Makes mixes smoother and easier to applyVersatile Uses – Renders, screeds, repair mortars, tile adhesives, bonding slurries
Technical SpecificationsAppearance: White emulsionSpecific Gravity: ~1.02pH: 7.8 – 10Mix Ratio (Bonding Slurry): 1:1 (Boscocem SBR : Cement by volume)Render Mix (6–8 mm thickness): 50 kg cement + 125 kg sand + 9 kg SBR+waterHeavy Duty Floor Screed (25–40 mm): 50 kg cement + 75 kg sand + 75 kg granite chips + 9 kg SBR+waterShelf Life: 12 months (stored cool & dry, unopened)Packaging: 1 L, 5 L, 20 L & 200 L drums
FAQ (Questions & Answers)
Q1. What is Boscocem SBR used for?It is used as a bonding agent, waterproofing additive, and modifier for cement mortars, renders, and screeds.Q2. Can it be used for tile fixing?Yes, it improves adhesion for ceramic, vitrified, and stone tiles.Q3. What is the mix ratio for bonding slurry?1 part SBR : 1 part cement (by volume).Q4. What thickness can be achieved with renders/screeds?Renders: 6–8 mmHeavy-duty screeds: 25–40 mmQ5. What are the available pack sizes?1 L, 5 L, 20 L & 200 L drums.Q6. What is the shelf life?12 months in sealed containers under dry, cool conditions.Q7. What is the approximate price OF Bostik Boscocem SBR ?A. Market price generally ranges from ₹2500 – ₹4200 per PIECE (20L). More Information Please Visit CIVILIZEMART

 91 000 74051 Bostik Boscocem SBR – Styrene Butadiene Rubber (SBR) Latex Emulsion Additive designed for use with cement-based products like mortars, screeds, renders, and tile adhesives. It improves bond strength, flexural strength, durability, and waterproofing. When used in bonding slurries or polymer-modified mortars, it ensures long-lasting adhesion and reduced cracking in construction and repair applications.
Key Features & BenefitsImproves Bond Strength – Excellent adhesion for mortars, screeds, and tilesWaterproofing Additive – Reduces water absorption of cementitious mixesDurable & Flexible – Enhances tensile & flexural strength, resists shrinkage cracksChemical & Abrasion Resistance – Resists mild chemicals, wear, and freeze-thaw cyclesImproves Workability – Makes mixes smoother and easier to applyVersatile Uses – Renders, screeds, repair mortars, tile adhesives, bonding slurries
Technical SpecificationsAppearance: White emulsionSpecific Gravity: ~1.02pH: 7.8 – 10Mix Ratio (Bonding Slurry): 1:1 (Boscocem SBR : Cement by volume)Render Mix (6–8 mm thickness): 50 kg cement + 125 kg sand + 9 kg SBR+waterHeavy Duty Floor Screed (25–40 mm): 50 kg cement + 75 kg sand + 75 kg granite chips + 9 kg SBR+waterShelf Life: 12 months (stored cool & dry, unopened)Packaging: 1 L, 5 L, 20 L & 200 L drums
FAQ (Questions & Answers)
Q1. What is Boscocem SBR used for?It is used as a bonding agent, waterproofing additive, and modifier for cement mortars, renders, and screeds.Q2. Can it be used for tile fixing?Yes, it improves adhesion for ceramic, vitrified, and stone tiles.Q3. What is the mix ratio for bonding slurry?1 part SBR : 1 part cement (by volume).Q4. What thickness can be achieved with renders/screeds?Renders: 6–8 mmHeavy-duty screeds: 25–40 mmQ5. What are the available pack sizes?1 L, 5 L, 20 L & 200 L drums.Q6. What is the shelf life?12 months in sealed containers under dry, cool conditions.Q7. What is the approximate price OF Bostik Boscocem SBR ?A. Market price generally ranges from ₹2500 – ₹4200 per PIECE (20L). More Information Please Visit CIVILIZEMART